• YAKHAK HOEJI
• /
• v.36 no.2
• /
• pp.159-166
• /
• 1992

A neoglycolipid, N-stearyl lactobionamide(N-SLBA) was synthesized and the incorporation of the neoglycolipid into liposomes was achieved in order to prepare neo-galactosylated liposome as potential drug carrier for active targeting to galactose receptor existing cell and tissue. N-SLBA was synthesized by the covalent linkage between carboxyl group of lactobionic acid and amino group of stearylamine(SA). The yield of N-SLBA was about 52.3%. It was identified with $1650\;cm^{-1}$ in IR chart, 7.5 ppm in NMR spectra, $61^{\circ}C$ endothermic peak in DSC heating curve. Surface-modified large unilamellar vesicle with galactose(N-SLBA-LUV) could be prepared with N-SLBA by reverse evaporation method. N-SLBA-LUV was identified by TEM and measuring of membrane function. The maximum amount of N-SLBA incorporated into liposome is up to about 15 mol%. Compared with control liposome (SA-LUV), N-SLBA-LUV showed lower encapsulation efficiency of MTX. It might due to the loss of positive surface charge of stearylamine. N-SLBA-LUV was similar to SA-LUV in aspect of osmotic behavior. N-SLBA-LUV prepared with N-SLBA would be expected to be a good carrier for active targeting to galactose receptor existing cell and tissue.

• Journal of the Korean Chemical Society
• /
• v.39 no.11
• /
• pp.837-841
• /
• 1995

Thermodynamic parameters for the hydrogen bonding between thiopropionamide(TPA) and proton donors such as triethylphosphine oxide(TEPO), triphenylphosphine oxide(TPPO), trimethylphosphate(TMP), and tributyl phosphate(TBP) in dilute carbon tetrachloride solution have been measured by near-IR spectroscopy. The νa + amide Ⅱ combination band of TPA has been resolved into two Lorentzian-Gaussian product components which have been identified with monomeric TPA and 1 : 1 hydrogen bonded complex. The equilibrium constants and thermodynamic parameters for the formation of 1 : 1 hydrogen bonded complex have been obtained by the analysis of concentration and temperature dependent spectra. The standard enthalpies for the 1 : 1 hydrogen bonded complex formation of TPA with TEPO, TPPO, TMP, and TBP in CCl4 have been found to be - 21.4, - 16.8, - 12.8, and - 12.9 kJ/mol, respectively. The results are explained by the inductive and steric effects of substituents.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2207-2212
• /
• 2012

Dimethylaluminum isopropoxide (DMAI, $(CH_3)_2AlO^iPr$) as a single precursor, which contains one aluminum and one oxygen atom, has been adopted to deposit non-stoichiometric aluminum oxide ($AlO_x$) films by low pressure metal organic chemical vapor deposition without an additional oxygen source. The atomic concentration of Al and O in the deposited $AlO_x$ film was measured to be Al:O = ~1:1.1 and any serious interfacial oxide layer between the film and Si substrate was not observed. Gaseous by-products monitored by quadruple mass spectrometry show that ${\beta}$-hydrogen elimination mechanism is mainly contributed to the $AlO_x$ CVD process of DMAI precursor. The current-voltage characteristics of the $AlO_x$ film in Au/$AlO_x$/Ir metalinsulator-metal (MIM) capacitor structure show high ON/OFF ratio larger than ${\sim}10^6$ with SET and RESET voltages of 2.7 and 0.8 V, respectively. Impedance spectra indicate that the switching and memory phenomena are based on the bulk-based origins, presumably the formation and rupture of filaments.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2595-2602
• /
• 2009

