• Korean Journal of Heritage: History & Science
• /
• v.49 no.1
• /
• pp.146-165
• /
• 2016

With the introduction of the system of recognizing masters of craft and performance skills in 1970, the principle of "preserving the original form," which was already in general use, was adopted as a legal principle in the Cultural Heritage Protection Act. While the concept "original form" can be related to tangible elements of heritage through the Act, the intangibility of craft and performance skills does not allow their pinpointing at a particular temporal period or the identification of a particular master from the past as the basis of an original form. Therefore, those craft or performance skills that are available at the point of recognition of relevant masters must serve as the basis of the original form for the intangible heritage concerned. This means that the principle of preserving the original form of intangible heritage has been implemented not based on a fundamental form of materiality, but rather on the craft or performance skills that may be held by a master at the time of his/her recognition as a "temporary original form." This principle has been observed through intangible heritage transmission and education policies for recognized masters and their trainees, contributing to establish an elitist transmission environment in which public were denied to join the education on intangible heritage. Even with policies guided by the principle of preserving the original form, designated craft and performance skills have been transformed contingent upon given social and environmental conditions, thus hindering the preservation of the original form. Despite the intrinsic limitations of the principle of preserving the original form when applied to intangible heritage, this principle has served as a practical guideline for protecting traditional Korean culture from external influences such as modernization and Westernization, and also as an ultimate goal for the safeguarding of intangible heritage, engendering actual policy effects. The Act on the Safeguarding and Promotion of Intangible Cultural Heritage that comes into effect in March 2016 takes the constantly evolving nature of intangible heritage into consideration and resultantly adopts a concept of "essential form" (jeonhyeong) in place of "original form" (wonhyeong). This new concept allows for any transformations that may take place in the environment surrounding the intangible heritage concerned, and is intended to mitigate the rigidity of the concept of "original form." However, it should be noted that "essential form," which is manifested as the unique significance, knowledge, and skills delivered by the intangible heritage concerned, should be maintained according to the guidelines and principles related to heritage conservation. Therefore, the new concept can be understood not as a rupture, but more as a continuum of the concept of "original form."

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.2
• /
• pp.72-80
• /
• 2019

Purpose: The purpose of this study is to compare and analyze the shear bond strength and fracture pattern in different enamel tooth surface treatments for resin splinting materials. Materials and Methods: G-FIX and LightFix were used as tooth splinting materials. Twenty bovine mandibular incisors were used for the preparation of the specimens. The exposed enamel surface was separated into four parts. Each tooth was treated with 37% phosphoric acid, 37% phosphoric acid + adhesive resin, 37% phosphoric acid + G-premio bond, and G-premio bond for each fraction. Shear bond strength was measured using a universal testing machine. After measuring the shear bond strength, the fractured surface of the specimen was magnified with a microscope to observe the fracture pattern. Two-way ANOVA was used to verify the interaction between the material and the surface treatment method. One-way ANOVA was used for comparison between the surface treatment methods of each material and post-hoc test was conducted with Scheffe's test. An independent t-test was conducted to compare shear bond strengths between materials in each surface treatment method. All statistics were conducted at 95% significance level. Results: G-FIX, a tooth splinting resin, showed similar shear bonding strength when additional adhesive resins were used when material was applied after only acid etching, and LightFix showed the highest shear bonding strength when additional adhesive resins were used after the acid etching. In addition, both G-FIX and LightFix showed the lowest shear bond strength when only self-etching adhesive was applied without additional acid etching. Verification of interactions observed interconnection between resins and surface treatment methods. Most of the mixed failure was observed in all counties. Conclusion: When using G-FIX and LightFix, which are tooth-splinting materials, it is considered that sufficient adhesion will be achieved even after applying only acid etching as instructed by the manufacturer.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.2
• /
• pp.97-104
• /
• 2019

