• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.1005-1012
• /
• 1995

This paper proposes a new approach for modeling sweep surfaces. The overall modeling procedure consists of following steps : (1)remeshing the section curves based on the curve lengths ; (2)remeshing the guide curve and the boundary curves based on a given sweeping rule ; (3)obtaining intermediate section curves at the remeshed points of the guide curve by blending the initial section curves ; (4)compensation of the intermediate section curves ; (5)interpolating the initial and intermediate curves using Hermite interpolant. The resulting sweep surface is expressed in a G$^{2}$ bicubic parametric spline surface.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.303-308
• /
• 1992

In this study, we propose a shared storage system which is more efficient policy than MIS(Mixed Intermediate Storage) policy for relatively rare storage system and can be called CIS(Common Intermediate Storage) policy. Using this strategy, we develop a new completion time algorithm and apply it to two kinds of optimal or near optimal scheduling method; combinatorial search and simulated annealing method. We also extend this strategy to other storage policy, for example MIS policy, with PLC(Programmable Logic Controller) logic and on/off action of electronic valves. It thus can be accepted as a basic form of FMS(Flexible Manufacturing System) for operating various storage policies. Finally we suggest the interlocking block to compansate for the shortcoming of CIS policy, i.e, complication of operation and safety, resulting in a basic batch process automation mode.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.1
• /
• pp.60-64
• /
• 1990

The reactions of alkanesulfonyl chlorides with pyridines in the presence of various solvents have been studied by means of kinetic method. Alkanesulfonyl chlorides bearing ${\alpha}$-hydrogen with the normal attack of pyridine is found to be at the ${\alpha}$-hydrogen with elimination to form the sulfene intermediate evidently. From the mass spectra by the reaction of ethanesulfonyl chloride with 3-picoline in the presence of methanol-$d_1$, it has shown that the reaction has a witness favorable to the slulfene intermediate.

• Animal cells and systems
• /
• v.7 no.2
• /
• pp.151-157
• /
• 2003

Calretinin is thought to play roles in calcium buttering. Its site of expression has been extensively studied in the central nervous system. We previously reported (Hong et at.,2002, Neurosci. Res.,44: 325-335) calretinin expression in the superficial layers of the cat superior colliculus (SC). In the present study, we studied the distribution of calretinin in the intermediate and deep layers by immunocytochemistry. We found striking differences in calretinin immunoreactivity among the superficial, intermediate, and deep layers. In contrast to the superficial layers, the intermediate and deep layers contained many calretinin-immunoreactive (IR) neurons. They formed two laminar tiers. The first tier, which was very distinctive, was found within the upper intermediate gray layers and formed clusters of labeled neurons in many sections. The second tier of calretinin-IR neurons was found in the deep gray layer. However, the second tier was not distinctive compared to the first tier and the labeled neurons did not form any clusters. Calretinin-IR neurons in the intermediate and deep layers varied dramatically in morphology and included vortical fusiform, pyriform, and stellate neurons. Neurons with varicose dendrites were also labeled. Most of the labeled neurons were small to medium in size. Enucleation appeared to have no effect on the distribution of calretinin immunoreactivity in the contralateral intermediate and deep layers of the SC. The results indicate that calretinin is present in various neurons, at different locations. These results should be applicable for better understanding of the functional organization of the SC.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06c
• /
• pp.505-509
• /
• 2007

Static Single Assignment (SSA) form is an intermediate representation which encodes information about data and control flow that is use used to facilitate program analysis and optimization. SSA form simplifies this process with its size linear to program size. Thus we use SSA form to efficiently facilitate bytecode level analysis and optimizations in our CTOC program processor project. In this paper, we illustrate the application and implement implementation of SSA form using an example. We give the conclusion after experimental results.