Hexamer cluster of N,N-dimethylformamide(DMF) based on the crystal structure was investigated for the equilibrium structure, the stabilization energies, and the vibrational properties in the density functional force field. The geometry (point group $C_i$) of fully optimized hexamer clustered DMF shows quite close similarity to the crystal structure weakly intermolecular hydrogen bonded each other. Stretching force constants for intermolecular hydrogen bonded methyl and formyl hydrogen atoms with nearby oxygen atom, methyl C–H${\cdots}$O and formyl C–H${\cdots}$O, were obtained in 0.055 $\sim$ 0.11 and $\sim$ 0.081 mdyn/$\AA$, respectively. In-plane bending force constants for hydrogen bonded methyl hydrogen atoms were in 0.25 $\sim$ 0.33, and for formyl hydrogen $\sim$ 0.55 mdynÅ. Torsion force constants through hydrogen bonding for methyl hydrogen atoms were in 0.038 $\sim$ 0.089, and for formyl hydrogen atom $\sim$ 0.095 mdynÅ. Calculated Raman and infrared spectral features of single and hexamer cluster represent well the experimental spectra of DMF obtained in the liquid state. Noncoincidence between IR and Raman frequency positions of stretching C=O, formyl C–H and other several modes was interpreted in terms of the intermolecular vibrational coupling in the condensed phase.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1825-1831
• /
• 2006

The influence of solvent viscosity on conformational dynamics of the heme-pocket, a small vacant site near the binding site of myoglobin (Mb) and hemoglobin (Hb), and playing a functionally important role by serving as a station in ligand binding and escape, was studied by probing time-resolved vibrational spectra of CO photodissociated from MbCO and HbCO in $D_2O$, 75 wt% glycerol/$D_2O$, and trehalose at 283 K. Two absorption bands ($B_1$ and $B_2$) of the sample in viscous solvents, arising from CO in the heme pocket, are very similar to those in $D_2O$. Two bands in Mb and Hb under all three solvents exhibit very similar nonexponential spectral evolution ($B_1$ band; blue shifting and broadening, $B_2$ band; narrowing with a negligible shifting), suggesting that in the present experimental time window of 100 ps, the extents of the spectral shift and narrowing is much influenced neither by the viscosity of solvent nor by the quaternary contact of Hb. Spectral evolution can be described by a biexponential function with a fast universal time constant of 0.52 ps and a slow time constant ranging from 13 to 32 ps. For both proteins in all three solvents majority of spectral evolution occurs with the fast universal time constant. The magnitude of the slow rate in the spectral shift of B1 band decreases with increasing solvent viscosity, indicating that it is influenced by global conformational change which is retarded in viscous solvent, thereby serve as a reporter of global conformational change of heme proteins after deligation.

• YAKHAK HOEJI
• /
• v.31 no.5
• /
• pp.330-337
• /
• 1987

The weak UV absorbing ephedrine alkaloids such as ephedrine, pseudoephedrine, methylephedrine and norephedrine could be analyzed by charge-transfer spectrophotometric method. The results obtained are summarized as follows: (1) It was possible to determine a weak UV absorbing ephedrine alkaloids using the intense charge-transfer UV bands in chloroform. (2) This method was suitable for the spectrophotometric determination of ephedrine alkaloids in mixed pharmaceutical preparation. (3) Linear relationship was found between absorbance and concentration in the range of 1.0$\times$$10^{-5}M$~5$\times$$10^{-5}M$ of ephedrine ($\varepsilon$= 2.72$\times$$10^{4}LM^{-1}cm^{-1}$ and pseudoephedrine ($\varepsilon$=2.84$\times$$10^{4]LM^{-1}cm^{-1}$), 1.0$\times$$10^{-5}M$~5$\times$$10^{-5}$M of methylephdrine ($\varepsilon$=1.68$\times$$10^{4}LM^{-1}cm^{-1}$) and 1/3$\times$$10^{-4}M$~4/3$\times$$10^{-4}M$ of norephedrine ($\varepsilon$=0.74$\times$$10^{4}LM^{-1}cm^{-1}$. (4) CT- complex of ephedrine, pseudoephedrine and methylephedrine has absorption maxima at 293nm and norephedrine have absorption maximum at 253nm. (5) CT-complexes were formed in a 1:1 ratio between ephedrine alkaloids and iodine in chloroform. (6) By UV, IR, and $^1H$-NMR spectra, it could be inferred that CT-complexes were formed by interaction between the basic nitrogen of ephedrine alkaloids as electron (n) donor and iodine as electron ($\sigma$) acceptor.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.1
• /
• pp.14-21
• /
• 2003

