• Journal of Korean Society of Disaster and Security
• /
• v.9 no.1
• /
• pp.33-38
• /
• 2016

Real time location system was development for safety management at road and bridge maintenance field. The system can check the real-time location detection, movement history, behavior of a number of laborers. The system consisted of a Bluetooth and ZigBee that uses low-power. It had a very large error that the previous method for the position recognition by triangulation using the RSSI. Because This study proposed a new distance measurement and correction scheme using RSSI and accelerometer. It was evaluated in the maintenance field. A development system were evaluated in the field, the results are shown an error between 0.2 m and 0.4 m. And through the acceleration of history it was confirmed by determining possible to determine the safety situation of the laborers.

• Korean Journal of Clinical Pharmacy
• /
• v.27 no.4
• /
• pp.258-266
• /
• 2017

Objective: To develop a population pharmacokinetics (PK)/pharmacodynamics (PD) model for alcohol in healthy volunteers and to elucidate individual characteristics to affects alcohol's PK or PD including dissolved oxygen. Methods: Following multiple intakes of total 540 mL alcohol (19.42 v/v%) to healthy volunteer, blood alcohol concentration was measured using a Breathe alcohol analyser (Lion SD-400 $Alcolmeter^{(R)}$). A sequential population PK/PD modeling was performed using NONMEM (ver 7.3). Results: Eighteen healthy volunteer were included in the study. PK model of alcohol was well explained by one-compartment model with first-order absorption and Michaelis-Menten elimination kinetics. $K_a$, V/F, $V_{max}$, $K_m$ is $8.1hr^{-1}$, 73.7 L, 9.65 g/hr, 0.041 g/L, respectively. Covariate analysis revealed that gender significantly influenced $V_{max}$ (Male vs Female, 9.65 g/hr vs 7.38 g/hr). PD model of temporary systolic blood pressure decreasing effect of alcohol was explained by biophase model with inhibitory $E_{max}$ model. $K_{e0}$, $I_{max}$, $E_0$, $IC_{50}$ were $0.23hr^{-1}$, 44.9 mmHg, 138 mmHg, 0.693 g/L, respectively. Conclusion: Model evaluation results suggested that this PK/PD model was robust and has good precision.

• Journal of Biosystems Engineering
• /
• v.34 no.1
• /
• pp.63-68
• /
• 2009

This study was carried out to determine necessary conditions for optimal ventilation of small windowless piglet house (5.2 (W) ${\times}$ 12.3 (L) ${\times}$ 2.3 (H) m) with negative tunnel ventilating system using CFD (Computational Fluid Dynamics) simulation. The weaning piglet house for this experiment was consisted of 4 rooms (520 (W) ${\times}$ 300 (L) cm), 3 fences (70 (H) cm), 1 air inlet (350 (W) ${\times}$ 2 (H) cm) and 1 exhaust fan (50 (D) cm), and simulated using CFD code, FLUENT. The simulation results for the original weaning piglet house showed ununiform ventilation for each room. Therefore, to uniformly ventilate all rooms, the heights of the air inlet and first fence were modified to 3 cm and 100 cm, respectively. The simulation result f3r the modified weaning piglet house showed uniform ventilation for all rooms and the optimum air inlet velocity of 1.4 m/s.

• Journal of Sensor Science and Technology
• /
• v.10 no.3
• /
• pp.196-206
• /
• 2001

Real temperature profiles of a planar chromel-alumel mutli-junction thermal converter(TC 1) were measured by thermal image. Temperature profiles as a function of input power of thermal converters(TC 1${\sim}$TC 6) were simulated by 3-dimensional ANSYS program based on finite element method. Temperature difference between the hot junction and the cold junction for TC 1 was smallest and largest for TC 6 and correspondingly, he voltage response for TC 1 and TC 6 showed the smallest value of 3.09 mV/mW and the largest value of 4.03 mV/mW, respectively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.3
• /
• pp.331-339
• /
• 2016

Real time location (RTL) system which can control the safety of laborers in the underground space is developed in this study. This innovative system can monitor the location and history of movement of multiple laborers in real time. To accommodate constrains of the underground space, the system is portable and composed with low-battery mode. Since conventional method to detect the location of laborer with radio signal strength indicator (RSSI) contains high errors, new measurement system using accelerometers and correction method are suggested in this study. Field test is performed to validate the developed system. The error for moving laborer was 0.4 m and for non-moving laborers was 0.2 m. Thus, it is found that the new RTL system can be used to monitor the location of laborers in the underground construction space.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.629-634
• /
• 2011

A prestudy on expendable turbine engine for high-speed vehicle was conducted. The two possible mission profiles were established to decide the engine requirements and Design Point, and Design Point analysis was performed with the values of design parameter which were obtained from similar class engines and technical references. The results showed that Specific Net Thrust is 2599.4 ft/s and Specific Fuel Consumption is 1.483 lb/($lb^*h$) at the flight condition of Sea Level, Mach 1.2. It was also found through the performance analysis on the two possible mission profiles that major design parameters for determining Net Thrust were Turbine Inlet Temperature for low supersonic flight speed and Compressor Exit Temperature for high supersonic flight speed. In addition, simple turbojet engine with axial compressor, straight annular combustor, axial turbine and fixed throat area converge-diverge exhaust nozzle was proposed as the configuration of simple low cost light engine.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.459-470
• /
• 2008

