• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.286-288
• /
• 2007

In this paper, the fast locking PLL Frequency Synthesizer with low phase noise in a 0.18um CMOS process is presented. Its main application IS for the 915MHz ISM band wireless transponder upon the CPFSK (Continuous Phase Frequency Shift Keying) modulation scheme. Frequency synthesizer, which in this paper, is designed based on self-biased techniques and is independent with processing technology when damping factor and bandwidth fixed to most important parameters as operating frequency ratio, broad frequency range, and input phase offset cancellation. The proposed frequecy synthesizer, which is fully-integrated and is in 320M $^{\sim}$ 960MHz of the frequency range with 10MHz of frequency resolution. And its is implemented based on integer-N architecture. Its power consumption is 50mW at 1.8V of supply voltage and core area is $540{\mu}m$ ${\times}$ $450{\mu}m$. The measured phase noises are -117.92dBc/Hz at 10MHz offset, with low settling time less than $3.3{\mu}s$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.76-81
• /
• 1999

The demand for non-specific frequency without licence is increasing rapidly due to the advance of radio communication technologies and the growth of economic life. This paper was investigated the tendencies of non-specific frequency and non-licensed radio devices for other countries which are included in the ISM band, and proposed some direction and utilization schemes of non-specific frequency in accordance with domestic frequency environment

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.440-443
• /
• 2007

In this paper, microstrip antenna is designed for industrial-scientific-medical(ISM)band of S-Band. We proposed that radiation element of antenna, which is rectangle patch shape. The feeding structure used L-shaped structure. Center frequency and -l0dB bandwidth are investigated by change of length and width in patch plane. And maximum gain, front to back ratio and 3dB beam width is presented by simulation radiation pattern of antenna in frequency ISM Band. The center frequency is 2.45GHz, band width is $2.314{\sim}2.577GHz$ with 263MHz(11%). And the antenna maximum gain is 9.3dBi, 3dB beam width E-plane is $52.5^{\circ}$, H-plane is $64.7^{\circ}$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.636-637
• /
• 2018

The electronic shelf label(ESL) system based on wireless communication can reduce waste of disposable paper, reduce labor force and update real time information. However, the environment in which a large number of ESL modules are installed is exposed to interference from radio frequency(RF) communications in the Industry-Science-Medical(ISM) band. In this paper, we propose an ESL system based on visible light communication to avoid congestion of ESL system using ISM band. In the proposed system, the goods information and ID transmitted from the administrator server are transmitted in the ESL Tag, and the ESL Tag identifies the ID and displays the product information. Experiments show that ESL system using visible light communication is possible.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.101-105
• /
• 2011

This paper calculates protection distance to protect WiBro service from ISM(Industrial Scientific Medical) equipment which is used in the same frequency with WiBro. We analyze with a scenario that WiBro receiver is closed to ISM equipment which has interfering power of CISPR(International Special Committee on Radio Interference) 11 limit. As a result, the protection distance of 14 m was calculated by using MCL (Minimum Coupling Loss) for the worst case. And, the protection distance of 10 m was calculated to meet 5 % interference probability below by using MC(Monte Carlo) for statistic analysis in case of a interferer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.13-18
• /
• 2015

This study presents the structure design of antenna to have the dual band characteristics in a desired frequency band through the structural modification of an antenna structure. For the experiment, a wideband crossed planar monopole antenna was used. The target frequency band was set to ISM 2.45GHz/5.8GHz. To give the properties, an additional antenna element was added to the crossed planar monopole antenna, which is a main body of the antenna. And then structural adjustment parameter was set to change the length(shape) of the antenna. Various simulations were conducted to find the dual band characteristics in the desired frequency band. The simulations brought forth the antenna bandwidth above the normal values for ISM 2.45GHz/5.8GHz. The structural adjustment parameter introduced in this study for structural modification of an antenna can be useful in developing an antenna featured with dual band(multiband) characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.479-488
• /
• 2003

Dual-band microstrip antenna is designed for industrial-scientific-medical(ISM) band of 2.4 GHz and 5.8 GHz using finite-difference time-domain method(FDTD). Cross patch 130 by aperture in the ground plane of microstrip line is proposed as radiation element of antenna which is 2 rectangular patch is overlapped. To design antenna, change of input impedance is examined by length change of aperture and stub. And center frequency and - 10 dB bandwidth are investigated by change of length and width in radiation element. Measured result about reflection loss confirm that agree well with simulation results of FDTD and IE3D. And 3 dB beam width, front to back ratio and maximum gain is presented by measuring radiation pattern of antenna in frequency 2.43 GHz and 5.79 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.4
• /
• pp.402-407
• /
• 2013

In this paper, we consider an interference scenario and interference simulation method of intra-wireless vessel communications using SEAMCAT (Spectrum Engineering Advanced Monte-Carlo Analysis) simulator. The interference between electromagnetic equipment and low power radio apparatus can deteriorate a stability of vessel system and it is necessary to analyze the interference probability between radio devices. The proposed simulation method in the 13.56MHz ISM frequency band shows that the interference effect can be minimized when the distance between the devices is greater than 4.7m and 2.7m in case that the victim receiver (VR) are RFID and remote control(RC) toy, respectively. The proposed interference scenario and simulation method are expected to be helpful in the interference probability analysis and regulation policy in the ISM frequency band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1165-1171
• /
• 2006

In this paper, we designed radio data transceiver to control the machine or equipments for automation in local areas. The designed module can transmit data with 153.6Kbps and uses 424MHz RF carrier to transmit data in the ISM band regulation. It has a processor, CPLD chip of the Altera Company, to control the data in transmitting and receiving. The processor is implemented by programming with VHDL. We will make this module with compact in dimension and higher data rate and apply to RFID technology.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.401-406
• /
• 2005

The GFSK Transceiver of 400MHz ISM band for data communication is designed and fabricated. To reduce the occupied bandwidth of transmitted signal, the GFSK modulation is selected. The measured results of fabricated transceiver show the data rate of 2400bps at 8.5kHz bandwidth, frequency deviation of less than $\pm$3kHz, sensitivity of -111dBm, SNR of 21.58dB. The fabricated transceiver is satisfied with the regulation of radio wave and has the good performance. This transceiver is well suited for data communication of 400MHz ISM band.