• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.147-155
• /
• 1993

An urban runoff model is proposed in this study, which is composed of a surface runoff model and a channel routing model. ILLUDAS is selected as the best fit model for the surface runoff computation, and the dynamic wave model using weighted four-point implicit finite difference scheme is used to perform the channel routing. The 3rd Seongbook bridge basin located in Seoul is selected as the test basin for the proposed model, and the rainfall-runoff data are collected to calibrate and verify the urban runoff model. The computed results by this model showed the fair accuracy when compared with the observed hydrographs. So the model proposed in this study could be used to compute the urban river flow as well as the outflow from the urban drainage area.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.862-866
• /
• 2005

For urban watershed models, the ILLUDAS and SWMM are the popular rainfall-runoff models used in Korea. However, combined sewage systems in urban areas produced problems when a flood occured because of the surcharged precipitation amount which drained to the streams directly. Also, the lack of pipe line data and the difficulties of modeling yield inappropriate modeling results in urban runoff analysis. In addition, rainfall-runoff models in urban areas which use channel routing could have inaccurate and complicated processes. In this paper, the MIKE SWMM model has been applied for the stable runoff analysis of urban areas. Watershed and pipe line data were established by using past inundated records, DEM data, and the numerical pipe line data. For runoff modelings, the runoff block was adapted to a basin and the Extran block using dynamic equations was applied to the sewage system. After comparing to models that exist, it is concluded that the MIKE SWMM model produces reliable and consistence results without distorting the Parameters of the model.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.3 s.18
• /
• pp.29-39
• /
• 2005

The objective of this study is to analyze the relation of critical duration according to hydrologic characteristics in urban areas. RRL, ILLUDAS, SWMM, and SMADA urban runoff models were applied to the Seongnae and Banpo watershed and experiment area of the Dong-Eui University. Also, hydrologic characteristics such as temporal pattern of rainfall, rainfall intensity formula, antecedent moisture condition, return period, and urban runoff model were used to simulate the critical duration of the test areas. The results of this study are as follows; (1) The type of temporal pattern of rainfall which causes maximum peak discharge in urban area has resulted in Huff's 4th quartile distribution. (2) The critical duration in urban areas were not influenced by hydrological factors except urban runoff model. (3) Peak discharge and critical duration in urban areas were influenced by the urban runoff model, and the SWMM model using Huff's 4th quartile distribution shows maximum critical duration.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.143-148
• /
• 2010

In this study, the mixed model of the surface rainfall-runoff analysis using grid data and Illudas model was applied to the urban watershed of Bulgang river. After the surface rainfall-runoff was estimated with GIS data, the runoff hydrograph was calculated using network analysis at Jeungsan bridge, which is the final output of watershed. Estimated runoff hydrograph in this study was compared to the observed runoff hydrograph which is converted from the water stage at Jeungsan bridge. The relative errors of total runoff volume and peak discharge showed the range values of 11.70%~16.30% and 1.10%~6.96%, and then the difference of peak times had the values of less than 1 hour for 4 storms. Therefore, the mixed model in this study could be considered to estimate the runoff hydrograph for the prevention of disasters in urban watershed.

• Water for future
• /
• v.26 no.2
• /
• pp.49-57
• /
• 1993

A hydrological method is performed to determine the critical duration of design rainfall for the design of storm sewer in Seoul. To seize the effect of the duration and the temporal distribution of the rainfall to the peak discharge of the storm sewer, the Huff's quartile method is used as a temporal pattern for the design rainfall of any durations (9 cases for 20-240 min.) with 10 years return period. The critical duration of design rainfall is determined as the duration which maximizes the peak discharge. This study is applied to 18 urban drainage systems in Seoul. The ILLUDAS model is applied to runoff analysis, and the result shows that the duration which maximizes peak discharge is 30, 60 minutes generally. The relation diagram between peak discharge for the critical duration and watershed area is prepared for the design of storm sewer.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.107-114
• /
• 1992

