• Journal of Conservation Science
• /
• v.38 no.4
• /
• pp.289-300
• /
• 2022

In the 6^th and 7^th centuries, 5 iron artifacts excavated form the Baekje Stone Tomb in Guryong-ri site, Ungcheon, Boryeong, were studied. The sample were metal microscopic observation, SEM-EDS analysis and Raman micro-spectroscopy analysis were conducted to understand the metallurgical characteristics. The microstructure observation showed the presence of ferrite and pearlite throughout, and differences in carbon content existed depending on the direction. Non-metallic inclusions were in the form of long lines, and most of them were wüstite, fayalite. It is indicated that the artifacts were forge welded using hypoeutectoid steel, with signs of carburizing and decarburizing processes. Some crystals with high P₂O₅, TiO₂, CaO content were identified as sarcopside, ulvöspinel, and perovskite, respectively, through Raman spectroscopy. A comparison of the results with previous studies on the sites of Bujang-ri site in Seosan and Bongseon-ri site in Seocheon, which are adjacent sites in the coastal area, revealed that, while heat treatment technology was available, the artifacts were not heat-treated considering the purpose for use for these artifacts. The chemical composition of the non-metallic inclusions P₂O₅, TiO₂, CaO were plotted in proportions to SiO₂ and compared with adjacent sites. Considering that the P₂O₅/SiO₂ ratio was widely distributed, the refining technology was not uniform. In addition, the TiO₂/SiO₂ ratio was found to be higher than that of other sites, meaning that a titanium-containing ore was used to manufacture the artifacts, unlike in surrounding sites, but it is not detected in all artifacts, so it may have been affected by various factors such as furnace walls in addition to raw materials. Although slag formers were used, considering the CaO/SiO₂ ratio and the (Al₂O₃/SiO₂)/(CaO/SiO₂) ratio, which appear to be similar to the surrounding sites, but it is possible that CaO containing raw ore was used because it is also affected by the components of raw ore. As a result of the study, it is highly likely that ore different from that of the surrounding sites was used for production, but a more comprehensive comparative study with the surrounding sites is needed in the future.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.3 no.2
• /
• pp.91-96
• /
• 2010

The artifacts in sonography is not always harmful. Sometimes it is beneficial for the evaluation of the water contents of the soft tissue and estimating the degree of inflammation and character of the regenerated tissue indirectly using artifacts such as acoustic shadowing and the enhanced transmission. It can also be useful to evaluate the possibility of aspiration of the calcifies masses by knowing of the contents of the water among them. Unlike the MRI it is useful to get real time informations with low cost in diagnosis and treatment of the soft tissue disease usinf artifacts in sonography.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.581-588
• /
• 2019

MRI is superior when contrasted to help the organization generate artifacts resolution, but also affect the diagnosis and create a image that can not be read. Metal is inserted into the tooth, it is necessary to often be inhibited in imaging by causing the geometric distortion due to the majority and if the difference between the magnetic susceptibility of a ferromagnetic material or paramagnetic reducing them. The purpose of this study is to conduct a metal artefact in accordance with the analysis using a diamagnetic material. The magnetic material include a wire for the orthodontic bracket and a stainless steel was used as a diamagnetic material was used copper, zinc, bismuth. Testing equipment is sequenced using 1.5T, 3T was used was measured using a SE, TSE, GE, EPI. A self-produced phantom material was used for agarose gel (10%) to a uniform signal artifacts causing materials are stainless steel were tested by placing in the center of the phantom and cover inspection of the positive cube diamagnetic material of 10mm each length.After a measurement artefact artifact zone settings area was calculated using the Wand tool After setting the Low Threshold value of 10 in the image obtained by subtracting images, including magnetic material from a pure tool phantom images using Image J. Metal artifacts occur in stainless steel metal artifact reduction was greatest in the image with the bismuth diamagnetic materials of copper and zinc is slightly reduced, but the difference in degree will not greater. The reason for this is thought to be due to hayeotgi offset most of the susceptibility in bismuth diamagnetic susceptibility of most small ferromagnetic. Most came with less artifacts in image of bismuth in both 1.5T and 3T. Sequence-specific artifact reduction was most reduced artifacts from the TSE 1.5T 3T was reduced in the most artifacts from SE. Signal-to-noise ratio was the lowest SNR is low, appears in the implant, the 1.5T was the Implant + Bi Cu and Zn showed similar results to each other. Therefore, the results of artifacts variation of diamagnetic material, magnetic susceptibility (${\chi}$) is the most this shows the reduced aspect lower than the implant artificial metal artifacts criteria in the video using low bismuth susceptibility to low material the more metal artifacts It was found that the decrease. Therefore, based on the study on the increase, the metal artifacts reduction for the whole, as well as dental prosthesis future orthodontic materials in a way that can even reduce the artifact does not appear which has been pointed out as a disadvantage of the solutions of conventional metal artifact It is considered to be material.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.297-300
• /
• 2002

In this paper, we propose a post-processing method to reduce the blocking artifacts. We perform the post-processing only in the spatial domain so that it is readily applicable to real-time video decoder. Many approaches proposed so far for deblocking deal with only The luminance signal. but here we propose processing the chrominance signals as well since the low bit rare application where the blocking artifacts are most problematic suffers significantly from the color misalignment caused by blocking artifacts occurring to chrominance data as well. The proposed method is composed of low pass filtering in two steps considering the edge direction. The first step is the IIR low pass filtering in the diagonal direction, and the second step is another IIR low pass filtering in horizontal and vertical directions.