This experiment was conducted to investigate the effect of whole crop rice (WCR) based TMR on growth performance and carcass characteristics of Hanwoo steers. WCR "Yeongwoo"was harvested at yellow ripen stage and ensiled for 60 days. The crude protein (CP), acid detergent fiber (ADF), neutral detergent fiber (NDF), in vitro dry matter digestibility (IVDMD) and total digestible nutrient (TDN) content was 8.4 %, 28.0 %, 53.8 %, 72.4 % and 66.8 %, respectively. For silage quality, pH was 4.37 and lactic and butyric acid content were 2.84 and 0.04 % in DM. Sixteen Hanwoo steers (8-mon-old) were allocated into either a control (commercial TMR) and WCR-TMR (WCR-based TMR) group. The TMR were fed according to the feeding stage phase: growing (Initiate~14 month), early fattening (15 month~21 month) and late fattening (22 month~30 month). The body weight of control group increased (P<0.05) until early fattening stage, but late growing stage of WCR-TMR group was higher than that of control (P<0.05). Average daily gain (ADG) was significantly greater (P<0.05) in WCR-TMR group (total 0.78 kg/head) compared to control (total 0.66 kg/head) except for late fattening stage. The marketing weight and carcass weight were higher in WCR-TMR group (726 vs 765 kg; 417.8 vs 450.4 kg). The back fat thickness (11.75 vs 13.00 mm), Longissimus dorsi area (88.00 vs $89.88cm^2$) and yield index (65.87 vs 64.30) were not different between the two groups (P>0.05) and also no difference in meat yield grade (A : B : C = 2 : 4 : 2). Marbling score (4.00 vs 4.13), meat color (4.75 vs 4.75), fat color (3.13 vs 2.88), texture (1.25 vs 1.50) and maturity (2.00 vs 2.00) were not significant difference between the two groups and meat quality grade ($1^{{+}{+}}:1^+:1:2:3=0:2:4:2:0$) was also not different. In conclusion, TMR feeding based on WCR silage showed superiority in carcass yield and ADG compared to control TMR. It is considered that the use of WCR for feed is a necessary option for the substitution of the imported forages and the government's policy for rice production adjustment.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.2
• /
• pp.105-113
• /
• 2019

A two-year study was conducted from 2017 to 2018 by the establishment of a test field at Chungju-si and Cheongyang-gun. Plant height, number of leaves, insects and diseases, and fresh and dry matter yields for corn hybrid('Kwangpyeongok') were investigated. Daily average, maximum, and minimum temperature, monthly average temperature, daily precipitation, and sunshine duration during the growing season were investigated. We selected climate-critical factors to corn productivity and conducted an evaluation of vulnerability to climate change from 1999 to 2018 for both regions. In 2018, the dry matter yield of forage corn was 6,475 and 7,511 kg/ha in Chungju and Cheongyang, respectively, which was half of that in 2017. The high temperature and drought phenomenon in the 2018 summer caused the corn yield to be low. As well as temperature, precipitation is an important climatic factor in corn production. As a result of climate impact vulnerability assessment, the vulnerability has increased recently compared to the past. It is anticipated that if the high temperature phenomenon and drought caused by climate change continues, a damage in corn production will occur.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.460-471
• /
• 2019

The aim of this study was to examine the scale and market share of Chinese's research facility & equipment in the domestic research equipment market of basic and analytical science field for analyzing the difference of the number and amount of construction by year of acquisition, national research facility equipment standard classification code, and type of institution based on the information of the research equipment invested by the Korean government for the past 14 years. In addition, we analyzed the correlation among the year of acquisition, equipment standard classification code, and type of institution variables. As of January 1 2019, from 2005 to 2018, 50 Chinese's research facilities & equipments (main equipment with a construction cost of 30 million won or more) built in the basic and analytical science fields were selected for this study and their number of construction, amount of construction, year of acquisition, type of institution, and standard classification code were analyzed. Differences of the number and amount of construction with-in and by year of acquisition, standard classification code, and type of institution were tested using a single sample Chi-square test, Mann-Whitney U test, and Kruskal-wallis test. The correlation among the three variables was analyzed by using the Chi-square test of cross-tabulation analysis. And there was a statistically significant correlation among the year of acquisition, standard classification code, and type of institution (p<.05). Compared to the 2000s, in the 2010s, high-priced Optical Electronics/Video Equipment was installed at private universities, private enterprises, and government-affiliated research institute. Therefore, the domestic construction status of Chinese's research facility & equipment in the basic science and analytical science field is less than that of the domestic ones, but the number and the amount of construction are increasing statistically. So it is necessary for the government to be able to recognize the possibility that the Chinese's research facility and equipment can encroach on the domestic research industry market and to prepare related provision.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.18 no.2
• /
• pp.43-49
• /
• 2018

