• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1637-1643
• /
• 1989

In this study, phosphosilicate glass(PSG) film was deposited by the oxidation of phosphine (PH3) and silane(SiH4) in nitrogen ambient with a conventional conveyerized Atmospheric Pressure Chemical Vapor Deposition(APCVD)system and phosphorus concentration is measured by using FT-IR technique. The flow characteirstics and etch rate variations ofthe films, depending on phosphorus concentrations, are investigated. Special emphasis is focused on the yield variations of NMOS-based 256K DRAM with 1.2\ulcorner metallization spacing with increasing phosphorus concentrations. As a result, the data indicates that the fairly good yield can be obtained within the range of between 8 and 10wt% phosphorus concentration, which result in a slope of flow within 45\ulcorner10\ulcorner The analysi of failure mechanism is also accompanied.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1997년도 춘계학술발표회 논문집
• /
• pp.26-31
• /
• 1997

유리섬유/nylon 6 복합재료의 계면결합강도를 증가시키기 위하여 r-APS(r-Aminopropyltriethoxysilane)로 유리섬유의 표면을 처리 하였다. 이때 표면처리의 최적 조건을 찾기위해서 처리후 기기분석과 계면결합강도 측정 등을 하였다. 농도, pH, 처리시간, 온도를 변화시키면서 표면처리를 한 후 흡착량을 살펴본 결과 처리 농도에 의해서는 흡착량이 단조증가하였으며 처리시간에 따라서는 5분정도에서, 처리온도에 의해서는 30C 부근에서 최대 흡착량을 보였다. 또한 pH에 따른 흡착량은 silane의 고유 pH인 10.5부근에서 최대치를 나타냈다. FR-IR 분석에 의하면 NH2의 NH3 bending mode가 1607cm-1, 1575cm-1에서 나타났으며 SiOH의 SiO band는 960cm-1에서 나타났다. XPS를 통해서는 N ls와 Si 2p의 존재를 확인할 수 있었다. 표면처리된 유리섬유와 matrix인 nylon 6를 이용해 단섬유내장시편을 만들어 fragmentation test를 한 결과 계면결합강도는 약 5분의 처리시간과 1%(wt%)의 농도에서 최대값을 보였다.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.133-137
• /
• 2014

The recent development of electro-optic devices and anticorrosion media has made it necessary investigate infrared optical systems with solid-solid interfaces of materials with amorphous characteristics. One of the most promising classes of materials for these purposes seems to be chalcogenide glasses, which are based on the Ge_Sb_Se system, have drawn much attention because of their use in preparing optical lenses and fibers that are transparent in the range of 3-12 um. In this study, a standard melt-quenching technique was used to prepare amorphous Ge_Sb_Sechalcogenideto be used in the design and manufacture of infrared optical products. The results of structural, optical, and surface roughness analyses of high purity Ge_Sb_Sechalcogenide glasses after various annealing processes reported.

• Transactions on Electrical and Electronic Materials
• /
• 제18권1호
• /
• pp.13-15
• /
• 2017

Low emissivity glass for high transparency in the visible range and low emissivity in the IR (infrared) range was fabricated and investigated. The multilayers were have been fabricated, and consisted of two outer oxide layers and a middle layer of Ag as a metal layer. Oxide layers were formed by rf sputtering and metal layers were formed using by an evaporator at room temperature. SiInZnO (SIZO) film was used as an oxide layer. The OMO (oxide-metaloxide) structures of SIZO/Ag/SIZO were analyzed by using transmittance, AFM (atomic force microscopye), and XRD (X-ray diffraction). The OMO multilayer structure was designed to investigate the effect of Ag layer thickness on the optical property of the OMO structure.

• 한국재료학회지
• /
• 제26권11호
• /
• pp.598-603
• /
• 2016

The recent development of electro-optic devices and anticorrosion media has led to the necessity to investigate infrared optical systems with solid-solid interfaces of materials that often have the characteristic of amorphousness. One of the most promising classes of materials for those purposes seems to be the chalcogenide glasses. Chalcogenide glasses, based on the Ge-Sb-Se system, have drawn a great deal of attention because of their use in preparing optical lenses and transparent fibers in the range of 3~12 um. In this study, amorphous Ge-Sb-Se chalcogenide for application in an infrared optical product design and manufacture was prepared by a standard melt-quenching technique. The results of the structural, optical and surface roughness analysis of high purity Ge-Sb-Se chalcogenide glasses are reported after various annealing processes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1494-1496
• /
• 2002

내열 충격성 및 적외선 투과를 갖는 LAS($Li_2O-Al_2O_3-SiO_2$)계 글라스세라믹스를 제조하였다. 본 연구에서는 LAS계에 $TiO_2$를 핵형성제로, 점도를 감소시키기 위해 $P_2O_5$를 첨가하여 유리를 제조한 후, 글라스세라믹 결정상을 석출시켰다. 석출된 주 결정상은 ${\beta}$-eucryptite(SS)이었으며, 열팽창 계수가 거의 제로에 가까운 값을 얻었다. 또한 선택적인 스펙트럼의 흡수를 위한 color dopants에 대한 기초 자료 등이 조사되었다.

