• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.10
• /
• pp.1417-1425
• /
• 2014

The selection of morphologically normal spermatozoa is critical to obtain high breeding performances in boar breeding farms and artificial insemination (AI) centers. Parameters for the selection of semen mainly include total sperm motility, concentration, and morphology. However, these primary parameters are often not reliable for discriminating between normal and abnormal, non-fertilizable spermatozoa. The present study was designed to compare the motion characteristics, fertilization ability using in vitro fertilization (IVF), and acrosome formation of the semen from boars having low (boar number 2012) and normal (boar number 2004 and 2023) breeding performances. The ultimate goal was to identify additional simple and easy criteria for the selection of normal sperm. There was no significant difference between boar 2004 and boar 2023 sperm total motility in computer assisted sperm analysis. However, boar number 2012 semen presented a significantly reduced population of rapid moving spermatozoa and an increased population of slow moving spermatozoa compared to boar numbers 2004 and 2023. Analysis of detailed motion characteristics revealed that sperm from boar number 2012 had significantly reduced motility in progressiveness, average path velocity, straight-line velocity (VSL), curvilinear velocity (VCL), straightness, and linearity. The assessment of the fertilizing ability by IVF also showed that sperm from boar number 2012 showed a fertility rate of 3.4%, whereas sperm from boar number 2023 had a fertility rate of 75.45%. Interestingly, most of the sperm nuclei were found on the peripheral area of the oocytes, suggesting that the sperm from boar number 2012 lacked penetration ability into the oocyte zonapellucida. The acrosome formation analysis using Pisum sativum agglutinin staining demonstrated that the sperm from boar number 2012 had a defect in acrosome formation. Consequently, primary parameters for selecting semen before AI such as motility are not sufficient to select normal and fertilizable spermatozoa. In conclusion, the present study suggests that the acrosome staining and detailed motion characteristics such as progressiveness, VCL, and VSL should be included in determining semen quality together with primary parameters for successful AI and high breeding performance in the swine industry.

• Korean Journal of Community Nutrition
• /
• v.11 no.4
• /
• pp.449-458
• /
• 2006

The purpose of this study was to determine the characteristics of infants' temperaments and eating behaviors, mothers' eating behaviors and feeding practices in poor eating infants. The participants were 80 infants of 12-24 months (27 poor eaters and 53 matched normal controls) from a hospital and a public health center. Mothers were questioned about their eating behaviors and feeding practices, and infants' temperaments, eating behaviors, and nutrient intakes by one day food recall. Subjects were divided by mean nutrient adequacy ratio (MAR, < 0.75; poor eater). Intakes of Ca, P, Fe, Zn, thiamin, riboflavin, niacin, vitamin C, E, folate were below 75% RDA in poor eaters, whereas protein, thiamin, riboflavin, vitamin B$_6$, C, folate exceeded 125% RDA in good eaters. Rhythmicity of infants' temperaments and eating behaviors, restriction of mothers' eating behaviors and feeding practices were significantly lower, whereas activity levels of infants' temperaments were higher than good eaters. In multiple logistic regression model of poor eaters, activity of infants' temperaments (T, OR: 1.19, CI: 1.05 - 1.35) and attention spans of infants' eating behaviors (A, OR: 1.18, CI: 1.03 - 1.35) were significantly positive, whereas rhythmicity of infants' eating behaviors (R, OR: 0.79, CI: 0.61-0.94) was significantly negative [E (the legit) : -6.8644+0.1712$\times$T-0.2337$\times$R+0.1641$\times$A]. Our findings suggest that examination of eating behaviors, feeding practices, and temperaments will help target interventions to improve infants' food intakes, and these variables should be examined at the time of nutrition counseling.

• Korean Journal of Microbiology
• /
• v.43 no.2
• /
• pp.124-129
• /
• 2007

We evaluated the use of citrus fruit fermented by lactic acid bacteria, as a feed supplement for flounder (Paralichthys olivaceus) cultivation. For the fermentation, a lactic acid bacterial strain W-44 showing antibacterial activity was isolated from kimchi. From the phylogenetic analysis based on, 16S rDNA sequence, the strain W-44 was identified as Lactococcus lactis. After the fermentation of citrus fruit with L. lactis W-44, the contents of naringenin and hesperetin, bioactive flavonoid aglycones, were increased about ten-fold and six-fold, respectively. The effects of fermented citrus fruit-based feed additives (CFBFA) were tested on the growth of flounder, Paralichthys olivaceus. There were significant differences in average total length and body weight between the experimental and control group. The growth rate of the experimental group fed with the 0.2% CFBFA-supplemented diet was increased 4.5% and 20.9% more than the control group in total length and body weight, respectively. These results suggest that the fermented citrus fruit could be used as a functional feed additive for flounder cultivation.

