• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.666-671
• /
• 2000

With the current advances in optical WDM (Wavelength Division Multiplexing) networking technologies and the increasing demand for network bandwidth the Next Generation Internet is expected to be a network that runs IP(Internet Protocol) directly over WDM-based optical networks. The network control architecture for the IP over WDM networks is different from that of traditional Internet since the underlying WDM devices have more constraints than electronic IP routers such as the lack of optical buffers and wavelength continuity property etc. In this paper we introduce several architectural models for implementing IP over WDM networks and propose an integrated network control framework for the IP over WDM networks. This framework leverages the traffic engineering control architecture for the MPLS (Multi-Protocol Label Switching) networks and is mainly developed for the IP over packet-switched WDM networks. We also report several preliminary simulation results of contention resolution schemes in the packet-switched WDM networks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.5
• /
• pp.378-383
• /
• 2005

Traffic engineering is a technology that guarantees quality of service that users want and maximize inflection degree of network resources at the same time as evenly distributing traffic to whole network. To improve performance of network at traffic and resources level, traffic engineering aims at utilizing network resource efficiently and effectively and must be satisfied performance requirement concerned with traffic. In this paper, two models to embody traffic engineering are analyzed and finally functional structure of IP/WDM traffic engineering is explained.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1257-1262
• /
• 2001

In recent years there has been a lot of interest in carrying IP over WDM networks in an efficient manner. The benefits here include larger bandwidth capacities, better network scalability, and more efficient operation. W based approach, termed "lambda-labeling" is presented for direct If over WDM integration. In this paper, we study on architecture approach method consider of optical Internet evolution that based on MPLamdaS conception of IETF. Label stack conception collect electronic LSP of optical LSP. This paper is proposed method of co-operation between MPLS domain and MPLambdaS domain. Additionally, proposed architecture of Edge Optical LSR.tical LSR.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.394-401
• /
• 2007

High speed all optical network is a viable option to satisfy the exponential growth of internet usage in the recent years. Optical networks offer very high bit rates and, by employing technologies like internet protocol over wavelength division multiplexing(IP-over-WDM), these high bit rates can be effectively utilized. However, failure of a network component, carrying such high speed data traffic can result in enormous loss of data in a few seconds and persistence of a failure can severely degrade the performance of the entire network. Designing IP-over-WDM networks, which can withstand failures, has been subject of considerable interest in the research community recently. Most of the research is focused on the failure of optical links in the network. This paper addresses the problem of designing IP-over-WDM networks that do not suffer service degradation in case of a single link failure. The paper proposes an approach based on the framework provided by a recent paper by M. Kurant and P. Thiran. The proposed approach can be used to design large survivable IP-over-WDM networks.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.8
• /
• pp.19-29
• /
• 2001

The recent explosion in the Internet applications, Internet. host number and the traffic in the IP backbone network is posing new challenges for transport network. This requires a high-speed IP backbone network that has a substantially higher bandwidth than the one offered by current networks, which prompts the development of all-optical network. To obtain optical network utilization gains, we need a software which establishs logical topology to make possible the efficient use or physical topology, and control the optical network in combination with the IP layer routing protocols. Finally, the logical topology is required higher efficient than physical topology. For this an efficient algorithm for the routing and wavelength assignment(RWA) in the WDM all-optical network is necessary. In this paper, two kinds of heuristic algorithms to establish logical topology for WDM networks and arc applied to the design of logical topology of domestic backbone network. These algorithms are found to work quite well and they arc compared with each other in terms of blocking rate, etc.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2711-2733
• /
• 2018

Minimizing power consumption in bandwidth limited optical traffic grooming networks is presented as a two-objective optimization problem. Since the main objective is to route a connection, the network throughput is maximized first, and then the minimum power consumption solution is found for this maximized throughput. Both transparent IP over WDM (Tp-IPoWDM) and translucent IP over WDM (Tl-IPoWDM) network may be applied to examine such bi-objective algorithms. Simulations show that the bi-objective algorithms are more energy-efficient than the single objective algorithms where only the throughput is optimized. For a Tp-IPoWDM network, both link based ILP (LB-ILP) and path based ILP (PB-ILP) methods are formulated and solved. Simulation results show that PB-ILP can save more power than LB-ILP because PB-ILP has more path selections when lightpath lengths are limited. For a Tl-IPoWDM network, only PB-ILP is formulated and we show that the Tl-IPoWDM network consumes less energy than the Tp-IPoWDM network, especially under a sparse network topology. For both kinds of networks, it is shown that network energy efficiency can be improved by over-provisioning wavelengths, which gives the network more path choices.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.107-108
• /
• 2006

In order to meet the customers'emerging demands for more bandwidth and diverse IP multimedia applications including high definition(HD) video streaming service, KT presents innovative FTTP solution using WDM-PON system. FTTP comprises an OLT inside the central office, a fiber optic distribution network including a passive remote node in the outside plant, and ONU installed on the pole or wall of customers premise. The passive remote node is located in a manhole near the subscribers and does not require any electrical power supply. And finally, UTP cable is connected from ONU to subscribers'IP appliances like PC or HGW or IP-STB. KT finished its FTTP trial service in 2004 and commercial deployment has begun since 2005. With this FTTP solution, each subscriber can enjoy high-speed internet service with speeds of up to symmetric 100 Mbit/s and various IP media applications including HD quality IP video streaming service and high quality video phone service.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.4
• /
• pp.148-152
• /
• 2007

This paper develops an integrated optic transmitter/receiver based on ring-type WDM PON. The optic transmitter/receiver can transmit real-time images from the CCTV of a remote street without compression and transmit TCP/IP data using an optic fiber. This system can also perform remote controls of the CCTV camera. The developed optic transmitter/receiver can provide the monitoring service of an advanced image quality of remote traffic using a broadband technology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.4
• /
• pp.370-379
• /
• 2014

Recently, the interest in optical network with multifiber link is continuing to rise since the network traffic has been growing exponentially. However, growing traffic in network leads to increasing the energy consumption of the network equipment. In this paper, we propose a dynamic routing and wavelength assignment (RWA) algorithm based on V-like cost function and layered graph to improve energy efficiency in IP over WDM network with multifiber link. The V-like cost function is used to decide the fiber cost according to the number of used wavelengths. The layered graph with multifiber link is used to select the energy efficient route and wavelength. The proposed RWA algorithm is compared and analyzed with conventional algorithm in view of average power consumption and blocking probability through OPNET modeler.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5140-5147
• /
• 2013

This paper presents a new idea of structural design of the optical access network for IPOW(IP over WDM) services. More efficient network can be constructed, because the IP packets are transmitted directly to the WDM without going through an intermediate layer of networks. The wavelength Routing is based on a label switching technology. The ability to transmission of high volume traffics and QoS capability of the optical label switching directly to the end user of the IPOW optical internet networks is provided. As in AON(Active Optical Network) flexible bandwidth on demand subscribers is allocated. By the Simulation of the proposed optical access networks to measure the BER(Bits Error Ratio) at the end of the nodes the network characteristics are analyzed. These results are based on the design of efficient optical network.