• YAKHAK HOEJI
• /
• v.11 no.1_2
• /
• pp.4-6
• /
• 1967

Cation exchange resin particles amberlite IRC-50 were used as a medium for a identific test of alkaloids with dragendorff reagent. The procedures were as follows; A few particles of amberlite IRC-50 were added to the small portion of sample solutions on a spot plate or in a test tube. After 20 minutes-an hour, a drop of dragendorff reagent were added to particles of resin that were adsorbed. When alkaloid was present, the original color of the resin particles changed instantly to red or reddish orange depending on the amount and kind of alkaloid, while in the absence of alkaloid the original color of the resin particles changed light yellow. These methods were more sensitive than the ordinary spot test or paper spot test for alkaloid. The limits of identifications of nine alkaloids were tested by these methods and compared with the paper spot test method.

• Tribology and Lubricants
• /
• v.39 no.4
• /
• pp.123-132
• /
• 2023

In this study, the expansion, stress, and operating clearance of bearing elements during operation are observed using the inner/outer ring temperature test data of a 3.0×10⁶ DN-class roller bearing. The operating clearance characteristics of inner-/outer-ring cooling (IORC) bearings are compared to those of inner-ring cooling (IRC) bearings. For IRC bearings, the thermal expansion of the outer ring is the most important factor in clearance variation. As a result, the operating clearance is less than the initial clearance of 61 ㎛, and the operating clearance decreases to 0.5 ㎛ at 25,500 rpm. Conversely, the temperature of the outer ring of IORC bearings is lower than that of IRC bearings, so the operating clearance is kept smaller. When the coolant flow rate to the outer ring is approximately 1.5 to 2.0 L/min, the temperature difference between the inner and outer rings is minimized and the operating clearance is maintained at a significantly lower level than IRC bearings. Small operating clearances are expected to be effective in reducing cage slip and skid damage in roller bearings. The results and analysis procedures of this study can be utilized to design of bearing clearance, lubricant flow rate, and assembled interference in the early design stage of aerospace roller bearings.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.6
• /
• pp.39-46
• /
• 2004

One of the significant issues in cluster analysis is to identify a proper number of clusters hidden under given data. In this paper we propose a novel approach to systematically determine the number of clusters based on Input Representation Coverage (IRC), which is newly defined as a quantified value of how well original input data in Gaussian feature space can be captured with a certain number of clusters. Furthermore, its usability and applicability is also investigated via experiments with synthetic data. Our experiment results show that the proposed approach is quite useful in approximately finding the real number of clusters implicitly contained in the data.

• The Bulletin of The Korean Astronomical Society
• /
• v.11
• /
• pp.6.1-6.1
• /
• 1986

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.93-101
• /
• 2018

Various leading indicators of safety culture have been advocated for proactive actions as lagging indicators have limitations in reflecting the attitudes and behaviors due to their reactivity and low sensitivity. This study proposes a model of incident-reporting culture (IRC) and determines the influence of the components on incident-reporting rate (IRR) in order to develop proactive indicators of safety culture. A questionnaire survey was administered to 614 workers at a chemical company in Korea, and the internal psychological aspects were explored by using perceptions, attitude, and backgrounds. The relationship between these factors and IRR was quantitatively confirmed. The workers are more reluctant to report injury than property damage, the perception of severity is the most influencing factor, and most property damages are reported regardless of worker's willingness. These features should be prioritized when improving IRC, and the criteria of IRC need to be aligned with safety culture.

• Korean Journal of Poultry Science
• /
• v.16 no.3
• /
• pp.157-167
• /
• 1989

Pretreatment of egg white and ion exchange resins was attempted to separate lysozyme from egg white efficiently. Apparent viscosity of egg white could be decreased to 3cp by homogenization for 30 minutes at 2, 000rpm and ultrasonication for 45 minutes. The result of testing adsorption capacity of lysozyme was as follows； CM-Sephadex C-25 ＞Duolite C464＞Amberlite C-50＞Dowex MSC-1＞Amberlite IRC-50＞Amberlite IRC-84. Although CM-Sephadex C-25 showed highest adsorption capacity of lysozyme, egg white could not eluted easily. Duolite Cf64 was selected based on relatively high lysozyme adsorption and good egg white eluting property for separation of egg white lysozyme. Na$^{＋}$ form of Duolite C-464 was most effective on adsorption of Iysozyme. To separate lysozyme from egg white efficiently rinse buffer and eluting solution were selected 0.1M sodium phosphate buffer at pH 6.5 and 10% ammonium sulfate respectively. After separating lysozyme from egg white, foaming power of egg white was decreased to 85.3%. Color of egg white gel was not changed while hardness of egg white gel was decreased by 30% after separating lysozyme. However, elasticity of egg white gel was increased by 13% in lysozyme-separated egg white.

