• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.691-699
• /
• 2014

In order to increase network lifetime, duty-cycle MAC protocols which can reduce energy consumption caused by idle listening is proposed for WSNs. In common duty-cycle MAC protocols, each sensor node calculates its duty-cycle interval based on the current amount of residual energy. However, in WSNs with the capability of energy harvesting, existing duty-cycle intervals based on the residual energy may cause the sensor nodes which have high energy harvesting rate to suffer unnecessary sleep latency. Therefore, a duty-cycle scheduling scheme which adjust the duty-cycle interval based on both of the residual energy and the energy harvesting rate was proposed in our previous work. However, since this duty-cycle MAC protocol overlooked the performance variation according to the change of duty-cycle interval and adjusted the duty-cycle interval only linearly, the optimal duty-cycle interval could not be obtained to meet application requirements. In this paper, we propose three methods which calculate the duty-cycle interval and analyse their results. Through simulation study, we verify that network lifetime, end-to-end delay and packet delivery ratio can be improved up to 23%, 44% and 31% as compared to the existing linear duty-cycle scheduling method, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.181-192
• /
• 2017

Recently, many researches are carried out for Advanced Driver Assistant Systems(ADAS). Especially, many studies are carried out to analyze the road situation using road images. In order to improve the performance of the road situation analysis, it is necessary to acquire images with appropriate exposure time. In this paper, we design and implement multi exposure smart vehicular camera which provides road traffic information to driver. Proposed device can acquire road traffic information by on-board camera and various sensors. And we propose an auto exposure control algorithm for the road environment to increase accuracy of image recognition. In addition, we also propose the switching ROI method that apply existing ROI techniques to overcome a limited computation power of embedded devices. We developed prototype of multi exposure smart vehicular camera and performed experiments to evaluate proposed auto exposure control algorithm and switching ROI method. The results show that the average accuracy of image recognition increased by 13.45%.

• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.277-284
• /
• 2020

To increase the utilization of the intelligent methodology of smart farm management, estimation modeling techniques are required to assess prior examination of crops and environment changes in realtime. A mandatory environmental factor such as CO₂ is challenging to establish a reliable estimation model in time domain accounted for indoor agricultural facilities where various correlated variables are highly coupled. Thus, this study was conducted to develop an artificial neural network for reducing time complexity by using environmental information distributed in adjacent areas from a time perspective as input and output variables as CO₂. The environmental factors in the smart farm were continuously measured using measuring devices that integrated sensors through experiments. Modeling 1 predicted by the mean data of the experiment period and modeling 2 predicted by the day-to-day data were constructed to predict the correlation of CO₂. Modeling 2 predicted by the previous day's data learning performed better than Modeling 1 predicted by the 60-day average value. Until 30 days, most of them showed a coefficient of determination between 0.70 and 0.88, and Model 2 was about 0.05 higher. However, after 30 days, the modeling coefficients of both models showed low values below 0.50. According to the modeling approach, comparing and analyzing the values of the determinants showed that data from adjacent time zones were relatively high performance at points requiring prediction rather than a fixed neural network model.

• Journal of Digital Contents Society
• /
• v.17 no.3
• /
• pp.119-133
• /
• 2016

This paper is designed to study how public values of viewers impact on the necessity of public service broadcasters and the willingness to payment of TV license fee based on the public-opinion survey regarding raising KBS TV license fee which was submitted to the National Assembly in 2013. To investigate this influence, seven main projects presented by KBS are classified into five public values of public (service) broadcasters such as quality, diversity, universality, social value and global value. The seven key performance tasks were presented by KBS. The study results are summarized as follows. Firstly, the survey group who selected the digital welfare enlargement by free terrestrial multi-channel broadcasting among public values recognized as highest the necessity of public service broadcasting as the most highly. Secondly, regarding the question of raising license fee, 72.4 percent of respondents were in favor of 1,000 won and 43.9 percent of respondents were in favor of 1,500 won. The result of this study shows that public service broadcasting has the possibility of securing the legitimacy of license fee policy when public service broadcasters faithfully carry out the five public values as above.

