분극처리 없이 제작한 lanthanum-modified lead titanate (PLT) 박막의 초전특성에 대한 변조 주파수 의존성을 dynamic method를 이용하여 조사하였다. La이 10mo1% 첨가된 Pb/sub l-x/La/sub x/Ti/sub l-x/4/O₃ (h=0.1) (PLT(10)) 박막을 Pt/TiO/sub x//SiO₂/Si 기판위에 acetate 계 precursor 을 이용한 sol-gel 법으로 제작하였다. 제작된 PLT(10) 박막은 비교적 우수한 유전특성을 보였다. 초전계수 (p) 는 주파수 의존성이 없이 6.6×10/sup -9/ C/㎠·K 을 나타내었다. 이를 이용하여 구한 전압감도와 비검출능을 위한 재료평가지수는 각각 1.03×10/sup -11/ C·㎝/J 과 1.46×10/sup -9/C·㎝/J 로 나타났다. 제작된 PLT(10) 박막 초전형 적외선 센서는 주파수 8Hz 에서 5.15v/w 의 전압감도 (Rv)를 가지며, 잡음등가전력 (NEP) 과 비검출능 (D/sup */) 은 동일한 주파수 100Hz 에서 각각 9.93×10/sup -8/W/Hz/sup 1/2/와 1.81×10/sup 6/cm·Hz/sup 1/2//W 의 최소값과 최대값을 나타내었다. 이와 같은 특성들은 PLT(10) 박막이 초전형 적외선 센서의 감지물질로 매우 적합함을 나타낸 것이다.
Carbon black(이하 CB로 약함) 표면에 존재하는 각종 작용기(-OH, OC,<-COOH)를 n-butyl lithium을 반응활성화제로 활성화시킨 후 아크릴레이트 및 메타크릴레이르 단량체들을 음이온 그라프트 중합하여 CB-그라프트 생성물을 얻었다. 이 CB-그라프트 생성물을 비용매를 이용한 침전법과 원심분리기를 사용하여 호모폴리머를 분리시켜 반응시간과 온도에 따른 그라프트 효율 등을 구한 결과, CB-polyacrylates의 경우 그라프트율이 20~30% 정도로 낮았지만 CB-polymethacrylate의 경우 150~200% 정도의 매우 높은 그라프트율의 CB- grafted polymer를 얻을 수 있었다. 또한, 각 반응온도에서 CB와 단량체들의 음이온 중합은 대체로 1~2시간 정도에서 평형상태를 이루었으며, 온도가 높아짐에 따라 전환율과 그라프트율은 약간의 증가를 보였다. 콜로이드 분산성 시험을 한 결과 열건조 전에는 각 호모폴리머의 양용매 중에서 매우 안정한 분산성을 나타냈으며, 열건조 후에도 CB-polymethacrylate의 경우에는 대부분의 polymethacrylate 양용매에 대해 매우 양호한 안정성을 보였다. CB 표면에서의 그라프트 중합체의 확인은 적외선 스펙트럼에 의해 행하였다. Four-probe 방법에 의한 CB-grafted polymer의 저항값 측정에서는 그라프트율이 높을수록 저항값이 증가함을 알 수 있었다.
본 논문은 무선 전력 전송에 관한 이론을 토대로 송신부와 수신부의 두 개의 평면 코일 사이의 자기 유도 원리의 다양한 조건 변화에 따른 무 접촉 무선 전력 전송에 관한 연구이다. 실험은 무 접촉 방식으로 전력을 전송 할 수 있는 송신부인 1차 측 코일과 수신부인 2차 측 코일 및 하프브리지 직렬 공진 컨버터를 적용한 무선 전원 장치의 송신부 회로와 수신부회로의 출력 전압 및 전원을 계산할 수 있는 환경을 마련해 주었다. 송신부의 유도 결합 공진 컨버터의 주 전원은 태양광 전지 모듈과 대체 광원으로서 인공 광원(할로겐 램프)을 이용하여 전기 에너지로 변환 시켜 사용하였으며 태양광 발전으로부터 공급받은 24 V 전원을 무선 전력 전송 장치를 위한 입력 전원으로 사용하였다. 실험 결과, 전달 받은 전력은 수신부 회로에서 조명을 밝히거나 배터리를 충전하는데 사용된다. 그리고 송신부의 출력 측에서 측정을 통해 수신부의 입력 전력과 비교하여 무선 전력 전송 효율은 약 70~89%로 나타났다. 또한 이 논문을 위해서, 무선 전력 전송 시 이물질이 간섭하였을 때, ID 검증 방식과 전압의 위상차 비교 방법을 통해 효율성 실험을 하였다.
