• Journal of Technologic Dentistry
• /
• v.32 no.4
• /
• pp.351-356
• /
• 2010

Purpose: The purpose of this study was to evaluate the fracture strength between the core and veneering ceramic according to 2 core materials, In-Ceram Alumina and In-Ceram Zirconia, fabricated by electro ceramic layering technique. 2 different fixed partial denture cores of three units were veneered by veneering ceramic(Ceranion, Noritake) (n=10). Methods: The fracture strengths between the core and veneering ceramic were measured through the 3 point bending test. The interfaces between the core and veneering ceramic were observed with the X-ray dot mapping of EPMA. Results: The result of fracture strength was observed that IZP group, In-Ceram Zirconia core, had higher fracture strength. IPA group, In-Ceram Alumina core, had fracture strength of 359.9(${\pm}$86.2) N. IZP group, In-Ceram Zirconia core, had fracture strength of 823.2(${\pm}$243.0) N. X-ray dot mapping observation showed that a major element in the core and veneering ceramic of IPA group was alumina and silica, respectively. No binder was observed in interfaces between the core and veneering ceramic, and no ion diffusion or transition was observed between the core and veneering ceramic. However, apparent ion diffusion or transition was observed between the core and veneering ceramic of IZP group.

• The Journal of the Korea Contents Association
• /
• v.12 no.9
• /
• pp.500-511
• /
• 2012

Recently, use frequency for traffic information which provides shortest paths and traffic condition is increasing. Specially, in the survey, it is shown that users prefer internet portal sites which can be used the most easily among traffic information media. But, there are not many verification systems for traffic information contents of internet portal sites which collect and provide information than traffic information contents which are provided by public service. The purpose of this study is to investigate real accuracy and accuracy felt by users about information provided by portal sites. Therefore, in this research we verified accuracy of information by portal site with real field data and investigate real usage about contents and experienced accuracy by users through survey. Also, users' expectation and satisfaction were surveyed and the contents to be improved were selected by using IPA technique. By the result of accuracy verification by field data using portable DSRC(Dedicated Short Range Communication) devices, it is shown that average error was 14~32% and sometimes very high rate. Also, it is shown that 28.3 % of total respondents prefers the information by portal sites and 50 % of total respondents felt that contents of traffic information by portal sites are not accurate. Real-time traffic condition was selected as the most inaccurate one among all contents of traffic information and it was analyzed that intensive efforts for improving information about real-time traffic condition are needed.

• Korea Trade Review
• /
• v.48 no.1
• /
• pp.243-261
• /
• 2023

This study was conducted with the goal of analyzing the needs of Truckers, who are the main users of the cargo transportation platform, to find a development direction for the improvement and activation of the cargo transportation platform service. For this purpose, this study conducted an empirical analysis through IPA analysis targeting Truckers using domestic cargo transportation platforms. As a result of the IPA analysis, in the case of importance, fair fare presentation, unfair trade prevention measures, transportation payment deadline accuracy, transportation section information provision accuracy, quick interaction, application system quality, ease of use, user-customized service, settlement service support function, Variety of transportation sections, brand image, and additional services were shown in order. In the case of satisfaction, ease of use, settlement service support function, transport section information provision accuracy, application system quality, brand image, additional services, user-customized service, transport section diversity, quick interaction, transport payment deadline accuracy, unfair transaction prevention Measures and fair fares were presented in that order. The analysis results show high satisfaction with the ease of use related to the platform quality and the function to support the settlement work. These results can be seen as the result of a significant investment in system quality improvement for the convenience of users by suppliers in the domestic cargo transportation platform industry, where competition has become fierce. As the factors most urgently needed for improvement, 'observance of payment deadlines', 'prevention of unfair trade', and 'provision of fair fares' were selected, and these are related to chronic problems in the domestic freight transportation industry.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.43-52
• /
• 2007

Offset printing is one of the well known printing technique of lithographic process and consists of image area and 'non-image area on a flat image carrier. The surface tension of dampening water can be controlled by adding IPA after mixing of raw water and etching solution. The etching solution contains a surfactant for reducing surface energy, a clean agent for non-imaging area, wetting agent for protecting non-imaging area from oil components like ink and also an emulsifying agent for controlling emulsification. In this study, the present situation of dampening water maintenance has examined by collecting dampening water using at domestic companies. The pH related to dampening water, conductivity, contact angle, emulsification curve are measured to define the current situation of dampening water control of each companies and to analyze the relationship among measured properties. In the study most of companies among 16 printing companies tested controlling dampening water through pH value. However, the quality of printing has varied depending upon conductivity, contact angle, IPA content, and emulsification value. The control of dampening water should be carry at the state of the standard when adding proper ratio of etching solution. It would be more effective when pH or conductivity control carries out in parallel with controlling dampening water. Therefore the concept that pH5.5 is correct is based concept. Based on these initial tests it is defined that the standardization of dampening water control is required.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.24-33
• /
• 2021

Cost management is a major function of CM (construction management) companies for clients and cost estimating is a critical task in that it provides a baseline for cost management and a foundation for decision making in construction projects. For this purpose, CM companies need to obtain and use good quality data, which leads to more accurate and efficient cost estimating. As the use of big data becomes increasingly important in the construction industry, researches related to the theme have become the active areas of studies. However, literature review shows that the current situations in relation to the use of big for cost estimating of CM companies are under-researched. The objective of the study is to identify key characteristics and implications in the use of big data for cost estimating of CM companies, which can contribute to develop strategies for such purposes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.6
• /
• pp.117-125
• /
• 2004

