• Journal of information and communication convergence engineering
• /
• 제14권2호
• /
• pp.89-96
• /
• 2016

In mobile communication, there are various types of handoff for the support of all forms of mobility. Proxy mobile IPv6 (PMIPv6) enables local network-based mobility management of a mobile node without any effect of mobility-related signaling. Recently, PMIPv6 has been considered for supporting mobility management in LTE/SAE-based mobile networks. To support seamless mobility in heterogeneous mobile networks, the overall cost of handoffs needs to be minimized and the procedure should be guaranteed to be secure. However, the reduction of the authentication cost has not been fully investigated to provide seamless connectivity when mobile users perform a handoff between the PMIPv6 domains. This paper proposes secure pre-authentication schemes, completing an authentication procedure before performing a handoff, for a fast handoff in PMIPv6. Analytic models have been used for measuring the authentication latency and for the overhead cost analysis. In addition to providing fast authentication, the proposed pre-authentication schemes can prevent threats such as replay attacks and key exposure.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2007년도 가을 학술발표논문집 Vol.34 No.2 (D)
• /
• pp.514-519
• /
• 2007

본 논문에서는 최근 IETF에서 표준화되고 있는 네트워크 기반 IPv6 이동성 프로토콜인 Proxy Mobile IPv6 (PMIPv6)를 IEEE 802.16e 네트워크에 적용할 때에 고속으로 핸드오버를 처리함과 동시에 패킷 버퍼링을 통하여 패킷의 손실과 순서의 어긋남 문제를 해결하여 단말 사용자가 서로 다른 IP 네트워크를 옮겨다니더라도 그에 따르는 패킷손실이나 세션 끊김 현상을 최소화하는 기법을 제안한다.

• 천문학논총
• /
• 제13권1호
• /
• pp.85-98
• /
• 1998

In this paper we describe MS-TCS, the telescope control system which was developed in Korea Astronomy Observatory. MS-TCS can control an equatorial type telescope equipped with stepping motors and incremental type optical encoders. MS-TCS consists of (1) POINT_TEL which is the program roning in a PC and (2) TCS-196 which is the electroics board to control the telescope. The communication between the PC and TCS-l96 is done through RS-232 or RS-422 serial line. MS-TCS can control the secondary mirror and dome. It also provide network function using TCP/IP for remote control of the telescope. MS-TCS is suitable for controlling medium to small size telescope for research and education.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2000년도 봄 학술발표논문집 Vol.27 No.1 (B)
• /
• pp.705-707
• /
• 2000

본 논문에서는 교육 실험용으로 사용할 수 있는 실시간 시스템 프로토타입 tool kit을 개발하였다. 하드웨어 부분에서는 8개의 센서 입력 채널과 8개의 제어 신호 출력 채널을 가지는 AT(ISA) 버스용 I/O 보드를 제작했다. 소프트웨어 부분에서는 실시간 운영체제인 VxWorks 상에서, 이 I/O 보드를 제어할 수 있는 디바이스 드라이버를 구현하고, 이를 바탕으로 멀티 스레딩과 우선 순위 스케줄링을 이용한 세차장 모델 제어 프로그램을 제작했다. 또, 현재 부각되고 있는 인터넷을 통한 원격 제어를 실현하기 위해 TCP/IP 기반의 웹서버와 자바 애플릿으로 구현된 원격 제어 클라이언트도 내장시켰다. 그리고 이 tool kit의 효용성을 입증하기 위해 Lego Dacta를 이용하여 세차장모형을 제작하고 본 tool kit에 접속하여 인터넷에서 원격 제어가 가능한 실시간 새차장 시스템의 프로토타입을 구현하여 보았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.488-491
• /
• 2002

This growth if WWW(World Wide Web) with the spread of ADSL provides us with a variety of service that are the extensions of opportunities to get information. a various education methods by remote courses and electronic commerce. Remote Monitoring Server(RMS) that uses internet and WWW is constructed for chip mounter. Hardware base consists of RMS, chip mounter and C/S server. In this paper, we realize the remote management system with monitoring and diagnosis function to efficiently operate chip mounter the one of PCB assembly equipment. The remote management system for chip mounter consists of RMS(Remote Monitoring Server) and C/S server. RMS manages real-time information from chip mounter through TCP/IP. RMS that utilizes real-time information informs user of the actual output the operation status of chip mounter, user of the actual output, the operation status of chip mounter, the trouble code and the trouble description.