New approaches for detecting, preventing and remedying environmental damage are important for protection of the environment. Procedures must be developed and implemented to reduce the amount of waste produced in chemical processes, to detect the presence and/or concentration of contaminants and decontaminate fouled environments. Contamination can be classified into three general types: airborne, surface and structural. The most dangerous type is airborne contamination, because of the opportunity for inhalation and ingestion. The second most dangerous type is surface contamination. Surface contamination can be transferred to workers by casual contact and if disturbed can easily be made airborne. The decontamination of the surface in the nuclear facilities has been widely studied with particular emphasis on small and large surfaces. The amount of wastes being produced during decommissioning of nuclear facilities is much higher than the total wastes cumulated during operation. And, the process of decommissioning has a strong possibility of personal's exposure and emission to environment of the radioactive contaminants, requiring through monitoring and estimation of radiation and radioactivity. So, it is important to monitor the radioactive contamination level of the nuclear facilities for the determination of the decontamination method, the establishment of the decommissioning planning, and the worker's safety. But it is very difficult to measure the surface contamination of the floor and wall in the highly contaminated facilities. In this study, the poly(styrene-ethyl acrylate) [poly(St-EA)] core-shell composite polymer for measurement of the radioactive contamination was synthesized by the method of emulsion polymerization. The morphology of the poly(St-EA) composite emulsion particle was core-shell structure, with polystyrene (PS)as the core and poly(ethyl acrylate) (PEA) as the shell. Core-shell polymers of styrene (St)/ethyl acrylate (EA) pair were prepared by sequential emulsion polymerization in the presence of sodium dodecyl sulfate (SOS) as an emulsifier using ammonium persulfate (APS) as an initiator. The polymer was made by impregnating organic scintillators, 2,5-diphenyloxazole (PPO) and 1,4-bis[5-phenyl-2-oxazol]benzene (POPOP). Related tests and analysis confirmed the success in synthesis of composite polymer. The products are characterized by IT-IR spectroscopy, TGA that were used, respectively, to show the structure, the thermal stability of the prepared polymer. Two-phase particles with a core-shell structure were obtained in experiments where the estimated glass transition temperature and the morphologies of emulsion particles. Radiation pollution level the detection about under using examined the beta rays. The morphology of the poly(St-EA) composite polymer synthesized by the method of emulsion polymerization was a core-shell structure, as shown in Fig. 1. Core-shell materials consist of a core structural domain covered by a shell domain. Clearly, the entire surface of PS core was covered by PEA. The inner region was a PS core and the outer region was a PEA shell. The particle size distribution showed similar in the range 350-360 nm.
필자는 서울대학교 의과대학 병리학 교실에서 만든 항 백혈병 항체(항 CALLA 항체, 항 JL-1 항체)에 대해 $^{99m}Tc$과 $^{125}I$의 표지 방법 및 면역학적 성상을 연구하여 임상 응용의 토대를 만들고자 하였다. $^{99m}Tc$은 pretargeting transchelation법으로 $^{125}I$는 lodogen법으로 표지하였다. 각 항체에 대해 결합 반응검사, Scatchard 분석, 변조 현상 검사를 시행하였다. $^{125}I$는 두 항체 모두에서 90%전후의 높은 표지율을 보인 반면, $^{99m}Tc$ 경우 70%이하의 표지율을 보여 개선점이 요구되었다. 결합반응검사에서도 $^{99m}Tc$을 표지한 항체는 30%정도의 낮은 면역 반응성을 보였다. Scatchard 분석 결과 결합상수 모두가 $10^9$으로 좋은 친화력을 보였고, 세포당 항체 결합 수는 $10^4$으로 비교적 높은 농도로 나타났다. 변조 현상은 모든 경우에서 나타나지 않았다. 항 CALLA 항체, 항 JL-1 항체는 향후 림프종과 백혈병의 진단 및 치료에 도움이 될 수 있으리라 기대된다.
In this study, the properties of blue inorganic nano-pigments with a spinel structure were systematically investigated. We report the preparation of a blue ceramic nano-pigment and the Co and Ni substitutional effects on the blue color. $MgAl_2O_4$ was selected as the crystalline host network for the synthesis of cobalt and nickel-based blue ceramic nano-pigments. Various compositions of $Co_xMg_{1-x}Al_2O_4$ and $Ni_xMg_{1-x}Al_2O_4$ ($0{\leq}x{\leq}1$) powders were prepared using apolymerized complex method. The obtained powder was preheated at $400^{\circ}C$ for 5 h and then calcined at $1000^{\circ}C$ for 5 h. XRD patterns of the (Co,Mg)$Al_2O_4$ and (Ni,Mg)$Al_2O_4$ samples showed a single phase of the spinel structure in all compositions. TEM results indicated nano-sized pigments for (Co,Mg)$Al_2O_4$ and (Ni,Mg)$Al_2O_4$ with a particle size ranging from 20 to 50 nm. The characteristics of the color tones of (Co,Mg)$Al_2O_4$ and (Ni,Mg)$Al_2O_4$ were analyzed by CIE $L^*a^*b^*$ measurements. In addition, the thermal stability and the binding characteristics of (Co,Mg)$Al_2O_4$, (Ni,Mg)$Al_2O_4$ are discussed in terms of the TG-DSC and FT-IR results, respectively.