Maple syrup urine disease (MSUD, OMIM#248600) is a rare and autosomal recessively-inherited metabolic disorder that is caused by mutations in the branched-chain ${\alpha}$-ketoacid dehydrogenase (BCKDH) genes. It prevents the normal breakdown of branched-chain amino acids (BCAAs), such as leucine, isoleucine, and valine, and leads to poor feeding, lethargy, abnormal movements, seizure, and death if untreated. Here, we report the case of a Korean newborn of biochemically- and genetically-confirmed MSUD manifesting lethargy and central apnea, the acute state of which was successfully treated. The molecular genetic investigation revealed two novel heterozygous mutations (p.Ala32Phefs*48 and p.Val 130Phe) in BCKDHB, and both parents were confirmed as carriers. We emphasize the importance of early diagnosis and prompt introduction of specific treatment for MSUD in life saving and prognosis.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.199-208
• /
• 2019

This study reports water-resistant oil-in-water (O/W) emulsion-based sunscreening formulations prepared using a poly(ethylene glycol)-poly(${\varepsilon}$-caprolactone)-poly(ethylene glycol) (PEG-PCL-PEG) triblock polymeric surfactant. As a result of a variety of outdoor recreational activities such as swimming and hiking, consumer needs for development of advanced water-resistant sunscreen formulations are increasing. Water-resistant sunscreens are mostly based on water-in-oil (W/O) emulsions, because they should not be wiped off by water or sweat. However, the W/O emulsion formulations have a disadvantage in that the feeling of use is oily and difficult to remove. On the other hand, the O/W emulsion formulations are excellent in achieving the better skin feel as well as the easier removal. However, it is difficult to provide the O/W emulsion formulations with the water-repelling performance, since re-emulsification likely occurs upon getting touch with water. To solve this problem, this study proposes a O/W emulsion-based sunscreen formulation, a triblock polymeric surfactant having relatively high interfacial tension HLB value (~ 10). This allows the sunscreen formulations to exhibit the improved water repellence function by preventing their re-emulsification. The sunscreen formation system prepared in this study would be useful for diversification of functional sunscreen products, taking advantages of its excellent emulsion stability, UV protection performance, long lasting water-resistant function and selective cleansing effect with only foam cleanser.

• Journal of Wetlands Research
• /
• v.21 no.2
• /
• pp.102-113
• /
• 2019

Slack-tide sampling was carried out at 6 stations at high and low tide for a tidal cycle during spring tide of the early summer (June) and summer (July, August) of 2016 to determine the difference of water quality according to tide in Masan Bay, Korea. The mixing regime of all the water quality components investigated was well explained through the correlation with SAL. In the early summer and summer, TURB, DSi and NNN which mainly flow into the bay from the streams and SS, COD, AMN and $H_2S$ which mainly indicate the internal sink and source materials have a property of conservative mixing and non-conservative mixing, respectively. The conservative mixing showed a good linear relationship of the water quality between high and low tide, and the non-conservative mixing showed a variation of different pattern each other. Factor analysis performed on the concentration difference data sets between high and low tide helped in identifying the principal latent variables for them. In early summer, multiple effects (tidal action, natural influx and internal sinks and sources etc.) acted in combination for the differences to be distributed evenly in four factors (VF1~4), since there were few allochthonous inputs as a low-water season. On the contrary, in summer, the parameters showing large concentration difference at ST-1 affected by stream water were concentrated in one factor (VF1) and clearly distinguished from the parameters affected by the internal sinks and sources. In fact, there is no estuary (bay) that always maintains steady state flow conditions. The mixing regime of an estuary might be changed at any time due to the change of flushing time, and furthermore the change of end-member conditions due to the internal sinks and sources makes the occurrence of concentration difference inevitable. Therefore, when investigating the water quality of the estuary, it is necessary to take a sampling method considering the tide to obtain average water quality data.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.2
• /
• pp.54-65
• /
• 2019

