• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2090-2092
• /
• 2004

In this paper, the new measurement methodology of characteristics of the vibratory micro gyroscope using Quality factor and the resonant displacement was proposed. Because the Quality factor has a large error under the high Quality factor condition, it is difficult to analyze the characteristics of the vacuum packaged vibratory micro gyroscopes with the Quality factor. We analyzed mechanical characteristics of gyroscope with the value of Quality factor. We described measurement errors of mechanical characteristics of micro gyroscopes. The measured value of Quality factor is 47532 and error range of Quality factor is from -29.8 % to 73.9 %. The value of resonant displacement is 3.4${\mu}m$ and the measurement error is 2.9 %. From the result of Quality factor degradation and resonant displacement degradation, 1698 days and 1503 days were estimated as Time To Failure (TTF), respectively. The range of estimation error of Quality factor degradation and resonant displacement degradation is calculated from 1246 days to 1832 days and from 1456 days to 1537 days, respectively. We can analyze the characteristics of the vibratory gyroscope using the quality factor when the Quality factor is smaller than 10,000. Also we can analyze that using the resonant displacement when the Quality factor is larger than 10,000.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권5호
• /
• pp.632-639
• /
• 2014

Mechanical stress and the vacuum level are the two main factors dominating the quality factor of a resonator operated in the vacuum range 1 mTorr to 10 Torr. This means that if the quality factor of a resonator is very insensitive to the mechanical stress in the vacuum range, it is sensitive to mainly the ambient vacuum level. In this paper, a wafer-level packaged MEMS resonator with a highly vacuum-sensitive quality factor is presented. The proposed device is characterized by a package with out-of-plane symmetry and a suspending structure with only a single anchor. Out-of-plane symmetry helps prevent deformation of the packaged device due to thermal mismatch, and a single-clamped structure facilitates constraint-free displacement. As a result, the proposed device is very insensitive to mechanical stress and is sensitive to mainly the ambient vacuum level. The average quality factors of the devices packaged under pressures of 50, 100, and 200 mTorr were 4987, 3415, and 2127, respectively. The results demonstrated the high controllability of the quality factor by vacuum adjustment. The mechanical robustness of the quality factor was confirmed by comparing the quality factors before and after high-temperature storage. Furthermore, through more than 50 days of monitoring, the stability of the quality factor was also certified.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.64-70
• /
• 2010

This paper presents how to decide on tuning factor(${\delta}$) and quality factor(Q) values in design of single-tuned passive harmonic filters. Tuning factor(${\delta}$) and quality factor(Q) values have to consider before decision on circuit parameters of passive filters. A Study on these two value has not been scarcely performed and only experienced values has been used in passive harmonic filter design by far. As a experienced value, in cases of 5th and 7th filter, tuning factor(${\delta}$) is about 0.94 and 0.96 respectively and quality factor(Q) is, in all cases of, 50. If Single-tuned passive harmonic filter will be off-tuned, performance of filter will be decreased steeply and occur to parallel resonance between system reactance and filter capacitance. Therefore During the operation, In order not to off-tuning, Filter must be tuned at former order than actual tuning order. This is the same that total impedance of filter must have a reactive impedance. In this paper, Tuning factor(${\delta}$) is decided via example of real system and using the bode-plot and then performance of filters confirmed by filter current absorbtion rate. And Quality factor(Q) decided using the bode plot in example system and then performance of filters confirmed by filter current absorbtion rate also, which makes a calculated filter parameters to satisfy IEEE-519 distortion limits. Finally, Performance of the designed passive harmonic filter using the tuning factor(${\delta}$) and quality factor(Q) values, decided in this paper is verified by experiment and shows that 5th, 7th, 9th, 11th and 13th current harmonic distortions are decreased within IEEE-519 distortion limits, respectively.

• 환경위생공학
• /
• 제18권4호
• /
• pp.6-14
• /
• 2003

A spring water quality was depend on the aquifer soil status. However, water quality was rapidly contaminated by artificial affects. In the contaminate components, the heavy metals were significantly important because the heavy metals influence the plants and the animals. But, it is difficult to find out how the heavy metal can affect in the water quality. According to the group analysis and the factor analysis, water quality management was advanced. The experimental area was divided into three region and six factor. The six factor could not define the overall water quality, however this method were one of the useful methods.

• 한국도서관정보학회지
• /
• 제47권2호
• /
• pp.287-304
• /
• 2016

본 연구는 교수의 연구업적을 보다 다면적으로 측정하기 위한 합리적 방법을 고안하기 위하여 새로운 논문계량지표인 Quality Factor를 개발하였다. Quality Factor는 총 논문수, 피인용수, h-index, Impact Factor를 이용하여 수치를 도출한다. 새로 개발한 지표인 Quality Factor와 다양한 지표(논문 수, Impact Factor, 피인용수, h-index, g-index)간의 관계를 분석하기 위하여, 본 연구는 국내 문헌정보학과 교수 189명의 14년간(2001-2014)의 학술논문데이터를 바탕으로 그들의 지표별(논문 수, Impact Factor, 피인용수) 순위를 산출하고 지표들 간에 스피어만 순위상관관계를 도출하였다. 그 결과, Quality Factor는 전체적으로 피인용 수의 영향을 주로 받는 지표(피인용수, h-index, g-index)와 유사한 상관관계를 보였으나, 산점도에서 Quality Factor가 타 지표에 비하여 분산된 분포를 나타내면서 개별식별성이 높은 것으로 드러났으며 군집 분할 분석에서도 타 지표들과 상이한 상관관계를 보여주었다.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.293-301
• /
• 2013