Thin films of ZrO$_2$ and TiO$_2$ were deposited on Si(100) substrates using RF magnetron sputtering technique. To study an influence of the sputtering parameters, systematic experiments were carried out in this work. XRD data show that the $ZrO_2$ films were mainly grown in the [111] orientation at the annealing temperature between 800 and $1000^{\circ}C$ while the crystal growth direction was changed to be [012] at above $1000^{\circ}C$. FT-IR spectra show that the oxygen stretching peaks become strong due to $SiO_2$ layer formation between film layers and silicon surface after annealing, and proved that a diffusion caused by either oxygen atoms of $ZrO_2$ layers or air into the interface during annealing. Different crystal growth directions were observed with the various deposition parameters such as annealing temperature, RF power magnitude, and added $O_2$ amounts. The growth rate of $TiO_2$ thin films was increased with RF power magnitude up to 150 watt, and was then decreased due to a sputtering effect. The maximum growth rate observed at 150 watt was 1500 nm/hr. Highly oriented, crack-free, stoichiometric polycrystalline $TiO_2$<110> thin film with Rutile phase was obtained after annealing at $1000^{\circ}C$ for 1 hour.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.3
• /
• pp.194-200
• /
• 2020

Perylene bisimide derivatives are developed for red organic phosphor because of their advantages, such as excellent luminous efficiency and high thermal stability. Despite these advantages, they have poor solubility characteristics in organic solvents and short emission wavelength as red organic phosphor for hybrid light-emitting diodes (LEDs). In this study, we prepared terrylene bisimide using a coupling reaction and swallow-tail imide group, which has excellent solubility. The structures and properties of swallow-tail terrylene bisimide (9C) were analyzed using ¹H-nuclear magnetic resonance (¹H-NMR), Fourier-transform infrared (FT-IR), UV/Vis spectroscopy, and thermal gravimetric analysis (TGA). The maximum absorption wavelength of (9C) in the UV/Vis spectrum was 647 nm, and the maximum emission wavelength was 676 nm. In the TGA, (9C) demonstrated good thermal stability with less than 5 wt% weight loss up to 415℃. In the solubility test, (9C) has a good solubility of more than 5 wt% in chloroform and dichloromethane. When the compounds (9C) were mixed with PMMA (polymethly methacrylate), the films showed peaks at 680 nm in the PL spectra. The results verify the suitability of (9C) as a red organic phosphor for hybrid LEDs.

• Journal of Pharmaceutical Investigation
• /
• v.6 no.1
• /
• pp.26-32
• /
• 1976

Dicalcium phosphate dihydrate (DCPD) is the most widely-used dentifrice abrasive in non-therapeutic tooth-paste requiring, low abrasive level, high stability and excellent compatibility with other formulation ingredients. One of the difficulties encountered in the use of this material in tooth-paste is that unless storage of the product is maintained at a relative low temperature there is a distinct tendency to lose water of crystallization. Another difficulty which has been encountered is that there is a tendency for the product to become lumpy. Various means have been proposed for increasing the stability and overcoming the lumping tendency, most of which means comprise the addition of stabilizing agent. But there is not any report about the relationships between the mechanism of dehydration, physical properties, structure and manufacturing condition. In this experiment, DCPD were manufactured by methods of Moss' patent, its two varied and J.P.VIII, these were studied by means of stability test, IR spectra, and DTA. According to the manufacturing conditions, DCPD has different physical properties and structures, i. e., monoclinic system of low drying temperature, triclinic system of high drying temperature. Dehydration of DCPD may be supposed one step debydration at about $100^{\circ}$ and it finaly converts to ${\gamma}-pyrophosphate$ at about $465^{\circ}$ and if the drying temperature is high it becomes DCP anhydrous. DCPD made by Moss' patent is thought of the best polishing agent of tooth-paste.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.59-63
• /
• 2005

Kinetic study of a reaction between poly(caprolactone diol) and aliphatic isocyanate was investigated by FTIR spectroscopy. The reaction rate was obtained from analyzing the absorbance change of NCO peak (2265 $cm^{-1}$) in series IR spectra. In the results, the overall reaction between PCL and isocyanate conformed to the simple second-order law, and the rate constant increases with increasing reaction temperature. The activation energies obtained from the evaluation of kinetic data were 25.4∼30.9 kJ/mol for hexamethylene diisocyanate and 16.8∼22.1 kJ/mol for cyclohexylmethane diisocyanate, respectively.