• Journal of Information Technology Applications and Management
• /
• 제20권3호
• /
• pp.105-127
• /
• 2013

Information and Communication Technology (ICT) has become a vital instrument for delivering a number of services such as education, healthcare and public services. Community wireless networks are community-centric telecommunication infrastructure developed to provide affordable communication for those who live in remote areas. This chapter discusses the role of Nepal Wireless in achieving socio economic development of rural communities by facilitating affordable Internet access. We analyze the challenges Nepal Wireless faced and articulate on the approaches it took to address those challenges such as lack of technical skills, appropriate technology and funding, difficult geographical terrains, unstable political situation, and expensive devices. In addition, we address the success and failure factors of this community-based ICT4D approach in order to guide similar endeavors. We conclude the chapter by some suggestions for policy makers, community developers, and academicians.

• Journal of the Optical Society of Korea
• /
• 제11권3호
• /
• pp.101-107
• /
• 2007

In this paper, we have presented the results of Wavelength Division Multiplexing-Passive Optical Network (WDM-PON) based fiber-to-the-home (FTTH) field trial test which was held in the city of Gwangju. We have implemented an injection locked Fabry-Perot Laser Diode (FP-LD) based WDM-PON system and reliably delivered Internet Protocol TV (IP-TV), networked Personal Video Recorder (N-PVR), High-Definition Video on Demand (HD-VoD), Education on Demand (EoD) and Internet service as FTTH service through the system during the field trial test. We have also verified that the WDM-PON system worked well to provide quality of service (QoS) guaranteed 100Mbps bandwidth per subscriber. Furthermore, we have presented network designing issues in Outside Plant (OSP) and Customer Premises Network (CPN) that should be overcome to efficiently deploy FTTH service. Finally, based on the field trial test results, we proposed FTTH service deployment strategies.

• Journal of information and communication convergence engineering
• /
• 제2권2호
• /
• pp.106-109
• /
• 2004

This study designs a load balancer via direct routing that share a virtual service on a single IP address in the Linux system and suggests an efficient load balancing method to improve transmission speed in the web server cluster environment. It will increase performance and scalability with fast packet transfer and removing bottleneck problem by using TCP Splicing and Content-Aware Distributor method. This method is expected to be the noticeable technology that provides an important interface, which make application services for e-commerce effectively be applied to high-speed network infrastructure. At this time, it is required to study further on the optimum balancing method in the web server cluster environment so as to apply the hybrid (optimum load balancing method by software and hardware) method and improve the reuse of security cession based on high-speed TCP connections.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2001년도 춘계학술발표논문집 (상)
• /
• pp.569-572
• /
• 2001

무선 LAN 환경의 증가로 인하여 Mobile IP를 기반으로 하는 이동 호스트의 핸드오프 횟수가 증가함에 따라 핸드오프 수행 시 발생하는 패킷 손실, 지연 시간, 오버헤드를 최소화하기 위하여 더 향상된 핸드오프 기법을 제안한다. 제안된 핸드오프 기법은 다음 셀 예측 (Next-Cell Prediction)기법으로 무선 LAN 기술을 이용하며, 현재 FA(Foreign Agent)가 아닌 이동 호스트가 방문할 FA에 패킷을 버퍼링 하고, 버퍼링 된 패킷의 포워딩 시간을 최소로 하며, 셀 사이를 이동할 때에 두 셀의 영역이 중첩되는 지점에서의 계층 이동 여부를 시그널의 세기를 측정하여 결정함으로써 성능 향상을 가져온다.

• International Journal of Advanced Culture Technology
• /
• 제10권2호
• /
• pp.233-239
• /
• 2022

Recently, research is being conducted on the rapid service provision and reliability of the instance-based rather than the existing IP-based structure. Research is mainly conducted through Block cloud, a platform that combines service-centric networking (SCN) and blockchain. In addition, the Internet of Things network has been proposed as a fog computing environment in the structure of the existing cloud computing. Fog computing is an environment suitable for real-time information processing. In this paper, we propose a new Internet network structure based on fog computing that requires real-time for rapid processing of IoT services. The proposed system applies IoTA, the third-generation blockchain based on DAG, to the block cloud. In addition, we want to propose a basic model of the object block chain and check the application services of electric vehicles.