Titanium oxide (TiO2) thin films have valuable properties such as a high refractive index, excellent transmittance in the visible and near-IR frequency, and high chemical stability. Therefore it is extensively used in anti-reflection coating, sensor, and photocatalysis as electrical and optical applications. Specially, TiO2 have a high dielectric constant of 180 along the c axis and 90 along the a axis, so it is highlighted in fabricating dielectric capacitors in micro electronic devices. A variety of methods have been used to produce patterned self-assembled monolayers (SAMs), including microcontact printing ($\mu$CP), UV-photolithotgraphy, e-beam lithography, scanned-probe based micro-machining, and atom-lithography. Above all, thin film fabrication on $\mu$CP modified surface is a potentially low-cost, high-throughput method, because it does not require expensive photolithographic equipment, and it produce micrometer scale patterns in thin film materials. The patterned SAMs were used as thin resists, to transfer patterns onto thin films either by chemical etching or by selective deposition. In this study, we deposited TiO2 thin films on Si (1000 substrateds using titanium (IV) isopropoxide ([Ti(O(C3H7)4)] ; TIP as a single molecular precursor at deposition temperature in the range of 300-$700^{\circ}C$ without any carrier and bubbler gas. Crack-free, highly oriented TiO2 polycrystalline thin films with anatase phase and stoichimetric ratio of Ti and O were successfully deposited on Si(100) at temperature as low as 50$0^{\circ}C$. XRD and TED data showed that below 50$0^{\circ}C$, the TiO2 thin films were dominantly grown on Si(100) surfaces in the [211] direction, whereas with increasing the deposition temperature to $700^{\circ}C$, the main films growth direction was changed to be [200]. Two distinct growth behaviors were observed from the Arhenius plots. In addition to deposition of THe TiO2 thin films on Si(100) substrates, patterning of TiO2 thin films was also performed at grown temperature in the range of 300-50$0^{\circ}C$ by MOCVD onto the Si(100) substrates of which surface was modified by organic thin film template. The organic thin film of SAm is obtained by the $\mu$CP method. Alpha-step profile and optical microscope images showed that the boundaries between SAMs areas and selectively deposited TiO2 thin film areas are very definite and sharp. Capacitance - Voltage measurements made on TiO2 films gave a dielectric constant of 29, suggesting a possibility of electronic material applications.
본 연구는 TOC/TN-IRMS를 이용하여 총 유기탄소 및 총 질소 안정동위원소 분석법을 연구하였으며, 수환경 중저농도 시료에서도 분석이 가능하게 시스템을 구축하였다. 수생태계로 유입되는 다양한 유기탄소 기원을 파악하기 위하여 형광지표와 δ13C-DOC 안정동위원소비를 활용한다면 효율적인 수질 관리를 위한 해석기능을 제공할 것이며, 추후 유역 오염원의 대표값(end member)의 지속적인 조사를 통하여 자료구축이 이루어져야 할 것이다.
Most crop damages have been occurred by vermin(e.g., wild birds and herbivores) during the period between seeding and the cotyledon level. In this study, to minimize the damage by vermin and acquire the benefits such as protection against weeds and maintenance of water content in soil, immediately vinyl mulching after seeding was devised. Vinyl mulching has been generally covered with black color vinyl, that crop seeding locations cannot be detected by visible light range. Before punching vinyl, non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. For this study, the spline method was relatively faster than the other polynomial interpolation methods, because it has a lower maximum order of formulation when using a system such as the tridiagonal linear equation system which provided the capability of real-time processing. The temperature distribution corresponding to the distance between the crops was 10 cm, and the more clearly the leaf pattern of the crop was visually confirmed. The frequency difference was decreased, as the number of overlapped pixels was increased. Also the wave pattern of points where the crops were recognized were reduced.
휴대폰에서 보안 필요성이 증가함에 따라 개인 인증을 위하여 홍채, 지문, 얼굴과 같은 단일 생체 정보를 이용한 많은 연구들이 진행되었으나 단일 생체 인식에서는 인식 정확도에 한계가 있었다. 따라서 본 논문에서는 휴대폰 환경에서 고 인식율을 위해 얼굴과 홍채를 결합하는 방법에 대해 제안한다. 본 논문에서는 근적외선 조명과 근적외선 통과 필터를 부착한 휴대폰의 메가 픽셀 카메라를 사용하여 근적외선 얼굴 및 홍채 영상을 동시에 취득한 후, SVM(Support Vector Machine)을 기반으로 스코어 레벨에서 결합하였다. 또한, 저 연산의 로가리듬(Logarithm) 알고리즘을 사용한 얼굴 데이터의 조명 변화에 대한 정규화와 극 좌표계 변환 및 홍채 코드의 비트 이동 매칭에 의한 홍채 영역의 이동, 회전, 확대 및 축소에 대한 정규화를 통해 SVM의 분류 복잡도와 얼굴, 홍채 데이터의 본인 변화도를 최소화함으로써 인식 정확도를 향상시켰으며, 저 연산의 휴대폰 환경에서 정수혈 기반의 얼굴 및 홍채 인식 알고리즘을 사용하여 처리시간을 향상시켰다. 실험 결과, SVM을 사용한 인식의 정확성이 단일 생체(얼굴 또는 홍채), SUM, MAX, MIN 그리고 Weighted SUM을 사용하는 것보다 우수한 것을 알 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.