This paper describes the test technique for the full-scale airframe durability test according to the military handbook(MIL-HDBK-1530) and ASIP(Aircraft Structure Integrity Program) to evaluate structural integrity and to obtain basic data for IPA(Initial Production Approval) of the Korean advanced trainer(T-50). This paper covers the full-scale airframe floating setup technique, the optimized test load simulation method, test rig design technique, test setup design and installation techniques, test safety device design and operation technique, and durability test results. As 1st life durability test was successfully performed, it was confirmed that this method is available in a full-scale airframe structural test.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.437-445
• /
• 2015

The layout of facilities, in relation to information and navigational displays, has great influence on subway satisfaction, and tend to vary depending on the types of subway platform and transit station. However, until now, few studies have covered such aspects as of yet. Starting from this viewpoint, the purpose of this study was to use an IPA analysis technique to analyze that satisfaction on the importance of facilities to aid in accessibility, such as elevators and escalators, transit amenities and information and navigational displays depending on the types of platform and transit station. To do so, we've classified 15 metropolitan stations according to types of platform and transit station and analyzed differences in user importance and satisfaction as well as improvements for platforms and transit stations of similar type. By the analysis results of this study, we've concluded that the proper selection and positioning of elevator and escalator facilities and information and navigational displays was important when designing the subway station according to platform type (separate platform) and or according to the transit station type (cross, L, T types) where pedestrian flow heavily intersected. We considered that such analysis results would be helpful in the design of new stations and the enhancement of existing stations pursuant to a new direction that minimizes user inconvenience, and that improvement items should be developed first according to the platform and transit station types, which would be helpful in enhancing the efficiency of the subway improvement cost.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.5
• /
• pp.171-174
• /
• 2016

The diamond wire sawing method to produce silicon wafers for the photovoltaic application is still a new and highly investigated wafering technology. This technology, featured as the higher productivity, lower wear of the wire, and easier recycling of the coolant, is expected to become the mainstream technique for slicing the silicon crystals. However, the saw marks on the wafer surface have to be investigated and improved. This paper discusses the removal of saw marks on diamond wire-sawn single crystalline silicon wafer. With a pretreatment step using tetramethyl ammonium hydroxide ($(CH_3)_4NOH$, TMAH) and conventional texturing process with KOH solution (1 % KOH, 8 % IPA, and DI water), the saw marks on the surface of the diamond wire-sawn silicon wafers can be effectively removed and they are invisible to naked eyes completely.

• Korean Journal of Environment and Ecology
• /
• v.37 no.4
• /
• pp.273-288
• /
• 2023

Although many studies have been conducted on techniques and effects that can be applied to forest meditation in domestic forest healing meditation research, there has been little research on the space where forest meditation takes place. Nevertheless, a meditation space is not just a place concept but a forest environment element responsible for the healing function of a forest, i.e., a place containing healing factors, and can be an essential clue to the healing mechanism. Therefore, to determine whether a healing forest meditation space is suitable for meditation, this study selected the attribute items of the meditation space using the Delphi expert survey and then surveyed the user satisfaction of the healing forest meditation space using the IPA (Importance Performance Analysis) technique. The survey was conducted from August to November 2022, targeting 315 adults who used the forest meditation space at the National Center for Forest Therapy, the Saneum Healing Forest, and the Jathyanggi Pureunsup Arboretum in Gyeonggi Province. The result of the IPA analysis showed the average satisfaction with the forest meditation space was relatively high at 4.33 points on a 5-point Likert scale (4.33 points for the National Center for Forest Therapy, 4.34 points for the Saneum Healing Forest, and 4.37 points for the Jathyanggi Pureunsup Arboretum), indicating that the three healing forest meditation spaces were suitable for forest meditation. Satisfaction with the "Sounds of nature" was high in all three forests. On the other hand, all three forests showed a relatively low satisfaction with "Quietness," indicating it to be a priority problem to be addressed. Also, an open-ended questionnaire survey showed that the mediation space's natural elements, such as natural sounds, scenery, air, forest spaces, and scents, had a higher positive impact on meditation satisfaction than artificial elements, such as facilities. Therefore, it is essential to secure sound resources such as the sound of water and birds around the meditation space, and it is also necessary to consider ways to create a meditation forest in an independent area to avoid encounters with visitors and allow only participants in the forest healing meditation program to enter to increase satisfaction with forest meditation.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.6
• /
• pp.636-645
• /
• 2012

The purpose of this study is to investigate factors influencing dietary satisfaction, and their perceived importance and performance, in North Korean refugees according to age. Questionnaires were completed by 220 North Korean refugees and data was analyzed with SPSS software. From our study we determined that fresh food, clean dishes, and proper vegetable oil are of high importance but considered poorly performed. 'Taste' and 'comfort' were factors with low importance but considered well-performed. The IPA technique proved that 8 items including Q4, Q5, Q6, Q7, Q8, Q9, Q11, Q13 were in 'Doing great, keep it up' and no items that got high importance and low performance were in 'Focus here'. North Korean refugees like Korean food more than Chinese, Japanese, and Western food. They specifically want to learn how to cook Korean casseroles, soups, and side dishes(e.g. Myeolchibokkum, Kongjorim). The North Korean refugees who resided in South Korea under a year have difficulties in understanding menus and Western table manners.