DATS which is one of three subsystems of IDACS is responsible to receive Sensor Data, LRIT and HRIT in L-Band and transmit LRIT and HRIT in S-Band from/to COMS satellite. This paper shows detailed test procedures used to verify the performance and functionality of DATS after its implementation was completely finished. As a part of efforts to verify key DATS performance, G/T and EIRP were measured by using solar flux density as radio source. Regarding the verification of DATS functionality, RF loop-back test was conducted to validate if there is no BER degradation excepting MODEM/BB implementation loss occurred in the integrated DATS. Integrated with 13m antenna, DATS successfully restored image from received MTSAT-1R broadcasting data, LRIT and HRIT, of which frequencies are all L-Band. S-Band transmission was also verified through test antenna placed away from 13m antenna by measuring real LRIT and HRIT spectrum in S-Band. From those test results, DATS is determined to be fully ready to communicate with COMS in L-Band and S-Band.

• YAKHAK HOEJI
• /
• v.56 no.2
• /
• pp.92-98
• /
• 2012

This study was conducted to determine if YJ-1, a novel herbal complex from a mixture of six oriental herbs (Hydnocarpi Semen, Sesami Semen, Dictamni Radicis Cortex, Momordicae Semen, Xanthii Fructus, and Sophorae Radix), has therapeutic properties for the treatment of atopic dermatitis (AD). Using AD like symptom-induced NC/Nga mice by 1-chloro 2,4-dinitrobenzene (DNCB), the effectiveness of YJ-1 on AD was evaluated. Elidel cream$^{(R)}$ (1% pimecrolimus) was used as a control. Dermal application of YJ-1 reduced major clinical signs of AD such as erythema, pruritus, lichenification, edema/escoriations, and dryness. Interestingly, YJ-1 more improved AD-related symptoms including decrease of spleen weight, IL-4, and IgE level in the serum as well as reduction of scratching counts and clinical skin severity in the NC/Nga AD mouse model. Especially, treatment of YJ-1 at 20% in NC/Nga mice more effected than Elidel cream. These results suggest that the ointment of YJ-1 may enhance the process of AD healing by alleviating allergic reaction and has potential for therapeutic reagent for the treatment of AD.

• Mycobiology
• /
• v.42 no.2
• /
• pp.206-209
• /
• 2014

In this study, we identified the causative agent of stem-end rot in potatoes that were grown in Gangwon alpine areas of Korea in 2013. The disease symptoms included appearance of slightly sunken circular lesion with corky rot on the potato surface at the stem-end portion. The fungal species isolated from the infected potatoes were grown on potato dextrose agar and produced white aerial mycelia with dark violet pigments. The conidiophores were branched and monophialidic. The microconidia had ellipsoidal to cylindrical shapes and ranged from $2.6{\sim}11.4{\times}1.9{\sim}3.5{\mu}m$ in size. The macroconidia ranged from $12.7{\sim}24.7{\times}2.7{\sim}3.6{\mu}m$ in size and had slightly curved or fusiform shape with 2 to 5 septate. Chlamydospores ranged from $6.1{\sim}8.1{\times}5.7{\sim}8.3{\mu}m$ in size and were present singly or in pairs. The causal agent of potato stem-end rot was identified as Fusarium oxysporum by morphological characterization and by sequencing the internal transcribed spacer (ITS1 and ITS4) regions of rRNA. Artificial inoculation of the pathogen resulted in development of disease symptoms and the re-isolated pathogen showed characteristics of F. oxysporum. To the best of our knowledge, this is the first study to report that potato stem-end rot is caused by F. oxysporum in Korea.

• Korean Journal of Materials Research
• /
• v.29 no.12
• /
• pp.774-780
• /
• 2019

The performance of Li-ion hybrid supercapacitors (asymmetric-type) depends on many factors such as the capacity ratio, material properties, cell designs and operating conditions. Among these, in consideration of balanced electrochemical reactions, the capacity ratio of the negative (anode) to positive (cathode) electrode is one of the most important factors to design the Li-ion hybrid supercapacitors for high energy storing performance. We assemble Li-ion hybrid supercapacitors using activated carbon (AC) as anode material, lithium manganese oxide as cathode material, and organic electrolyte (1 mol L^-1 LiPF₆ in acetonitrile). At this point, the thickness of the anode electrode is controlled at 160, 200, and 240 ㎛. Also, thickness of cathode electrode is fixed at 60 ㎛. Then, the effect of negative and positive electrode ratio on the electrochemical performance of AC/LiMn₂O₄ Li-ion hybrid supercapacitors is investigated, especially in the terms of capacity and cyclability at high current density. In this study, we demonstrate the relationship of capacity ratio between anode and cathode electrode, and the excellent electrochemical performance of AC/LiMn₂O₄ Li-ion hybrid supercapacitors. The remarkable capability of these materials proves that manipulation of the capacity ratio is a promising technology for high-performance Li-ion hybrid supercapacitors.