• Journal of the Korean Society of Costume
• /
• v.58 no.5
• /
• pp.232-246
• /
• 2008

The museum starts from drawing many visitors by opening remarkable exhibitions, and finally aims to realize the social and educational value. However artifacts on exhibition have antithetic conditions like limitation of collection, problems of preservation, etc. Already the museum exhibited paintings and fine arts reproduced with complete fidelity, so artistic artifacts have meet the aims of exhibition. we would like to make an alternative proposal about costume relics in this way. Costume relics need to reproduce in two ways. The one way is to reproduce with complete fidelity and the other way is to restore the original form. The reproduction and restoration need a concrete survey, historical research, textile like artifacts. Furthermore it is important to reconstruct breakage and discoloration. Permanent exhibition consisted of reproductions helps appreciating as well as protecting artifacts, so exhibition effect will be enhanced.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.4
• /
• pp.299-306
• /
• 2019

We estimated the provenance of the obsidian artifacts from Samgeori site at Yeoncheon, one of the prehistoric sites in South Korea. Pyroxene microlites are of hedenbergite to augite compositions, and intergrown and/or overgrown with Fe-oxides showing poikilitic texture. Major oxides contents for the matrix of the obsidian artifacts exhibit a narrow compositional range, especially SiO₂ contents being 73.0~75.5 wt.% of acidic rhyolitic composition. Also, rare earth element (REE) contents are relatively constant in the obsidian artifacts, and the chondrite-normalized REE patterns show a strong Eu negative anomaly. These mineralogical and geochemical features of the Samgeori obsidian artifacts were compared with those from both the Baekdusan obsidians and Japanese Kyushu obsidians which have been thought to be two major obsidian provenances around South Korea. It is suggested that the Samgeori obsidian artifacts were possibly originated from the Baekdusan obsidians.

• Journal of Magnetics
• /
• v.17 no.2
• /
• pp.145-152
• /
• 2012

Patients who underwent hip arthroplasty using the conventional fat suppression technique (CHESS) and a new technique (IDEAL) were compared quantitatively to assess the effectiveness and usefulness of the IDEAL technique. In 20 patients who underwent hip arthroplasty from March 2009 to December 2010, fat suppression T2 and T1 weighted images were obtained on a 3.0T MR scanner using the CHESS and IDEAL techniques. The level of distortion in the area of interest, the level of the development of susceptibility artifacts, and homogeneous fat suppression were analyzed from the acquired images. Quantitative analysis revealed the IDEAL technique to produce a lower level of image distortion caused by the development of susceptibility artifacts due to metal on the acquired images compared to the CHESS technique. Qualitative analysis of the anterior area revealed the IDEAL technique to generate fewer susceptibility artifacts than the CHESS technique but with homogeneous fat suppression. In the middle area, the IDEAL technique generated fewer susceptibility artifacts than the CHESS technique but with homogeneous fat suppression. In the posterior area, the IDEAL technique generated fewer susceptibility artifacts than the CHESS technique. Fat suppression was not statistically different, and the two techniques achieved homogeneous fat suppression. In conclusion, the IDEAL technique generated fewer susceptibility artifacts caused by metals and less image distortion than the CHESS technique. In addition, homogeneous fat suppression was feasible. In conclusion, the IDEAL technique generates high quality images, and can provide good information for diagnosis.

• The KIPS Transactions:PartD
• /
• v.18D no.6
• /
• pp.451-460
• /
• 2011

The ability to trace change history and dependency relations of software artifacts which are continuously changed has been recognized as an important factor that support quality management activities such as verification, validation, and testing in software system development process. General software configuration management systems provide tracing information for artifacts only within the configuration management system, and it does not go further to changes that occur within personal workspace. This paper provides a solution that helps tracing down not only changes of configuration items but also change history of artifacts existent in personal workspace through the integration of configuration management system and personal workspace. Furthermore, in cases of artifacts which are included in a configuration item, this paper provides a solution that support tracing dependency relations between the artifacts by identifying their version links. For the integration of configuration management system and personal workspace, a revision of configuration item is connected to the artifact's version of the workspace by the tagging mechanism, and traceability for change history and dependency relations of artifacts can be managed more effectively through integrated change process.

• Journal of Information Management
• /
• v.41 no.1
• /
• pp.145-172
• /
• 2010

National artifacts has the same physical characteristics to general artifacts and the evidential value which was produced during the public working. National artifacts different from paper and electronic records about physical properties. So it should be doing the expanded process. In this study, the ISAD(G), MODS, RAD and CDWA based on Korean Record Management Law by comparing and analysing of the technical elements was being extracted, The descriptive elements of national artifacts is pull by conclusion of the analysis.

• Korean Journal of Materials Research
• /
• v.20 no.2
• /
• pp.82-89
• /
• 2010

Benzotriazole (B.T.A) which has been mainly used for the stabilization processing method of excavated copper and bronze artifacts is vaporized within 2~3 years after the usage because it is unstable at the acid conditions and cannot protect the surface of artifacts. In this study, NaOH method which has been used for the steel artifacts was applied as a stabilization process for the method of copper and bronze artifacts to gush chlorine ion out. For the reproduction of excavated samples, copper and bronze plates were dipped in 0.1M HCl for 26 hrs to form CuCl, rusted at $70^{\circ}C$ with RH 75% for the formation of corrosion products, and desalted in 0.1 M NaOH solution. The concentration of chlorine ion was measured by using ionchromatography. During the desalting process, a large quantity of chlorine ions was gushed out in early period and corrosion products were not additionally generated through the re-corrosion experiment. This NaOH desalting process was found to be a method of stabilization process for copper and bronze artifacts from the formation of Tenorite (CuO) during desalting as a protection layer for corrosion.