• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.138-143
• /
• 2005

Recently, it is much more required to approach the accurate shaft alignment analysis according to the tendency of active showing in large container vessel and that of the heavy weight of propeller in connection with it. Shaft alignment calculation lies upon how the pressure apply on bearings properly in operation of main engine and how the stress of shaft puts within that of limit of bearing material and how the movement of shaft is prospected owing to propeller forces and moments. Therefore, we have conducted the shaft alignment calculation of very large container vessel considering the deformation of hull structure and the propeller forces and moments and the static and dynamic condition of shaft. The calculation results show the pressure distribution of aft bush and the movement of shaft in bearing. The shaft alignment calculation helps the stable application of shaft alignment, which was proved in sea trial.

• 한국BIM학회 논문집
• /
• 제5권4호
• /
• pp.11-22
• /
• 2015

Government efforts for green growth policy initiatives demand low-carbon technologies in the road construction industry. The purpose of this paper is to develop an algorithm of a road alignment design solution for establishing the multi-dimensional information, and to calculate carbon emission quantity due to the geometric design elements in the planning phase of road alignment. The paper developed a calculation method for carbon emission quantity by drawing a speed profile reflected in the operating speed, acceleration and deceleration, which are majors factor of carbon emissions while driving and by applying a carbon emission factor. From this effort, it enabled alignment planning to reduce carbon emission. Object-based parametric design methods of the cross-sections were proposed for alignment planning, and the paper demonstrated a BIM-based road alignment planning solution. The proposed solutions can provide multi-dimensional information on carbon emission quantity and cross section elements through driving simulation. It is expected to allow construction of eco-friendly roads by deriving optimal road alignment to minimize environmental costs.

• 제어로봇시스템학회논문지
• /
• 제15권9호
• /
• pp.887-893
• /
• 2009

In this paper, a mask-panel alignment robot system is considered for IT industry applications. Two kinds of solutions are suggested which are required in constructing a control system for the alignment robot with actuation redundancy. First, the kinematic solution for the 4PPR parallel positioning mechanism is formulated for an arbitrary initial posture, which relates the mask-panel misalignment in the task space and the desired actuator displacements in the joint space. Secondly, in order to increase the stiffness of the control motion and also to avoid the mechanical lock which may happen due to the redundant actuation, a new synchronous control method is proposed which has the merit of coordinating joint control motions while not losing individual joint control performance. In addition, the engineering process to develop a visual alignment robot system is described with the results of experimental setup and GUI software. Finally, the experimental results demonstrate the effectiveness of the proposed alignment system control methodology and how much beneficial it will be in real industrial applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.513-516
• /
• 2007

We introduce a new copolymer alignment film made by bridge-building structure. It is a better film to decrease the image-sticking level in LCD displays. It is noted that the image-sticking was decreased by preventing ion mixing between inter-layers through high hardness. We have investigated the electrical characteristics such as pretilt angle, Residual DC, VHR by changing cure temperature and process delay time conditions of the new alignment film. In this paper, we have investigated the solution for the deep-rooted image defect and incidentally got a contrast ratio improvement by high anchoring force and hardness elevation through the new copolymer alignment film.

• 한국경영과학회지
• /
• 제36권2호
• /
• pp.67-88
• /
• 2011

This study empirically investigated the effects of knowledge management(KM) strategic alignment on the KM activities as well as the product and process innovation of manufacturing firms. Based on the framework, which employs the usage levels of target costing systems(TCS) and information technology(IT) infrastructure, four types of KM strategies were identified and proposed：mixed, explorative, exploitative and negative strategies. In this research, these four types of KM strategies were empirically validated. According to the results of this study, it was found that when a explorative KM strategy is aligned with a low-cost strategy, KM activities are activated and the degree of a process innovation is increased. It was observed that in the case of the alignment between a differentiation strategy and a exploitative KM strategy, both KM activities and the level of a product innovation are enhanced. The results also demonstrated that for the enhancement of both a process and a product innovation through the activation of KM activities, a mixed KM strategy must be aligned with a composite business strategy, which focuses on a low-cost as well as a differentiation strategies. Accordingly, it is concluded that the KM activities and the levels of the product and process innovation can be activated or improved with the alignment of the KM strategies and business strategies.