With the increasing of impervious area and shortening of travel time, the risk of flooding in urban area becomes a serious problem in Seoul metropolitan area, and its alternatives are needed. In this study, one of urban flood alternatives, a fuzzy control technique is applied in pumping station to test its drainage capacity of inland inflow, and compared with existing pumping criteria (controled by water level). Three design rainfalls(10, 30, and 50 year) are applied to ILLUDAS model to calculate inflow in detention reservoir. To check the efficiency of fuzzy control, two fuzzy rules are used in the operation of pumping station. In these results, fuzzy control rules, based on the experiences of experts, show applicability in practice and effectiveness in inland flooding prevention.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.297-302
• /
• 2003

Recently, Flood hazard has been increased frequently in urban area by rainfall and Typhoon. To manage flood hazard effectively, it needs to construction of flood information management system. Especially, run-off by flood in urban area must be considered not only surface outflow by topographic gradient and elevation but also conduits outflow along conduit network. This paper suggests the flood hazard management system for analyzing flood outflow in urban area using conduits outflow simulation by ILLUDAS model and providing quickly flood hazard information using WebGIS and MobileGIS.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1209-1213
• /
• 2005

It reflects well feature of slope that is characteristic of city river basin of Pusan local. Process various hydrological datas and basin details datas which is collected through basin basis data. weather satellite equipment(EMS-DEU) and automatic water level equipment(AWS-DEU) and use as basin input data of ILLUDAS model, SWMM model and HEC-HMS model In order to examine outflow feature of experiment basin and then use in reservoir design of experiment basin through calibration and verification about HEC-HMS model. Inserted design rainfall for 30 years that is design criteria of creek into HEC-HMS model and then calculated design floods according to change aspect of the impermeable rate. Capacity of reservoir was determined on the outflow mass curve. Designed imagination reservoir(volume $54,000m^3$) at last outlet upper stream of experiment basin, after designing reservoir. It could be confirmed that the peak flow was reduced resulting from examining outflow aspect. Designing reservoir must decrease outflow of urban areas.

• Journal of Korea Water Resources Association
• /
• v.39 no.12 s.173
• /
• pp.1013-1022
• /
• 2006

Urban flooding is usually caused by the surcharge of storm sewers. For this reason, previous studies on urban flooding are mainly concentrated on the simulation of urban drainage systems. However these approaches that find the pipes which have insufficient drainage capacity are very approximate and unreasonable ways in establishing both flood prevention and flood-loss reduction planning. In this study, a two-dimensional model linked the existing ILLUDAS model is developed to calculate the accurate and resonable solution about urban flood inundation and it is verified by using the simulation of July 2001 flood in Seoul. In the urban area with a small difference of ground elevations, the two-dimensional flood propagation phases must be considered to make a accurate analysis for inundated area and depth. The result of this study can be used to construct fundamental data for a flood control plan and establish a urban flood forecasting/warning system.

• Journal of Korea Water Resources Association
• /
• v.41 no.5
• /
• pp.491-501
• /
• 2008

In order to describe runoff characteristics of urban drainage area, outflow from subbasins divided by considering topography and flow path, is analyzed through stormwater system. In doing so, concentration time and time-area curve change significantly according to basin shape, and runoff characteristics are changed greatly by these attributes. Therefore, in this development study of FFC2Q model by MLTM, we aim to improve the accuracy in analyzing runoff by adding a module that considers basin shape, giving it an advantage over popular urban hydrology models, such as SWMM and ILLUDAS, that can not account for geometric shape of a basin due to their assumptions of unit subbasin as having a simple rectangular form. For subbasin shapes, symmetry types (rectangular, ellipse, lozenge), divergent types (triangle, trapezoid), and convergent types (inverted triangle, inverted trapezoid) have been analyzed in application of time-area curve for surface runoff analysis. As a result, we found that runoff characteristic can be quite different depending on basin shape. For example, when Gunja basin was represented by lozenge shape, the best results for peak flow discharge and overall shape of runoff hydrograph were achieved in comparison to observed data. Additionally, in case of considering subbasin shape, the number of division of drainage basin did not affect peak flow magnitude and gave stable results close to observed data. However, in case of representing the shape of subbasins by traditional rectangular approximation, the division number had sensitive effects on the analysis results.