• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권6호
• /
• pp.323-332
• /
• 2003

This paper proposes a variable structure position controller for an induction motor(IM) which uses a reaching law and an integral compensating nonlinear switching function. With the integral compensating nonlinear switching function, both very low overshoot and high steady state control accuracy can be obtained by compensating the states chattering problem due to the unmodelled dynamics of inverter and feedback sensors. With the reaching law, reaching mode can be established quantitatively during transient state so that dynamic control performance is improved. For experiment a digital servo driver which consists of a DSP and an IPM inverter was developed. With the various experimental results, IM position control performance was verified.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.205-209
• /
• 1999

This paper proposes a variable structure position controller for an induction motor(IM) which uses a reaching law and an integral compensating nonlinear switching function. With the reaching law, reaching mode can be established quantitatively during transient state so that dynamic control performance is improved. With the integral compensating nonlinear switching function, both very low overshoot and high steady state control accuracy can be obtained by compensating the states chattering problem due to the unmodelled dynamics of inverter and feedback sensors. For experiment a digital servo driver which consists of a DSP and an IPM inverter was developed. With the various experimental results, IM position control performance was verified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2132-2135
• /
• 1997

A control approch for the robust position control of IM based on the binary disturbance observer is described. The conventional binary observer is used to remove the chattering problem of variable structure system. However the steady state error may be existed, because the conventioal binary observer etimates external disturbance with constant boundary layers. Thus in order to overcome this problem, the improved binary observer is proposed. By employing the proposed observer, the robustness is achived and the continuous control is realized without the chattering problem and the steady state error. The effectiveness of the proposed observer is confirmed by the computer simulation.

• 전기학회논문지P
• /
• 제61권4호
• /
• pp.199-205
• /
• 2012

This paper propose a improved parameter estimations of five-phase squirrel-cage induction motor(IM) for speed control system on field oriented control(FOC). In order to high performance control of ac the motors using a FOC and DTC(direct torque control) algorithm, there are required precise motor parameters for slip calculation, flux observer, controller gain, rotor position and speed estimation, and so on. We are suggest a estimation method of the motor parameters that developing five-phase squirrel-cage IM have a stator of concentrated winding for experimental. There are results of stator winding test, no-load test, locked rotor test, and obtained equivalent circuits using manufactured experimental apparatus. For presenting the superior performance of the speed control system in adapted the parameters, experimental results are presented using a 32-bit fixed point TMS320F2812 DSP with 1.5[KW] IM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.74-76
• /
• 1995

This paper describes the precise position control of the linear DC motor for carrier. We analyze the switching line of seek mode control and propose the modified switching line according to the mass and distance. Experimental results demonstrate that good performance is achieved by the proposed controller.

• 전력전자학회논문지
• /
• 제12권1호
• /
• pp.19-26
• /
• 2007

본 논문은 외란 변화에 대하여 정밀위치 변화를 줄이고자 외란 관측기를 사용하였고 이를 유도전동기에 적용하였다. 제안된 알고리즘이 외란 변화에 대한 유도전동기의 정밀 제어에 강인함을 보이고 있다. 외란 관측기가 있는 이 시스템은 높은 실효성과 외란 보상에 뛰어난 데드비트 컨트롤을 사용하고 있다. 이 효과를 보이기 위해서 모의 실험은 Simulink를 사용하였고 DSP6416 및 TCP-IP 네트워크 보드와 연동하여 실험하였다.

• 조명전기설비학회논문지
• /
• 제29권7호
• /
• pp.38-46
• /
• 2015

This paper propose a variable parameter estimations for variable over current load of five-phase squirrel-cage induction motor(IM) to servo control system. In order to high performance control of AC motor using a field oriented control(FOC) and direct torque control(DTC) algorithm, there are required precise motor parameters for slip calculation, flux observer, controller gain, torque command of current components, rotor position, speed estimation, and so on. We are suggest a analyzed estimation results of the motor parameters that developing five-phase squirrel-cage IM have a stator of concentrated winding for experimental within variable over current load at rated input frequency. There are results of stator winding measurement, no-load test, locked-rotor test, variable over current load test, and estimated parameters of equivalent circuits using manufactured experimental apparatus by IEEE Standard Test Procedure for Polyphase Induction Motors and Generators 112-2004.

• 전기학회논문지P
• /
• 제63권4호
• /
• pp.241-247
• /
• 2014

This paper propose a variable parameter estimations of five-phase squirrel-cage induction motor(IM) for speed control system. In order to high performance control of AC motor using a field oriented control(FOC) and direct torque control(DTC) algorithm, there are required precise motor parameters for slip calculation, flux observer, controller gain, rotor position, speed estimation, and so on. We are suggest a analyzed estimation results of the motor parameters that developing five-phase squirrel-cage IM have a stator of concentrated winding for experimental of variable input power frequency. There are results of stator winding test, no-load test, locked-rotor test, variable actual load test, and estimated parameters of equivalent circuits using manufactured experimental apparatus by IEEE Standard Test Procedure for Polyphase Induction Motors and Generators 112-2004.

• 제어로봇시스템학회논문지
• /
• 제18권11호
• /
• pp.1034-1039
• /
• 2012

In this paper, a structure of precise positioning based on satellite navigation system is proposed. The proposed system is consisted with three parts, range domain filter, navigation filter and position domain filter. The range domain filter generates carrier phase-smoothed-Doppler and Doppler-smoothed-code measurements. And the navigation filter calculates position and velocity using double-differenced code/carrier phase/Doppler measurements. Finally, position domain filter smooth position error, and it means enhancement of positioning performance. The proposed positioning method is evaluated by trajectory analysis using precise map date. As a result, the position error occurred by multipath or cycle slip was reduced and the calculated trajectory was in true lane.

• 전력전자학회논문지
• /
• 제11권1호
• /
• pp.38-45
• /
• 2006

본 논문은 유도기의 정밀위치제어를 얻고자 외란 변화에 대하여 정밀위치 제어를 할 수 있는 외란 관측기를 적용하였다. 제안된 알고리즘은 외란 변화에 대한 유도전동기의 정밀 제어에 강인함을 보이고 있다. 모든 게인의 튜닝은 디지털 제어 이론에 입각하여 이산 영역에서 구하였다. 또 시뮬레이션은 시뮬링크를 사용하여 그 구성을 매우 간편하게 하였다. DS1102 보드를 이용한 유도기 정밀위치 제어 결과는 제안된 시스템의 유용성을 보인다.