The purpose of this study is to introduce the limit of previously used six sigma quality process evaluation metrics, $Z_{st}$ and $P_{pk}$, and a solution to overcome this drawback by using a metric based on performance evaluation of Z-factor quality innovation. Case analysis on projects from national six sigma contest from 2011 to 2012 is performed and literature review on new drug development HTS (High Throughput Screening) is used to propose innovative performance evaluation metrics. This research shows that experimental study on six sigma evaluation metric, $Z_{st}$ and $P_{pk}$, have no significance difference between industrial type (Manufacturing, Semi-Public Institute, Public Institute) and CTQ type (Product Technology Type CTQ, Process Technology Type CTQ). Following discovery characterize this quality improvement as fixed target type project. As newly developed moving target type of quality innovation performance metric Z-Factor is used for evaluating experimental study, hypothetical analysis suggests that $Z_{st}$ and $P_{pk}$ share different relationship or even show reciprocal relationship. Constraints of the study are relatively small sample size of only 37 projects from past 2 years and conflict on having interview and communication with six sigma quality practitioner for qualitative experimental study. Both moving target type six sigma innovation project and fixed target type improvement project or quality circle enables efficient ways for a better understanding and quality practitioner use by applying quality innovation performance metric. Downside of fixed target type quality performance evaluation metric, $Z_{st}$ and $P_{pk}$, is presented through experimental study. In contrast, advantage of this study is that high throughput requiring product technology, process technology and quantum leap typed innovation effect is evaluated based on precision and accuracy and Z-Factor that enables relative comparison between enterprises is proposed and implemented.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2009년도 추계학술대회
• /
• pp.317-323
• /
• 2009

In this paper, we propose new methods which is to determine level of noise factor. Even Taguchi give level of noise factor which is best(or maximum) and worst(or minimum) condition, we give level of noise factor which is representative value by observing noise factor frequency. Sometimes level of noise factor is given one, two and three. We know this method is more fit in real fields.

• 품질경영학회지
• /
• 제37권4호
• /
• pp.10-15
• /
• 2009

In this paper, we propose new methods which is to determine level of noise factor. Even Taguchi give level of noise factor which is best(or maximum) and worst(or minimum) condition, we give level of noise factor which is representative value by observing noise factor frequency. Sometimes level of noise factor is given one, two and three. We know this method is more fit in real fields.

• 융합보안논문지
• /
• 제14권4호
• /
• pp.55-60
• /
• 2014

본 연구에서 제안하는 암호화 모듈 품질평가 체계는 ISO/IEC 9000 품질체계를 참조하여 Quality, Quality Factor, Quality Subfactor, Metric로 계층화된다. 암호화 알고리즘 실무적용 프로세스는 암호화 알고리즘 장단점 진단을 기초로 하여 암호화자산 평가, 알고리즘선택 포인트 분석, 품질 항목(quality factor) 도출, 제약조건도출, 암호모듈 품질평가체계 설계 등 5개단계로 설정한다. 이 5개 단계는 현장중심의 암호화 작업사례를 진단하여 업무에서 가장 필수적으로 수행되어야 할 작업순서를 도출한 것 이다. 2-Factor간 연계지표는 암호화 모듈의 품질항목(quality factor)을 발굴하고 이 품질 항목을 확보하는 환경인 암호화 작업의 제약조건 두가지 영역이다. 본 연구는 암호화 모듈 실무현장 적용체계를 하나의 표준화 모델로 제시한다. 우리는 정보기술 환경의 급속한 변화에 부응하여 암호화 알고리즘 개발과 현장 적용 모델을 다양하게 개발하므로서 암호화의 효율을 기대할 수 있을 것이다.

• 한국컴퓨터정보학회논문지
• /
• 제12권5호
• /
• pp.215-223
• /
• 2007

온라인 쇼핑몰에 대한 관심이 높아지면서 다양한 연구가 진행되어 왔다. 그러나 대부분의 연구들은 인터넷의 특성을 고려하지 않은 채 오프라인 시장의 서비스품질 측정 도구를 그대로 적용하고 있다. 이에 본 연구에서는 기존 상거래에서처럼 환경적인 요소도 고객만족에 영향을 미치는 요인으로 고려하여 시스템품질로 규정하고, 서비스품질과 더불어 고객만족과의 관계를 파악하는 것이 중요하다고 보았다. 즉, 시스템품질과 서비스품질 중 어느 품질 요인이 고객만족에 더 많은 영향을 미치는지를 살펴보고, 시스템품질 요인과 서비스품질 요인과 고객만족 요인인 타인에게 적극적으로 쇼핑몰을 추천하는 애호도와 전환성과 어떤 관계가 있는지를 살펴본 후 이에 따라 고령친화용품을 중심으로 다양한 고객의 욕구를 충족시키는데 필요한 품질전략을 제시하고자 하였다.