• Rapid Communication in Photoscience
• /
• 제1권2호
• /
• pp.27-29
• /
• 2012

Noble diamine monomers containing thiophene moiety were prepared, such as 2,5'''-diamino-2, 2':5', 2'':5'', 2'''-quaterthiophene (4TDA) and 2, 5'''''-diamino-3'', 4'''-dihexyl-2,2':5', 2'':5'', 2''':5''', 2'''':5'''', 2'''''-sexithiophene (6TDA). Then, these monomers were utilized to prepare polyimides with 3,6-diphenylpromellitic dianhydride (DPPMDA), 3,6-di(4'-trifluoro-methylphenyl) pyromellitic dianhydride (6FPMDA) or 3,6-di(3',5'-bis (trifluoromethyl)phenyl) pyromellitic dianhydride (12FPMDA) via a conventional two-step process. The polyimides were characterized by FT-IR, TGA and DSC, and then subjected CV, UV-vis and PL measurements. The polyimides containing thiophene moiety exhibited high glass transition temperatures ($280{\sim}310^{\circ}C$) and excellent thermal stability (> $420^{\circ}C$) in air as well as green emission (535~586 nm).

• Journal of Applied Biological Chemistry
• /
• 제43권4호
• /
• pp.273-276
• /
• 2000

In the course of surveying the anti-plaque agents for dental caries prevention, the extract of Korean green tea leaves (KGTL) was tested for inhibitory activity against Streptococcus mutans adhering to glass surfaces in the presence of crude glucosyltransferase (GTase). The extracts of KGTL showed a positive inhibitory activity against GTase. The active compound was purified through Sephadex LH-20 and MCI gel CHP-20P columns. A positive reaction was shown in the anisaldehyde-$H_2SO_4$ test, which confirmed the condensed tannin. The inhibitory compound was identified as 3-galloylprocyanidin $B_3$ through IR, negative FAB-mass, and $^{1}H$-NMR spectroscopic analyses. Acetone extract and 3- galloylprocyanidin $B_3$ of KGTL showed inhibitory effect against GTase. The percent of inhibition was determinated to be 71.84% (P<0.01) with 10 mM 3-galloylprocyanidin B3. The 3-galloylprocyanidin $B_3$, which possessed a galloyl, showed a higher inhibitory activity against glucosyltransferase than monomeric (+)-catechin and procyanidine $B_3$ which had no galloyl group.

• Elastomers and Composites
• /
• 제27권4호
• /
• pp.267-274
• /
• 1992

Polydimethylsiloxane(PDMS)-containing polyurethane coating materials were synthesized because PDMS-based elastomers have unique properties including an extremely low glass transition temperature, good thermal and oxidative stability, and good dielectric properties. In this experiment a vinyl copolymer which consisted of vinyl chloride, vinyl acetate, vinyl alcohol, and maleic acid was used, and Coronate L was used as a polyisocyanate. PDMS-containing polyurethane was synthesized from polydimethylsiloxane, MDI, and 1,4-butanediol. Films were casted by reaction of viny copolymer, Coronate L, and PDMS-containing polyurethane. Thickness of tile films were $150-170{\mu}m$ and the films were characterized by IR, DSC, and Instron.

• 한국세라믹학회지
• /
• 제35권1호
• /
• pp.11-16
• /
• 1998

$VO_2$ thin films have been prepared on borosilicate glass substrate using alkoxide method to characterize the effects of fabricating factors on thermochromic performance. The gel films formed by spin coating were converted to $V_2O_5$ phase during oxidizing heat-tratment and the $VO_2$ phase were formed by reducing heat-treatement. The thermochromic switching properties of $VO_2$ thin films are strongly affected by the crystal phase and microstructure and those could be controlled by reducing heat-treatment conditions. The ther-mochromic switching characteristics of $VO_2$ thin films synthesized were measured at IR (2.5$\mu\textrm{m}$) as the transition temperature of $63^{\circ}C$ the transition width of $3.6^{\circ}C$and the maximum and minimum transmittance of 84% and 14% respectively.