• 한국인터넷방송통신학회논문지
• /
• 제21권6호
• /
• pp.1-8
• /
• 2021

몰카범죄의 증가에 발맞추어 은닉형 카메라는 스마트폰의 기술발전 속도에 따라 소형화 및 기술 집적이 고도화되어 성능이 날로 발전하고 있다. 이러한 외적인 네트워킹 컴퓨팅 환경이 고도화 되고, 활동이 많은 현대인의 생활양상이 다양화됨에 따라 일반 안전용 카메라외에 은닉형 카메라에 노출 또한 증가되고 있는 추세이다. 반면 은닉형 카메라를 탐지하고 예방하기 위한 기술은 이러한 은닉형 카메라 기술발전과 속도를 따라가지 못하고 있는 실정이다. 이에 본 연구에서는 일반영상과 열화상 이미지 합성기술을 바탕으로 적외선 열 방식의 탐지기술을 이용하여 은닉카메라의 발열을 감지하고, 주변 온도 차이에 따른 각 파장의 반사율을 분석하여 오탐율도 줄이도록 하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.28.4-28
• /
• 2001

This paper proposes an IR camera system that performs the task of removing mines for humanitarian purposes. Because of the high risks involved, it is necessary to conduct mine detection from the most remote endeavoring. By mating use of infrared ray (IR) cameras, scattered mines can be detected from remote locations. In the case of mines buried in the ground, detection is possible if the peripheral temperature difference is large enough between the ground and mine weapon. As one of the world´s advanced nations in sensor technology, Japan should promote surveys and studies for detecting mines safely by using its advanced remote sensing technologies.

• 한국콘텐츠학회논문지
• /
• 제11권5호
• /
• pp.205-215
• /
• 2011

분광특성의 차이로 필름은 자외선에 민감한데 반해 디지털 카메라의 센서는 적외선에 굉장히 민감하다. 이에 따라 CCD 또는 CMOS를 사용하는 모든 디지털 카메라에는 IR Cut-Off Filter가 센서전면에 장착되어 있다. 이상적으로 100% 적외선을 차단하여야 하지만 실험 결과 완전히 적외선을 차단하지 못하고 있었으며, 각 카메라마다 적외선 투과량 또한 달랐다. 따라서 본 연구는 디지털 카메라에 장착되어 있는 IR Cut-Off Filter의 기계적 특성에 의해 투과되는 미량의 적외선이 디지털 화상이미지에 끼치는 영향을 분석하는 데 그 목적이 있다. UV필터를 장착한 상태(적외선 투과상태)와 UV-IR필터를 장착한 상태(적외선미투과상태)를 비교분석한 결과, 잡음(Noise)과 색 재현력 평가에서는 그 차이가 미세하거나 거의 동등한 수준이지만, 동적 폭(Dynamic Range)과 해상도에는 IR Cut-Off Filter를 통해 투과되는 미량의 적외선이 어느 정도 영향이 있음을 확인할 수 있었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권2호
• /
• pp.86-94
• /
• 2009

This paper deals with the creation of a new, low-cost point/position tracking system that can measure deformations in engineering structures with simple commercially widespread cameras. Though point tracking systems do exist today, such as Stereo Pattern Recognition (SPR) and Projection Moir$\acute{e}$ Interferometry (PMI) systems, they are far too costly to use to analyze small, simple structures because complex optical components such as large flashes, high-resolution cameras and data acquisition systems with several computers are required. We developed a point tracking system using commercial cameras. This system used IR LEDs and commercial IR CCD cameras to minimize the interference posed by other extraneous light sources. The main algorithm used for this system is an optical point tracking algorithm, which is composed of the point extraction algorithm and the point matching algorithm for 3-D motion estimation. a series of verification tests were performed. Then, the developed point tracking system was applied to measure deformations of an acrylic plate under a mechanical load. The measured deformations of the acrylic plate matched well with the numerical analysis results. The results indicate that the developed point tracking system is reliable enough to measure continuous deformed shapes of various engineering structures.

• 한국인터넷방송통신학회논문지
• /
• 제18권3호
• /
• pp.9-16
• /
• 2018

미디어파사드 기술은 투사할 대상의 입면(立面, elevation)에 정합처리가 된 콘텐츠를 필요로 한다. 이런 이유로 투사될 대상체가 바뀔 때마다 같은 콘텐츠라도 정합처리를 매번 다시 수행해 주어야 한다. 이런 문제점은 투사 대상체의 입면을 분석하여 콘텐츠를 실시간으로 자동 정합 처리하여 투사하는 방법으로 해결 가능하다. 그러나 아직까지 콘텐츠의 실시간 매핑에 대해서는 뚜렷하고 획기적인 연구결과를 찾기 어렵기 때문에 새로운 연구가 반드시 필요하다. 본 논문에서는 투사될 대상의 입면정보를 분석하여 최적화된 투사영상을 실시간으로 얻을 수 있는 새로운 알고리즘을 제안하고 구현한다. 제안된 방법은 IR카메라를 이용하여 얻어지는 입면의 깊이정보를 이용하여 영상 정합을 실시간 처리한다.