• Journal of Food Hygiene and Safety
• /
• v.25 no.3
• /
• pp.203-208
• /
• 2010

In this study, the level of migration of 5 kinds of volatile organic compounds (VOCs) (toluene, styrene, ethylbenzene, isopropylbenzene and n-propylbenzene) into distilled water from polystyrene-made food containers was measured using Purge&Trap combined with GC/FID. The contents of the VOCs which have regulatory limits in Korea food code only for material specification were determined under three exposure conditions which were 30 min at $60^{\circ}C$, 30 min at $95^{\circ}C$ and actual situation of instant noodle intake. The calibration curve of 5 compounds showed good linearity ($^r2$ = 0.9976~0.9995) within the concentration range of 1~50 ng/mL. The limit of detection (LOD) and limit of quantification (LOQ) were validated at range of 0.041~0.092 and 0.135~0.304 ng/mL, respectively. The average migration contents of 5 compounds were below 5 ng/mL except for styrene. The average contents of styrene were highly detected at $95^{\circ}C$ for 30 min exposure (52.71 ng/mL). Under actual condition at instant noodle intake, the average contents of styrene was 17.23 ng/mL. The results demonstrated that the migration rate of VOCs was related to storage temperature and time.

• Applied Biological Chemistry
• /
• v.49 no.4
• /
• pp.276-280
• /
• 2006

Traditionally fermented Cheonggukjangs were collected from Gyeonggi and Gangwon provinces and 22 strains were isolated and identified by using 165 rDNA sequences. Most of the identified strains were Bacillus subtilis and B. licheniformis, B. subtilis and B. licheniformis are dominant in the Gyeonggi area and B. licheniformis in the Gangwon area. In the growth pattern of the isolated strains, the duration of lag phase was generally 5 to 7 hours and stationary phase was reached after 23 to 40 hours of incubation. Total cell populations at the stationary phase were between $1{\times}10^6\;CFU/ml$ and $5{\times}10^7\;CFU/ml$. The fermenting ability of carbohydrates of isolates showed some differences among the regions. The isolated strains from Yong-In, Gyeonggi showed higher fermenting abilities with D-xylose, xylitol, D-tagatose and Methyl-$\alpha$-D-mannopyranoside. D-lactose, D-tagatose, D-xylose, Methyl-$\alpha$-D-mannopyranoside, amygdalin, arbutin, esculin and 2-keto-gluconate were well fermented with the An-Seong's strains; L-rhamnose, inositol, D-mannitol, D-sorbitol, celibiose and gluconate with the Kawang-Ju's stains; and D-lactose with the Odaesan's strains.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.25 no.4
• /
• pp.7-12
• /
• 1988

The Resistance Committee of Korea Towing Tank Conference extended the Cooperative Experimental Study Program(1985)[1] to perform the geosim tests by exchanging the five different scaled Series 60, $C_B=0.60$ models between the participating organizations and 13 sets of resistance data have been obtained. The test results are compared among the participating towing tanks and also with the results given in the report of the Resistance and Flow Com-identify the mittee of 18th ITTC. The form factor of each model is derived by Prohaska's method to investigate its dependency on $R_n$. On the other hand, at each $F_n$, form factors are also derived by Telfer's method to relation between $F_n$ and form factor. For this hull form, form factors show relatively weak dependency on $R_n$ and strong dependency on $F_n$. And it is also found that dependencies on both have a cross relation. It seems that further study should be continued to understand more clearly the physical phenomena involved in this problem.

