• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.19-27
• /
• 2017

In spite of adoption of Intact Stability Code Part A as mandatory, the accidents have been occurred frequently caused by dynamic stability. Therefore International Maritime Organization (IMO) is revising the Intact Stability Code to prevent the cause of accidents. The result of 4th meeting of Sub-committee on Ship Design and Construction (SDC), five mode of the cause was defined and establishing each draft regulations. We consider physical background, mathematical description, draft regulations for five failure mode and sample calculations for ships built by STX Offshore & Shipbuilding.

• Ocean Systems Engineering
• /
• 제4권2호
• /
• pp.117-136
• /
• 2014

The increased interest in the design of energy efficient ships post IMO regulation on enforcing EEDI has encouraged researchers to reevaluate the numerical methods in predicting important hull design parameters. The prediction of added resistance and stability of ships in the rough sea environment dictates selection of ship hulls. A 3D panel method based on Green function is developed for vessel motion prediction. The effects of parametric instability are also investigated using the Volterra series approach to model the hydrostatic variation due to ship motions. The added resistance is calculated using the near field pressure integration method.

• 수산해양교육연구
• /
• 제5권1호
• /
• pp.15-22
• /
• 1993

The Maritime Traffic Safety Law of P. R. China has not the legal nature of navigation rule which regulates the vessel traffic directly but has the legal nature of management to ensure the safety and good order of the whale marine traffic. For that reason, the legal status of this Law is a general basic norm for the marine safety regulations rather than a definite enforcement regulation. This Law does not have any clear statements on adaptation of the steering and sailing rules of the International Regulations for Preventing Collisions at Sea, but it can be presumed the Convention would be applied on the viewpoint of the international practice. The subject matter of this Law is easily understandable, because the IMO and shipping countries have already made similar legislation. Since the maritime traffic condition of the P. R. China also has a direct effect upon the Korean coastal waters, it is essential to observe closely the process of enforcement and development of the P. R. China's Maritime Traffic Safety Law.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.577-587
• /
• 2017

The recent IMO MEPC regulation on EEDI, EEOI and increased fuel cost has worsened the financial condition of the small and medium sized passenger ferry companies, and it is situated to acquire the economic ships with a pretty high resistance performance. The purpose of this research is to develop a design method on the efficient gooseneck bulb for the middle-sized passenger ferry operated in the Far East Asian seas. The hull forms are designed by varying the gooseneck bulb parameters to find the changes on the resistance performance according to the shape of bulb. The numerical series tests are made to derive the regression equation for estimating the resistance through analyzing the data statistically. This equation is set as an objective function, and then using the optimization algorithm searches for the optimal combination of the design variables. After a hull form is designed corresponding to optimized parameters.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2011년도 춘계학술대회
• /
• pp.87-88
• /
• 2011

다기능 선박조종시뮬레이터(Full-mission Shiphandling Simulator)를 이용한 사고분석 방법을 한국해양수산연수원이 보유한 DNV(Det Norske Veritas)선급에서 "Integrated Simulator System, NAUT AW(SIM), DYNPOS-AUT(SIM), HSC, TUG, ICE" Class로 인정하고, STCW 협약 Regulation I/12를 충족한 Russia TRANSAS사의 "NAVI-TRAINER PROFESSIONAL 5000 NTPRO 5000" Full-mission Shiphandling Simulator를 이용하여 시행하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권2호
• /
• pp.248-255
• /
• 2002

Miller cycle was studied and analyzed by engine performance simulation to achieve very low fuel consumption and to meet the IMO NOx regulation on a medium speed diesel engine. Based on the performance simulation results the intake valve closing time for HYUNDAI HiMSEN 6H21/32 engine was set at 0deg.ABDC(After Bottom Dead Center). Also, the simulation results indicated that significant NOx reduction could be achieved with low reduction of fuel consumption. The performance simulation investigated the effect of compression ratio and turbocharger on fuel consumption and NOx concentration in combination with Miller cycle. The results indicated a significant reduction of fuel consumption with keeping NOx concentration. The results of performance simulation were compared with measured data to verify simulation results. The comparison showed the maximum error was 2.34% in exhaust temperature. Also, the experimental result showed that improvement in BSFC(Brake Specific Fuel Consumption) was 5.8g/kwh with keeping NOx level similar to simulation result.