• 한국항공우주학회지
• /
• 제39권12호
• /
• pp.1160-1165
• /
• 2011

본 연구는 무인항공기 및 헬리콥터 등에 장착되어 운용되는 고정밀 관측 다축 구동 EO/IR 카메라의 진동해석에 관한 것이며, 카메라에 적용된 볼 베어링을 모델링 하는데 있어서 3축 스프링요소를 적용하는 방법을 제시하였고, 이것에 의한 유한요소모델의 진동 응답 결과를 얻었다. 볼 베어링을 3축 스프링 요소로 모델링한 진동해석결과는 시험결과와 비교 되었으며, 잘 일치함을 알 수 있었다. 또한, 랜덤진동 시간이력해석을 통하여 다축 구동 EO/IR 카메라의 진동 응답 특성을 해석하고 분석하였다. 이의 연구결과는 우주용 카메라들에 사용되는 볼 베어링의 유한요소모델링 기법에 응용될 수 있다.

• 복식문화연구
• /
• 제30권4호
• /
• pp.579-593
• /
• 2022

This study examines the surface characteristics, electrical conductivity, electromagnetic wave blocking characteristics, infrared (IR) transmittance, stealth function, thermal characteristics, and moisture characteristics of IR thermal imaging cameras. Nylon film (NFi), nylon fabric (NFa), and 5 types of nylon mesh were selected as the base materials for aluminum sputtering, and aluminum sputtering was performed to study IR thermal imaging, color difference, temperature change, and so on, and the relationship with infrared transmittance was assessed. The electrical conductivity was measured and the aluminum-sputtered nylon film demonstrated 25.6kΩ of surface resistance and high electrical conductivity. In addition, the electromagnetic wave shielding characteristics of the sputtering-treated nylon film samples were noticeably increased as a result of aluminum sputtering treatment as measured by the electromagnetic wave blocking characteristics. When NFi and NFa samples with single-sided sputtering were placed on the human body (sputtering layer faced the outside air) and imaged using IR thermographic cameras, the sputtering layer displayed a color similar to the surroundings, showing a stealth effect. Moreover, the tighter the sample density, the better the stealth function. According to the L, a, b measurements, when the sputtering layer of NFi and NFa samples faced the outside air, the value of a was generally high, thereby demonstrating a concealing effect, and the △E value was also high at 124.2 and 93.9, revealing a significant difference between the treated and untreated samples. This research may be applicable to various fields, such as the military wear, conductive sensors, electromagnetic wave shielding film, and others.

• Structural Monitoring and Maintenance
• /
• 제3권3호
• /
• pp.277-296
• /
• 2016

There is a need for rapid and objective assessment of concrete bridge decks for maintenance decision making. Infrared Thermography (IRT) has great potential to identify deck delaminations more objectively than routine visual inspections or chain drag tests. In addition, it is possible to collect reliable data rapidly with appropriate IRT cameras attached to vehicles and the data are analyzed effectively. This research compares three infrared cameras with different specifications at different times and speeds for data collection, and explores several factors affecting the utilization of IRT in regards to subsurface damage detection in concrete structures, specifically when the IRT is utilized for high-speed bridge deck inspection at normal driving speeds. These results show that IRT can detect up to 2.54 cm delamination from the concrete surface at any time period. It is observed that nighttime would be the most suitable time frame with less false detections and interferences from the sunlight and less adverse effect due to direct sunlight, making more "noise" for the IRT results. This study also revealed two important factors of camera specifications for high-speed inspection by IRT as shorter integration time and higher pixel resolution.

• 복식문화연구
• /
• 제30권1호
• /
• pp.88-101
• /
• 2022

Molybdenum is used in electrical contacts, industrial motors, and transportation materials due to its remarkable ability to resist heat and corrosion. It is also used to flame coat other metals. This study investigated, the thermal characteristics of the molybdenum sputtered material, such as electrical conductivity, and stealth effects on infrared thermal imaging cameras. To this end, molybdenum sputtered samples were prepared by varying the density of the base sample and the type of base materials used. Thereafter, the produced samples were evaluated for their surface state, electrical conductivity, electromagnetic field characteristics, thermal characteristics, stealth effect on infrared thermal imaging cameras, and moisture characteristics. As a result of infrared thermal imaging, the molybdenum layer was directed towards the outside air, and when the sample was a film, it demonstrated a greater stealth effect than the fabric. When the molybdenum layer was directed to the outside air, all of the molybdenum sputtering-treated samples exhibited a lower surface temperature than the "untreated sample." In addition, as a result of confirming electrical properties following the molybdenum sputtering treatment, it was determined that the film exhibited better electrical conductivity than the fabric. All samples that were subjected to molybdenum sputtering exhibited significantly reduced electromagnetic and IR transmission. As a result, the stealth effect on infrared thermal imaging cameras is considered to be a better way of interpreting heat transfer than infrared transmission. These results are expected to have future applications in high-performance smartwear, military uniforms, and medical wear.

• 한국산업융합학회 논문집
• /
• 제27권1호
• /
• pp.57-62
• /
• 2024

This study conducted a measurement method of high temeprature conditions using infrared termography. All objects emit infrared light, and this emissivity has a significant impact on the temperature measurements of infrared thermal imaging (IR) cameras. In order to measure the temperature more accurately with the IR camera, correction equations were derived by measuring the emissivity according to the temperature change of combustible metals in a high-temperature environment. Two combustible metals, Mg and Al, were used to measure emissivity with changing temperature. Each metal was heated, the emissivity was measured by comparing the temperature with IR camera and thermocouples so that the correlation between temperature and emissivity could be anslyzed. As a result of the experiment, the emissivity of the metals increases as the temperature increased. This can be interpreted as a result of increased radiation emission as the thermal movement of internal metal molecules increased.