• Journal of the Korean Ceramic Society
• /
• v.38 no.10
• /
• pp.881-885
• /
• 2001

Kinetics and mechanisms of intermediate phases formation in $Ba(Mg_{1/3}Ta_{2/3})O_3$, obtained by a solid state reaction were studied. $Ba{Ta_2}{O_6}$ and ${Ba_4}{Ta_2}{O_9}$ as intermediate products were first formed at $700^{\circ}C$. $Ba(Mg_{1/3}Ta_{2/3})O_3$ was appeared at $800^{\circ}C$. Several reactions take place on heating process. $Ba{Ta_2}{O_6}$ is found at the first stage of the reaction, and then $Ba{Ta_2}{O_6}$ or ${Ba_4}{Ta_2}{O_9}$ react with MgO to form $Ba(Mg_{1/3}Ta_{2/3})O_3$. The reaction of $Ba(Mg_{1/3}Ta_{2/3})O_3$ formation does not complete until fired at $1350^{\circ}C$ for 60 min. The kinetics of solid-state reaction between powdered reactants was controlled by diffusion mechanism, and can be explained by the Jander's model for three-dimensional diffusion.

• Nuclear Engineering and Technology
• /
• v.41 no.10
• /
• pp.1323-1332
• /
• 2009

The IHX (Intermediate Heat eXchanger) for a pool-type SFR (Sodium-cooled Fast Reactor) system transfers heat from the primary high temperature sodium to the intermediate cold temperature sodium. The upper structure of the IHX is a coaxial structure designed to form a flow path for both the secondary high temperature and low temperature sodium. The coaxial structure of the IHX consists of a central downcomer and riser for the incoming and outgoing intermediate sodium, respectively. The IHX of a pool-type SFR is supported at the upper surface of the reactor head with an IHX support structure that connects the IHX riser cylinder to the reactor head. The reactor head is generally maintained at the low temperature regime, but the riser cylinder is exposed in the elevated temperature region. The resultant complicated temperature distribution of the co-axial structure including the IHX support structure may induce a severe thermal stress distribution. In this study, the structural feasibility of the current upper support structure concept is investigated through a preliminary stress analysis and an alternative design concept to accommodate the IHTS (Intermediate Heat Transport System) piping expansion loads and severe thermal stress is proposed. Through the structural analysis it is found that the alternative design concept is effective in reducing the thermal stress and acquiring structural integrity.

• Tribology and Lubricants
• /
• v.37 no.2
• /
• pp.62-70
• /
• 2021

The problem with intermetallics coating using the heat of molten casting is that the heat generated during combustion synthesis dissolves the coating and the substrate metal. This study investigates whether pre-annealing before synthesis can control the reaction heat, with the aim of Ni₃Al coating on the casting surface. Therefore, the effects of the annealing temperature and time on the combustion synthesis behavior of the powder compact of Ni-25at%Al after annealing were investigated. As results, the reaction heat when synthesized decreased as the annealing temperature was high and the annealing time was longer. This was attributed to the fact that Al was diffused to Ni particles during low temperature annealing and intermediate Ni-Al compounds were formed during high temperature annealing. After combustion synthesis, however, it was found that their microstructures were almost identical except for the amount of intermediate intermetallics. Furthermore, an annealing temperature above 450℃, at which intermediate compounds begin to form, is needed to prevent the dissolving problem during synthesizing. The intermetallics synthesized after annealing at higher temperature and prolonger annealing time showed a good wear resistance. This might be because much intermediate intermetallics of high hardness were remained in the microstructure.

• The KIPS Transactions:PartD
• /
• v.14D no.2
• /
• pp.217-224
• /
• 2007

In order to determine the value and type statically. CTOC uses the SSA Form which separates the variable according to assignment. The SSA Form is widely being used as the intermediate expression of the compiler for data flow analysis as well as code optimization. However, the conventional SSA Form is more associated with variables rather than expressions. Accordingly, the redundant expressions are eliminated to optimize expressions of the SSA From. This paper defines the partial redundant expression to obtain a more optimized code and also implements the technique for eliminating such expressions.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.3
• /
• pp.228-240
• /
• 2012

Morphing is a geometric interpolation technique that is often used by the animation industry to transform one form into another seemingly seamlessly. It does this by producing a large number of 'intermediate' forms between the two 'extreme' or 'parent' forms. It has already been shown that morphing technique can be a powerful tool for form design and as such can be a useful addition to the armoury of product designers. Morphing procedure itself is simple and consists of straightforward linear interpolation. However, establishing the correspondence between vertices of the parent models is one of the most difficult and important tasks during a morphing process. This paper discusses the mesh-merging method employed for this process as against the already established mesh-regularising method. It has been found that the merging method minimises the need for manual manipulation, allowing automation to a large extent.