• Journal of Korea Water Resources Association
• /
• v.41 no.12
• /
• pp.1187-1198
• /
• 2008

Many reservoirs in Korea and their downstream environments are under increased pressure for water utilization and ecosystem management from longer discharge of turbid flood runoff compared to a natural river system. Turbidity($C_T$) is an indirect measurement of water 'cloudiness' and has been widely used as an important indicator of water quality and environmental "health". However, $C_T$ modeling studies have been rare due to lack of experimental data that are necessary for model validation. The objective of this study is to validate a coupled three-dimensional(3D) hydrodynamic and particle dynamics model (ELCOM-CAEDYM) for the simulation of turbid density flows in stratified Daecheong Reservoir using extensive field data. Three different groups of suspended solids (SS) classified by the particle size were used as model state variables, and their site-specific SS-$C_T$ relationships were used for the conversion between field measurements ($C_T$) and state variables (SS). The simulation results were validated by comparing vertical profiles of temperature and turbidity measured at monitoring stations of Haenam(R3) and Dam(R4) in 2004. The model showed good performance in reproducing the reservoir thermal structure and propagation of stream density flow, and the magnitude and distribution of turbidity in the reservoir were consistent with the field data. The 3D model and turbidity modeling framework suggested in this study can be used as a supportive tool for the best management of turbidity flow in other reservoirs that have similar turbidity problems.

• Korean Journal of Food Science and Technology
• /
• v.28 no.2
• /
• pp.324-329
• /
• 1996

In order to develop a novel dewatering process for soybean milk residue, hydraulic press with ohmic heating was built and its expression conditions were examined. The electric conductivity of raw soybean milk residue was 0.128 S/m and increased linearly with increasing temperature. Water content of the residue could be reduced to 74% with the conventional hydraulic press, but to less than 70% by applying ohmic heating to the hydraulic press. The most effective dewatering was achieved by applying alternative current with 5 kHz frequency at 60 V during expression. The solid content of the expressed liauid was markedly reduced from 10% to 3.3% by ohmic heating during expression. Temperature of the cake rose to above $95^{\circ}C$ during the dewatering due to ohmic heating.

• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.9-18
• /
• 2020

In this study, we conducted alkali hydrolysis on sea-island type PET ultramicrofiber tricot fabric and dyeing according to the various conditions with black disperse dye. Herein, we evaluated the weight loss rate and tensile strength according to the NaOH contents. The optimal alkali hydrolysis treatment conditions were set to 25 %omf NaOH with a treatment time of 60 min at 110 ℃, and average weight loss rate of the PET ultramicrofiber tricot fabric is about 23 %. The dyeing conditions were investigated with different dyeing temperatures(95-135 ℃), dyeing time(20-60 min), dye contents(2-10 %omf), dispersant contents(1-9 g/ℓ), pH buffer solution contents(1-9 g/ℓ), UV-absorbent contents(5-25 %omf) and reduction cleaning process conditions for black color. We obtained the optimum conditions of the dyeing with the dye contents of 8 %omf, the dispersant contents of 1 g/ℓ, the pH buffer solution contents of 1 g/ℓ, the UV-absorbent contents of 10 %omf, the dyeing temperature of 135 ℃ and the dyeing time of 40 min. The light colorfastness of dyed ultramicrofiber PET tricot fabric was good to excellent in the range of 4 to 5.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1682-1688
• /
• 2007

To develop multifunctional microbial inoculant, microorganisms with antagonistic activity and biofertilizing activity were screened. Pantoea agglomerans and Bacillus megaterium from our laboratory culture collection, and strain MF12 from soil near poultry farm in Miryang were selected. On the basis of morphological, physiological studies and 16S rDNA sequence analysis, isolate MF12 was identified as the Bacillus pumilis. Three strains were studied for insoluble phosphate solubilization, indole-3-acetic acid (IAA) and siderophore production, ammonification ability, hydrolytic enzyme production and antifungal activity against phytopathogenic fungi. P. agglomerans did not produce any visible clear zone on agar plate containing 0.5% $Ca_3(PO_4){_2}$ as a sole phosphorus source. However, this strain could solubilize insoluble phosphate in liquid medium. All strains produced IAA ranged from $3{\sim}639{\mu}g/ml$ depending on culture time and had ammonification ability. Among three strains, only P. agglomerans produced siderophore. P. agglomerans produced pectinase and lipase, B. megaterium produced amylase, protease and lipase while B. pumilis produced protease and lipase. P. agglomerans showed antifungal activities against phytopathogenic fungi, Fusarium oxysporum and Colletotrichum gloeosporioides. B. pumilis showed antifungal activities against Botrytis cinerea, Sclerotinia sclerotiorum and Phythium ultimum.