• The Korea Journal of Herbology
• /
• v.23 no.1
• /
• pp.109-116
• /
• 2008

Objectives : This study was performed to investigate the discriminative criteria of 6 kinds of Achyranthis Radix by HPLC/DAD. Methods : 20-hydroxyecdysone is isolated by silica gel column chromatography ($CHCl_3$:MeOH, 7:1-1:1 v/v) and identified by nuclear magnetic resonance, A high-performance liquid chromatographic method with diode array detection was used to identify 20-hydroxyecdysone in A. japonica. The analysis was performed using $C_{18}$ column with isocratic elution consisted of 18% acetonitrile and 82% water and the detection was carried out by DAD at 254 nm. 6 kinds of Achyranthis Radix from different locations were extracted in MeOH. Each extracts was analyzed by HPLC in same condition as used in analysis of 20-hydroxyecdysone. The identities of each extracts were determined by comparing the retention time and UV spectrum with that of reference compound. Results : 1. A. japonica and A. bidentata showed the similar patterns of HPLC chromatogram and 20-hydroxycedysone was present in both of them because the peaks having the same retention time and UV spectrum as 20-hydroxyecdysone were shown in the HPLC chromatograms of A. japonica and A. bidentata 2. Cyathula officinalis and C. capitata showed the similar patterns of HPLC chromatogram. The peak having the same retention time and UV spectrum as 20-hydroxyecdysone was shown in the HPLC chromatogram of C. capitata but not shown in the HPLC chromatogram of C. officinalis. 3. Two species of medicinal drugs from Sacheon province showed similar patterns of HPLC chromatogram. Achyranthis Radix from Sacheon(wild) did not have 20-hydroxycedysone but Achyranthis Radix from Sacheon(cultivated) showed the peak having the same retention time as 20-hydroxyecdysone but UV spectrum of the peak was different from that of 20-hydroxyecdysone. Conclusions : These results suggested that 20-hydroxyecdysone could be the discriminative criteria for Achyranthis Radix contain 20-hydroxyecdysone though they belong to different genus and species. And the patterns of HPLC chromatogram also could be the discriminative criteria as the different species of Achyranthis Radix belonging to the same genus showed similar patterns of HPLC chromatogram.

• Journal of Aquaculture
• /
• v.16 no.3
• /
• pp.142-150
• /
• 2003

Performance of a biological filter, the rotating biological contactor (RBC), is affected by rotational speed and hydraulic residence time (HRT). A RBC with a disc diameter of 62 cm, total surface area of 48.28 $m^2$, volume of 0.34 ㎥, and submergence ratio of 35.4% was tested for the combinations of five rotational speeds (1, 2, 3, 4 & 5 rpm) and three HRT (0.5, 1.0 & 2.0 hr) to find out the maximum removal efficiencies of total ammonia nitrogen (TAN) and nitrite nitrogen of a simulated recirculating aquaculture system. Ammonia loading rate in the system was 25 g of TAN/ ㎥. day. Removal efficiencies were checked when TAN concentrations in the system stabilized for 3 days in each treatment. The concentration of TAN in the system decreased with increasing rotational speed of the RBC up to 4 rpm in all HRT (P<0.05). At the rotational speed of 5 rpm, the efficiencies decreased in all HRT (P<0.05). When the rotational speeds were 1, 2, 3, 4, and 5 rpm, TAN concentrations in the system were 1.35, 0.94, 0.69, 0.66, and 0.76 mg/L at the 0.5 hr HRT, 2.86, 1.18, 0.96, 0.87, and 1.11 mg/L at the 1.0 hr HRT, and 5.30, 2.44, 1.99, 1.77, and 2.01 mg/L at the 2.0 hr HRT, respectively. The TAN removal efficiencies of the RBC at the rotational speeds of 1, 2, 3, 4, and 5 rpm were 32.9, 49.5, 65.1, 72.9, and 62.9% in 0.5 hr HRT,33.1, 74.1, 87.1, 95.8, and 78.5% in 1.0 hr HRT, and 35.5, 76.7, 89.6, 97.0, and 85.5% in 2.0 hr HRT, respectively. TAN removal efficiency of RBC per pass increased with increasing HRT. However, TAN concentration in the system also increased. The best operating condition among the treatments was obtained at the treatment of 0.5 hr HRT and 4 rpm (P<0.05). The TAN concentration was 0.66 mg/L. Concentrations of nitrite nitrogen (NO$_2$$^{[-10]}$ -N) in the system decreased with increasing rotational speed in all HRT while that in the system increased with increasing HRT in all rotational speeds. The ranges of NO$_2$$^{[-10]}$ -N concentrations at HRT of 0.5, 1.0, and 2.0 hr in the system were 0.26~0.32, 0.31~0.56, and 0.43~l.45 mg/L, respectively. The ranges of daily removal rates of TAN in this system were 20.03~23.0 g TAN/㎥ㆍday and those of nitrite nitrogen were 19.65~30.25 g NO$_2$$^{[-10]}$ -N/㎥ㆍday.