• 한국항공우주학회지
• /
• 제31권10호
• /
• pp.105-111
• /
• 2003

위성체 정렬은 위성체 조립 및 시험과정에서 중요한 부분이다. 인공위성이 우주궤도상에서 성공적인 임무를 수행하기 위해서는 자세제어 및 탑재체용 부분품들에 대하여 측정허용오차 $0.1^{\circ}{\sim}0.7^{\circ}$의 정밀하고 정확한 측정이 요구되며 정렬된 상태에서의 위성체 좌표계의 정확한 방향좌표를 측정하여 지상에 위치한 위성체 관제부에서 위성체의 자세제어 등에 사용하도록 제공하게 된다. 본 논문에서는 자동시준에 의한 위성체 정렬 측정 이론에 대하여 기술하고 데오도라이트를 사용하여 위성체 정렬을 측정할 수 있는 측정방법 및 그 측정 결과에 대하여 고찰해 보고자 한다.

• 한국항공우주학회지
• /
• 제39권8호
• /
• pp.796-803
• /
• 2011

정지 상태에서 관성항법장치를 구성하는 가속도계 및 자이로 측정치를 이용하여 초기 자세를 구하는 것을 초기정렬 혹은 자가정렬이라 한다. 초기정렬의 정밀도는 관성항법장치에 탑재되는 관성센서의 성능에 의하여 결정되며 수평축 자세는 수평축 가속도계, 수직축 자세는 E축 자이로 성능에 의해 결정된다. 그러므로 관성센서에서 발생된 불확실한 오차는 초기정렬의 정밀도를 저하시키는 주요원인이 된다. 논 논문에서는 관성센서의 불확실한 오차 중에서 관성항법장치에 전원이 인가되어 온도가 안정화 되는 상태에서의 관성센서 오차가 초기정렬 성능에 어떠한 영향을 미치는 가를 이론적으로 분석하고 시뮬레이션을 통하여 검증한 결과를 제시한다.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3703-3716
• /
• 2022

Target alignment technology is one of the most critical technologies in laser fusion experiments and is an important technology related to the success of laser fusion experiments. In this study, by combining the open-loop and closed-loop errors of the target alignment, the Kalman state observer is used to estimate the position of the target, which improves the observation precision of the target alignment. Then the optimized result is used to guide the alignment of the target. This method can greatly optimize the target alignment error and reduce uncertainty. With the improvement of the target alignment precision, it will greatly improve the reliability and repeatability of the experiments' results, thereby improving the success rate of the experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.856-859
• /
• 1996

In this paper, a coarse alignment algorithm for strapdown inertial navigation system is proposed and evaluated analytically. The algorithm computes roll and pitch angles of the vehicle using accelerometer outputs, and then determines yaw angle with gyro outputs. It is referred, as two-step coarse alignment in this work. With the geometric relation between sensor outputs and roll, pitch and yaw angles, the algorithm error is analytically derived and compared with the previous coarse alignment algorithm introduced by Britting. The results show that the proposed two-step coarse alignment algorithm has better performance for pitch angle computation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.302-302
• /
• 2000

This paper presents the measurement and correction of PCB alignment errors for PCB-manufacturing machines. The conventional PCB-manufacturing machine doesn't have enough accuracy to accommodate the demand for high-resolution circuit pattern and high-density mounting capacity of electronic chips. It is because of alignment errors of PCB loaded to the PCB-manufacturing machine. Therefore, this study focuses on the development of the system which is able to measure and correct alignment errors whit high-accuracy. An automatic optical inspection part measures the PCB alignment error using two cameras, and the high-accuracy 3-axis stage makes correct of these error. The operating system is run in the environment of Window 98 (or NT). Finally we implemented this system to PCB screen printer and PCB exposure system.