• 동력기계공학회지
• /
• 제18권4호
• /
• pp.11-16
• /
• 2014

Although smoke emitted from ships is not included in IMO(International Maritime Organiztion) regulation yet, it is one of the substance what is polluting mainly the air. Especially, its concentration is very high when an engine is started and a load is rapidly changed. This is caused by unburned fuel what is injected more than necessary quantity after combustion period. It is possible to decrease smoke concentration emitted at starting engine by controlling fuel injection quantity, but it is concerned that time to rated speed must be spent. Then a governor what can reduce the smoke concentration without a loss of time to rated speed is needed. We adopted a electro-hydraulic governor what can control dual fuel start limit function and achieved very low level of smoke concentration without greater the loss of time to rated speed.

• 한국항해항만학회지
• /
• 제43권2호
• /
• pp.86-92
• /
• 2019

IMO has enacted a convention that air pollution due to emissions of ships and sulfur oxides emissions should be significantly reduced by 2020. Based on the current support policies, this work intended to draw up the government support plans required by the shipping companies. Analytic Hierarchy Process analysis was done with factors derived from brainstorming and literature studies. The analysis results showed that the cost factor was generally the most important criterion and the Financial Aid was relatively more important within this cost factor. The policy implications for the regulation of sulfur oxides emissions was provided.

• 한국해양환경ㆍ에너지학회지
• /
• 제16권4호
• /
• pp.248-254
• /
• 2013

IMO가 도입한 Energy Efficiency Design Index (EEDI)의 강제로 최근 관심이 증가되고 있는 상반회전 프로펠러(Contra-Rotating Propeller, CRP)의 단독 상태에서의 성능평가를 위한 보오텍스격자법(Vortex Lattice Method) 기반의 포텐셜 수치해법과 모형시험법을 확립하고 이를 특정 CRP에 적용하여 유용성을 검증하였다. 대상 CRP는 EEDI 개선을 목적으로 설계된 것으로 그 성능을 본 연구의 수치 및 실험 해석을 바탕으로 분석하였다. CRP의 설계점을 포함한 주 작동 영역에 대해 계산과 실험이 좋은 일치를 보임을 확인하였고, 본 연구를 통하여 제안된 기법은 향후 CRP 설계 및 성능해석에 유용하게 사용될 수 있으리라 생각된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권1호
• /
• pp.19-27
• /
• 2015

최근에 국제해사기구(IMO)에서 선박 평형수 처리장치(Ballast water treatment system, BWTS)와 관련된 국제 규정을 강화함에 따라 이에 대응할 수 있는 BWTS 기술개발의 중요성이 대두되고 있다. 지금까지는 세계 각국에서 선박 평형수 처리기술을 처리방식에 따라 크게 물리적 방식(막분리, 원심분리, 자외선 등)과 화학적 처리방식(염소처리, 오존처리, 화확약품 등)으로 개발하여 왔으나, 기존의 기술 방식들은 추가적인 구동전력, 낮은 생산성, 잔류처리 문제 등으로 기술적인 보완이나 대안이 요구되고 있다. 본 연구에서는 기존과는 다른 새로운 방식의 기계식 방식 평형수 처리장치의 설계를 위한 유동해석 연구이다. 고속 회전하는 몇 가지 디스크 형상에 따라 유동에서 발생하는 여러 가지 유동특성을 전산유체해석(CFD)를 통하여 분석하였다. 평판형 및 계단형 형상에서는 반경을 따라서 국부적으로 공동현상이 발생가능하며, 원주형에서는 전단응력 강도를 높일 수 있었다.