• 전자공학회논문지 IE
• /
• v.47 no.1
• /
• pp.34-40
• /
• 2010

Even if use ICS repeater in radio communication system, distance between Donor antenna and Service antenna though do much isolation degree must that shortcoming have. Proposed IP antenna to supplement this shortcoming in this paper. Result Doner antenna and isolation of Service antenna that measure through examination do 1.5m and when did direction 180 degree, Isolation confirmed that is measured 110dB. Confirmed that can unuse ICS repeater through this result and service by general RF repeater.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2301-2306
• /
• 2011

Current general-purpose electromagnetic field simulators have been widespread applied, and is being used to electromagnetic problems such as antenna design, EMC design, measurement, and microwave device design, etc. This paper is to solve various electromagnetic problems in X-band region for utilizing multi-core-based PC available network resources more efficiently. The electromagnetic field simulator based on TCP / IP-based network topology, configuration, and its framework design is proposed and its availability is examined.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.63-65
• /
• 2011

Current general-purpose electromagnetic field simulator has been widespread and is being used to antenna design, EMC design, measurement, and microwave device design, etc. This paper is to solve various electromagnetic problems of X-band region for the purpose multi-core-based PC utilizing network resources more efficiently, and then the electromagnetic field simulator based on TCP / IP-based network topology, configuration, and its framework design is proposed.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.44-48
• /
• 2002

This paper describes an adaptive signal processing of digital receiver with DDC(Digital Down Convertor), DDC is implemented by using NCO(Numerically Controlled Oscillator), digital low pass filter. for the passband sampling, we present the results of digital receiver simulation with DDC. We confirm that the low IP signal is converted to zero IF by DDC. DOA(Direction Of Arrival) estimation technique using MUSIC(Multiple SIgnal Classification) algorithm with high resolution is presented. We Cow that an accurate resolution of DOA depends on the input sampling number.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.16-26
• /
• 2006

GNSS is a satellite-based radio navigation aid. For using it in civil air navigation area, any GNSS service should meet the requirements of accuracy, integrity, continuity and availability in each flight phase established by ICAO. In this study, a remote integrity monitoring system(RIMS) for GNSS are proposed and explained to utilize it in the design of GNSS augmentation system such as GBAS and GRAS. The RIMS consists of signal-in-space receiving subsystem and signal processing subsystem. Each GPS receiver is connected to Host PC by the serial to ethernet converting device which is able to convert serial port connection to LAN port connection in order to exchange information via the internet. We can overcome the siting limitation of GPS receiver and antenna, and reduce signal loses in the cable between GPS antenna and receiver. This system is providing the development environment for GBAS CAT-I system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.17-24
• /
• 2005

Traditional Internet applications such as FIP and E-mail are increasingly sharing bandwidth with newer, more demanding applications such as Web browsing, IP telephony, video conference and online games. These new applications require Quality of Service (QoS), in terms of delay, loss and throughput that are different from QoS requirements of traditional applications. Unfortunately, current Active Queue Management (AQM) approaches offer monolithic best-effort service to all Internet applications regardless of the current QoS requirements. This paper proposes and evaluates a new AQM technique, called MCDT that provides dynamic and separated buffer threshold for each Applications, those are FTP and e-mail on TCP traffic, streaming services on tagged UDP traffic, and the other services on untagged UDP traffic. Using a new QoS metric, our simulations demonstrate that MCDT yields higher QoS in terms of the delay variation and a packet loss than RED when there are heavy UDP traffics that include streaming applications and data applications. MCDT fits the current best-effort Internet environment without high complexity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.139-139
• /
• 2013

본 발표에서는 3차원 안테나 유도 방식(3DAI)의 대기압 플라즈마 발생기술을 소개하고 그 응용에 대해 논의하고자 한다. 3DAI (3 Dimensional Antenna Induced) 방식의 가장 큰 특징은 하나의 전원 장치로 아크 발생 없이 다수의 금속 전극에서 플라즈마를 발생 할 수 있다는 특징과 3차원과 같은 높이 100 mm 이상의 큰 volume에서 플라즈마를 발생할 수 있는 기술로 그 적용을 확대할 수 있을 것으로 기대되는 기술이다. 다수의 금속 전극에서 플라즈마를 발생 시키는 기술은 대면적 처리가 가능하다는 의미이며 금속 전극을 사용한다는 것은 반 영구적 전극 사용을 할 수 있다는 의미로 해석할 수 있다. 본 연구에서는 신발 접착에 필요한 플라즈마 처리면적 350 mm, 플라즈마 발생 높이 100 mm급 3DAI 대기압 플라즈마 발생 장치를 개발하였다. 개발된 3DAI 플라즈마 기술을 이용하여 신발 재료 접착에 적용하였다. 화학 약품인 프라이머를 사용하지 않고 수성접착제를 사용하여 밑창인 고무와 중창인 IP 및 PU 등에서 모두 초기 접착 강도 1.5 kg/cm 이상, 경시 접착강도 3.5 kg/cm 이상으로 모재가 대부분 파괴되는 접착 강도를 얻었으며, 접착 수율이 99.9% 이상의 높은 생산성을 보여주고 있다.