China government recently tries to preserve not only the famous national historic-culture cities, but also the small and medium-sized cities due to the damages and destruction of the cities by the rapid economic development, urban expansion and the development of tourism industry. Hence, this study chose 'Zhoucun ancient mall' which is one of the hotness of cultural heritage located in a mid-sized city named 'Zhoucun district Zibo city Shandong province' that has continuously cared historical landscapes by the protective policy regarding the city as a historic-culture resource from '80s, and considered the character of the city's development process on how the historical landscapes were well protected. In fact, the protection policy in Zhoucun ancient mall had been started in early '80s, however, the viable plan was established in 2001 entitled 'Historical block protection planning of Zhoucun Da street'. And then, 'Regulatory plan for the ancient mall site of Zhoucun Da street' established in 2008 has expanded the area of the blocks for protection. However, this plan organized area only block-by-block so that the small blocks couldn't have the unity when expanded. Later in 2015, 'Regulation Organization Plan' hastried to expanded the protect-area to solve the unity problem. As a result of the study, the historical landscape management plan of Zhoucun in Zibo city has been systematically changed in 2001 after. In other words, this 2001's plans established buffer zones for the maintenance of protected areas and the surrounding environment. And then the detailed regulatory plan for 2008 led to a concrete urban management plan. After that, in 2015, it was found that the expansion plan to protect and manage the whole area of Zhoucun disrict is to manage the landscape of the surrounding area including the historical landscape of 'Zhoucun ancient mall'.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.2
• /
• pp.152-171
• /
• 2019

In this study, we analyzed the characteristics of the cold air generated in Hannamgeumbuk and Geumbuk-Jeongmaek and proposed their management strategies. We also suggested management strategies after analyzing detailed cold airflows for Cheongju located Hannamgeumbuk-Jeongmaek and we compared the degree of nighttime temperature reduction of the Jeongmaek by using data obtained from observatories located on Cheongju. We used KALM(Kaltluftabflussmodell), a cold air simulation model developed in Germanay and identified both cold airflows and altitude of cold air layers generated during 360minutes at night. As a result, the cold airflow generated in the Jeongmaek became strong and the cold air was appeared clearly in the western part of the Hannamgeumbuk-Jeongamek and in the northern part of the Geumbuk-Jeongmaek. The average velocity of cold airflow was recorded at 0.45m/s, and the maximum speed of cold airflow was recorded at 2.70m/s. The average height of the cold air layer was 104.27m/s and the maximum thickness was 255.0m. The average velocity of cold airflows in Cheongju was 0.51m/s and the average height of cold air layer was 48.87m high. The highest degree of nighttime temperature reduction appeared in the Cheongnamdae observatory($-3.8^{\circ}C$), where the altitude of the cold air layer is high. The results showed that cooling effect of Jeongmaek actually affected the temperature reduction during nighttime. Based on the results, we designated the main mountain area of the Jeongmaek with active cold air generation as "cold air conservation areas" and proposed the current forest and topography conservation. We also proposed to designate areas that facilitate the cold airflows as "cold air management areas" and to complement the function of Jeongmaek. This study could support the establishment of systematic management plans of the Jeongmaek. In addition, it is expected that the results can be applied as basic data for ventilation paths of Cheongju.