• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.3
• /
• pp.68-76
• /
• 2000

The stabilization control of Inverted Pendulum(IP) system is difficult because of its nonlinearity and structural unstability. Futhermore, a series of conventional techniques such as the pole placement and the optimal control based on the local linearizations have narrow stabilizable regions. At the same time, the fine tunings of their gain parameters are also troublesome. Thus, in this paper, an Evolving Neural Network Controller(ENNC) which its structure and its connection weights are optimized simultaneously by Real Variable Elitist Genetic Algorithm(RVEGA) was presented for stabilization of an IP system with nonlinearity. This proposed ENNC was described by a simple genetic chromosome. And the deletion of neuron, the according to the various flag types. Therefore, the connection weights, its structure and the neuron types in the given ENNC can be optimized by the proposed evolution strategy. And the proposed ENNC was implemented successfully on the ADA-2310 data acquisition board and the 80586 microprocessor in order to stabilize the IP system. Through the simulation and experimental results, we showed that the finally acquired optimal ENNC was very useful in the stabilization control of IP system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.3
• /
• pp.261-266
• /
• 2004

Recently, a variety of intelligent robots are developed for the personal purpose beyond the industrial application. These intelligent robots have ranges of sensors, actuators, and control algorithms to their application. In this paper we propose a reconfigurable robot controller, $SR^2$c (The SOPC-based Reconfigurable Robot Controller), based on SOPC (System on a Programmable Chip), that can be reconfigurable easily by software. The proposed robot controller contains not only a processing module but also robot-specific IP's. To show a feasibility of the proposed robot controller, a small entertainment robot, Wizard-4 is implemented with a single chip controller as proposed in this paper.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.4 s.310
• /
• pp.35-44
• /
• 2006

The network induced transmission delay deteriorates the performance and stability of the real-time distributed control system on LonWorks over IP (LonWorks/IP) virtual device network (VDN). LonWorks/IP virtual device network is an integrated form of LonWorks device network and IP data network. The time delay in servo control on the LonWorks/IP-based VDN has highly stochastic nature. In the real-time distributed servo applications for predictive maintenance on the factory floor, timely response is essential.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.11
• /
• pp.1707-1712
• /
• 2013

In this paper, we implement a hardware for motor control based on FPGA + embedded processor using Zynq EPP which is All Programmable SoC in order to improve a structural problem of motion control based on such as DSP, MCU and FPGA previously. The implemented motor controller that is fused controller with advantage of FPGA and embedded processor. The signal processing part of high velocity motor control is performed by motor controller based on FPGA. A motion profile and kinematic calculation that are required algorithm process such as operation of a complicate decimal point has processed in an embedded processor based on dual core. As a result of a hardware implementation, it has an advantage that has can be realized an effect of distribution process in one chip. It has also an advantage that is able to organize as a multi-axis motor controller through adding the IP core of motor control implemented on FPGA.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.61-62
• /
• 2015

This study presents a movable USV (Unmanned Surface Vehicle) based on Micro Controller. Recently, Micro Controller has widely used in application programming such as industry and education application. In particular, Robot is capable of collecting Marine Debris in any sea area is needed so We propose USV used IP camera for automatic driving, distance detection to control movement of USV in order to prevent of collision based on Arduino. Also, Surrounding situation taken by IP camera can be transmitted to monitor and smartphone.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.233-234
• /
• 2011

본 논문에서는 IPMSM의 약자속 제어 영역에서 토크제어를 하기위한 전류제어기를 PI-IP 혼합제어기로 구성하였다. 약자속 제어 영역에서 토크제어 시 d축과 q축의 인덕턴스 차이로 인해 전류제어 응답의 차이가 발생하여 전압여유분 확보에 문제점이 발생한다. 이러한 문제점을 개선하고자 PI-IP 혼합제어기를 적용하여 약자속 영역에서의 d축과 q축의 전류 제어기의 응답특성을 달리하여 토크제어 시 과도상태에서 발생하는 문제점을 개선하였다.

• Journal of Navigation and Port Research
• /
• v.44 no.2
• /
• pp.136-143
• /
• 2020

Maritime autonomous surface ships (MASS) has been developed over the years. But, there are many unresolved problems. To overcome these problems, this study proposes connected ship navigation system. The system comprises a slave ship and a master ship that leads the slave ship. To implement this system, communication network, route planning algorithms, and controllers are designed. The communication network is built using the transmission control protocol/Internet protocol (TCP/IP) socket communication method to exchange data between ships. The route planning algorithms calculate the course and distance of the slave ship using the middle latitude sailing method. Nomoto model is used as the mathematical model of the slave ship maneuvering motion. Then, the autoregressive with exogenous variables (ARX) model is used to estimate the parameters of Nomoto model. Based on the above model, the automatic steering controller is designed using a proportional-derivative (PD) control. Also, the speed controller is designed for the slave ship to maintain constant distance from the master ship. Sea experiments are conducted to verify the proposed system with two remodeled boats.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.1-6
• /
• 2010

We can see the motion blur phenomenon on theedge of the moving picture when it moves in the LCDs. To reduce this phenomenon, we suggested a new over-deriving method, implemented on the board XUP Virtex-2 Pro Development System by using Virtex-2 Pro XUP XC2VP30 and improved the Motion Blur. In this method, we did not use additional parts except for a SDRAM. Hardware implementation for IP and data interface were handled in software. In this paper, we used the moving bar and the moving video image as a design model. We also showed that the afterimage was reduced and the vivid moving images was displayed. through this method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.13-19
• /
• 2019

SDN is one of the most actively researched topics to solve traffic problems in communication. SDN implements multiple networks in a single physical network by virtualizing network resources through an advanced API. Network Function Virtualized (NFV) distributes network functions from hardware using software instant, virtualization technology to VNF. These features make network management easier and improve performance by virtualizing IP, routers, and so on. In this paper, we propose a method to control the traffic and provide the distributed controller effect of SDN through SDN distribution in the virtualized industrial network. It is expected that SDN distribution will be able to manage traffic more efficiently when using the proposed scheme.

• Journal of the Korea Convergence Society
• /
• v.12 no.7
• /
• pp.1-6
• /
• 2021

Currently, virus infection such as Corona 19 has become commonplace, and interest in unmanned systems is increasing in the field for non-face-to-face ICT services. In this paper, the function and performance of remotely successfully controlling a store through video and audio using an IP PBX with a broadcasting function was verified through a test. And the fully unmanned system is not gaining credibility due to various technical problems, however the central control system is a very efficient and reliable system because the controller can directly control the customer while monitoring the access and the inside of the store through the video and audio. In the future, we plan to study a completely unmanned remote control system using A.I technology.