• Journal of the Economic Geographical Society of Korea
• /
• v.23 no.1
• /
• pp.71-81
• /
• 2020

Family companies are the unique industry-academic cooperation-related systems of Korean universities created by universities to promote various forms of industry-academic cooperation with companies. It is important to figure out the current status of family companies in order to understand the achievements of industrial-academic cooperation projects that have been actively pursued since the early 2000s. A lot of studies on industry-academic cooperation have focused mainly on the university's position. On the contrary, this study focuses on understanding the current status of the family company system and the status of industry-academic cooperation. Introduced in 2004, the Family Company System expanded rapidly as it was used as a performance indicator for college financial support projects related to industry-academic cooperation, with 174,425 companies registered as family companies as of 2017. A survey of family companies registered in universities carrying out the LINC+ project shows that companies registered in multiple universities are increasing, with relatively high demand and satisfaction for industry-academic cooperation among companies. Family companies were found to be relatively satisfied in terms of the use of R&D equipment or joint research, while they were relatively less satisfied in terms of workforce training and retraining. While companies have assessed product quality improvements through industry-academic cooperation, they have underestimated the effect of increasing sales and reducing production costs. Further, it was found that it was urgent to expand incentive systems and improve online information services to boost corporate participation in order to enhance the effectiveness of industry-academic cooperation.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.7
• /
• pp.656-664
• /
• 2002

We present a statistical analysis of Korean phonological variations using a Grapheme-to-Phoneme (GPT) system. The GTP system used for experiments generates pronunciation variants by applying rules modeling obligatory and optional phonemic changes and allophonic changes. These rules are derived form morphophonological analysis and government standard pronunciation rules. The GTP system is optimized for continuous speech recognition by generating phonetic transcriptions for training and constructing a pronunciation dictionary for recognition. In this paper, we describe Korean phonological variations by analyzing the statistics of phonemic change rule applications for the 60,000 sentences in the Samsung PBS Speech DB. Our results show that the most frequently happening obligatory phonemic variations are in the order of liaison, tensification, aspirationalization, and nasalization of obstruent, and that the most frequently happening optional phonemic variations are in the order of initial consonant h-deletion, insertion of final consonant with the same place of articulation as the next consonants, and deletion of final consonant with the same place of articulation as the next consonant's, These statistics can be used for improving the performance of speech recognition systems.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.6
• /
• pp.59-76
• /
• 2015

Recent wide spread of embedded devices and technology growth of broadband communication has led to rapid increase in the volume of created and managed data. As a result, data centers have to increase the storage capacity cost-effectively to store the created data. Data deduplication is one way to save the storage space by removing redundant data. This work propose IO extent based deduplication schemes called CORE-Dedup that exploits content-preserving access locality. We acquire IO traces from block device layer in virtual machine host, and compare the deduplication performance of chunking method between the fixed size and IO extent based. At multiple workload of 10 user's compile in virtual machine environment, the result shows that 4 KB fixed size chunking and IO extent based chunking use chunk index 14500 and 1700, respectively. The deduplication rate account for 60.4% and 57.6% on fixed size and IO extent chunking, respectively.

• Journal of Korea Port Economic Association
• /
• v.35 no.4
• /
• pp.169-186
• /
• 2019

This study suggests a development direction by comparing the cargo throughput of the port of Yeosu-Gwangyang during 2007-2015 with that of domestic ports. It derived a concentration index (HHI) of cargo throughput in domestic ports by Yeosu-Gwangyang port docks, shipping companies, and abroad regions. The main results were as follows. First, in terms of total cargo handled, the port of Yeosu-Gwangyang was second only to the port of Busan, and the HHIs for the past nine years were relatively low. Second, the port of Yeosu-Gwangyang ranked first for total import and export cargo throughput, showing relatively stable HHIs from 2007 to 2015. Third, the HHIs of container handling performance by national shipping companies showed stable levels below 1,800. Fourth, there were no regions where cargo volume was noticeably concentrated in the port of Yeosu-Gwangyang, and it showed cargo throughput across various abroad regions. While changes in national shipping companies are expected after the Hanjin Shipping Crisis, there should be no serious concern regarding the dependence of the port of Yeosu-Gwangyang. It is expected to develop further by realizing the full use of all its facilities, diversifying the tenants in the Yeosu-Gwangyang area, and improving the demurrage rate.