• Publications of The Korean Astronomical Society
• /
• v.27 no.4
• /
• pp.165-169
• /
• 2012

We observed an area of 10 $deg^2$ of the Large Magellanic Cloud using the Infrared Camera (IRC) onboard AKARI. The observations were carried out using five imaging filters (3, 7, 11, 15, and $24{\mu}m$) and the prism disperser ($2-5{\mu}m$, ${\lambda}/{\Delta}{\lambda}{\sim}20$) equipped in the IRC. This paper presents an outline of the survey project and also describes very briefly the newly compiled near- to mid-infrared point source catalog. The $10{\sigma}$ limiting magnitudes are 17.9, 13.8, 12.4, 9.9, and 8.6 mag at 3.2, 7, 11, 15 and $24{\mu}m$, respectively. The photometric accuracy is estimated to be about 0.1 mag at $3.2{\mu}m$ and 0.06 - 0.07 mag in the other bands. The position accuracy is 0.3" at 3.2, 7 and $11{\mu}m$ and 1.0" at 15 and $24{\mu}m$. The sensitivities at 3.2, 7, and $24{\mu}m$ are roughly comparable to those of the Spitzer SAGE LMC point source catalog, while the AKARI catalog provides the data at 11 and $15{\mu}m$, covering the near- to mid-infrared spectral range continuously.

• Microbiology and Biotechnology Letters
• /
• v.10 no.4
• /
• pp.275-281
• /
• 1982

One strain of Streptomyces sp. (AS-707) isolated from soil was found to produce a biologically active substance that showed a strong inhibitory activity against proteolytic enzymes viz. trypsin, papain, $\alpha$-chymotrypsin, Azotobacter protease, and Bacillus pretense. The substance was separated from culture filtrate by ion exchange column chromatography using Amberlite IRC-50 and CM-cellulose column chromatography. It was found that the recovery yield was 26% as activity basis. The substance was stable in wide pH range from 2.0 to 12.0 at 37$^{\circ}C$, but it was unstable in alkaline pH values at 6$0^{\circ}C$. The activity was thermostable to give 90% activity compared to the intact sample when it was treated at pH5.6 at 10$0^{\circ}C$ for 2 hours.

• Journal of the Korean Chemical Society
• /
• v.43 no.1
• /
• pp.36-41
• /
• 1999

The adsorptive stripping voltammetric determination method of trace germanium (IV) using mercaptoacetic acid as a ligand was studied. Optimal conditions were found to be 0.25 M NaCl solution (pH 6.0) containing mercaptoacetic acid concentration of $5.0{\times}10^{-6}M$. The peak potential appeared at - 1.402 V vs. Ag/AgCl. Effects of sodium chloride concentration, mercaptoacetic acid concentration, and accumulation time for the complex of Ge(IV)-Mercaptoacetic acid on the peak current were studied. Amberlite IRC-718 chelating resin was applied to the separation of Ge(IV) from other metal ions.

• Structural Monitoring and Maintenance
• /
• v.9 no.1
• /
• pp.43-57
• /
• 2022

One of the instances which demand structural engineer's greatest attention and upgradation is the changing live load requirement in bridge design code. The challenge increases in developing countries as the pace of infrastructural growth is being catered by the respective country codes with bigger and heavier vehicles to be considered in the design. This paper presents the case study of India where Indian Roads Congress (IRC) codes in its revised version from 2014 to 2017 introduced massive Special vehicle (SV) around 40 m long and weighing 3850 kN to be considered in the design of road bridges. The code does not specify the minimum distance between successive special vehicles unlike other loading classes and hence the consequences of it form the motivation for this study. The effect of SV in comparison with Class 70R, Class AA, Class A, and Class B loading is studied based on the maximum bending moment with moving load applied in Autodesk Robot Structural Analysis. The spans considered in the analysis varied from 10 m to 1991 m corresponding to the span of Akashi Kaikyo Bridge (longest bridge span in the world). A total of 182 analyses for 7 types of vehicles (class B, class A, class 70R tracked, class 70R wheeled, class AA tracked, AA wheeled, and Special vehicle) on 26 different span lengths is carried out. The span corresponding to other vehicles which would equal the bending moment of a single SV is presented along with a comparison relative to Standard Uniformly Distributed Load. Further, the results are presented by introducing a new parameter named Intensity Factor which is proven to relate the effect of axle spacing of vehicle on the normalized bending moment developed.