• ETRI Journal
• /
• v.36 no.3
• /
• pp.352-360
• /
• 2014

This paper presents a 900 MHz zero-IF RF transceiver for IEEE 802.15.4g Smart Utility Networks OFDM systems. The proposed RF transceiver comprises an RF front end, a Tx baseband analog circuit, an Rx baseband analog circuit, and a ${\Delta}{\Sigma}$ fractional-N frequency synthesizer. In the RF front end, re-use of a matching network reduces the chip size of the RF transceiver. Since a T/Rx switch is implemented only at the input of the low noise amplifier, the driver amplifier can deliver its output power to an antenna without any signal loss; thus, leading to a low dc power consumption. The proposed current-driven passive mixer in Rx and voltage-mode passive mixer in Tx can mitigate the IQ crosstalk problem, while maintaining 50% duty-cycle in local oscillator clocks. The overall Rx-baseband circuits can provide a voltage gain of 70 dB with a 1 dB gain control step. The proposed RF transceiver is implemented in a $0.18{\mu}$ CMOS technology and consumes 37 mA in Tx mode and 38 mA in Rx mode from a 1.8 V supply voltage. The fabricated chip shows a Tx average power of -2 dBm, a sensitivity level of -103 dBm at 100 Kbps with PER < 1%, an Rx input $P_{1dB}$ of -11 dBm, and an Rx input IP3 of -2.3 dBm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2B
• /
• pp.263-268
• /
• 2010

This paper shows the key management system in a small metallic cabinet using a small UHF RFID tags. Each key chain with a key has a custom-designed small RFID tag antenna. There are 6 metallic racks in the small cabinet, and each rack can hold 60 key chains. Therefore, the small cabinet can hold 360 key chains with tags. The 360 key chains with RFID tags in a cabinet are recognized by RFID key chain management system. Even though it is hard to recognize 360 tags in the a cabinet, this RFID key management system with small custom designed RFID tags can recognize all the tags in the small cabinet. To read the all the tags, the locations of antennas and tag shapes are optimized. The reading rates based on the bios-version of the reader and the locations of the reader antennas are compared.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.5-17
• /
• 2000

cdma2000 offers several enhancement as compared to TIA/EIA-95, although it remains fully compatible with TIA/EIA-95 systems and allows for a smooth migration from one to the other-Major new capability include:1)connectivity to GSM-MAP in addition to IP and IS-41 networks; 2) new layering with new LAC and MAC architectures for improved service multiplexing and QoS management and efficient use of radio resource ;3) new bands and band widths of operation in support of various operator need and constraints, as well as desire for a smooth and progressive migration to cdma 2000; and 4) flexible channel structure in support of multiple services with various QoS and variable transmission rates at up to 1 Mbps per channel and 2 Mbps per user. Given the phenomenal success of wireless services and desire for higher rate wireless services. improved spectrum efficiency was a major design goal in the elaboration of cdma2000. Major capacity enhancing features include; 1) turbo coding for data transmission: 2)fast forward link power control :3) forward link transmit diversity; 4) support of directive antenna transmission techniques; 5) coherent reverse link structure; and 6) enhanced access channel operation. As users increasingly rely on their cell phone at work and at home for voice and data exchange, the stand-by time and operation-time are essential parameters that can influence customer's satisfaction and service utilization. Another major goal of cdma2000 was therefore to enable manufacturers to further optimize power utilization in the terminal. Major battery life enhancing features include; 1) improved reverse link performance (i.e., reduced transmit power per information bit; 2) new common channel structure and operation ;3) quick paging channel operation; 4) reverse link gated transmission ; and 5) new MAC stated for efficient and ubiquitous idle time idle time operation. this article provides additional details on those enhancements. The intent is not to duplicate the detailed cdma2000 radio access network specification, but rather to provide some background on the new features of cdma2000 and on the qualitative improvements as compared to the TIA/EIA-95 based systems. The article is focused on the physical layer structure and associated procedures. It therefore does not cover the MAC, LAC, radio resource management [1], or any other signaling protocols in any detail. We assume some familiarity with the basic CDMA concepts used in TIA/EIA-95.