• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.839-841
• /
• 2004

IEC 60044-6 (Requirements for protective current transformers for transient performance) was established to Korea Standard (KS C IEC 60044-6 ; Instrument transformers Part 6 ; Requirements for protective current transformers for transient performance) in December 11, 2003. In this paper, requirements, test items and test methods protective current transformers for transient performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.836-838
• /
• 2004

Alternating current switch-fuse combinations shall be designed so as to protect for load circuit of distribution line. this switch system shall be test on making and breaking at short-circuit current. the test dutys were performed to prove correct coordination between the switch and fuses in applied test conditions This paper describes characteristics and test method for prove to performance of alternating current switch-fuse combinations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.842-844
• /
• 2004

The Back Up Breaker and Making Switch are very important equipments for the short circuit test facility, and contacts are the most important parts of the above switches. There are very many kind of contacts according to switches characteristic and should be done the verification test before use, especially development contacts. This study describes the class of switches, arc chute, material of whole contacts and essential test for verification. The essential test for verification are dielectric test, mechanical operation test, short-time withstand current test, load current breaking test, and short-circuit making current test etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1394-1395
• /
• 2006

$(Na_{0.5}LaK_{0.5})NbO_3$ (NKN) thin films were fabricated by the alkoxide-based MOD method. NKN stock solutions were made spin-coated onto the Pt/Ti/$SiO_2$/Si substrate. The structural properties of the NKN thin films examined by x-ray diffraction. The perovskite phase was obtained as a function of the annealing temperature from $550^{\circ}C$ to $700^{\circ}C$ for 1h. The crystallinity and grain size of the NKN thin films increased with increasing annealing temperature. The dielectric constants and loss of the NKN thin films annealed at $650^{\circ}C$ ($t_{eq}$=2.35 nm) showed 323 and 0.025.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.834-836
• /
• 2003

This paper describes the optimal design, construction and performance evaluation of coaxial shunts used in high current testing laboratory for current measuring system. These shunts, which are of tubular type coaxial shunts, the currents to be measured range from Amperes to several kiloAmperes, and the frequency of the signals has a bandwidth from DC to megaHertz. The shunt must have the mechanical strength to support the forces produced by the transient current, above all, the measuring capabilities of shunt are dependent upon short response time and it must be as free as possible of inductive effects. In this paper presents both characteristic of shunt and design of tubular type coaxial shunt.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.858-860
• /
• 2003

This paper introduces the drive system for 500MVA short-circuit generator. Drive system is usually low-voltage, but this system is 2300V high-voltage using Insulated Gate Bipolar Transistor(IGBT). Drive system consists of switchgear, 18-pulse transformer, converter(source bridge), inverter(load bridge) and control rack. In this paper, It describes the function and construction of each part.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.846-848
• /
• 2003

대전력 단락시험시 국제규격에서 제시하는 시험회로조건에는 여러 가지가 있다. 그중 시험회로의 역률은 중요한 조건중의 하나로서, 규격마다 다양한 역률 측정방법을 제시하고 있다. 시험전류의 DC성분을 이용하여 역률을 측정하는 방법은 다양한 역률 측정방법중 하나로서 단락전류만으로 역률을 측정할 수 있어 매우유용한 방법이다. 그러나 규격에서도 제시하는바와 같이 DC 성분을 이용하여 역률을 측정하는 방법은 매우 어려운 것으로 알려져 있다. 본 논문에서는 단락전류의 DC 성분을 이용하여 역률을 측정하는 알고리즘을 제시하였다. 또한, 제시된 알고리즘은 STL guide에 따라 개발되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.951-953
• /
• 2005

The current transformer is used for the insulation of measuring instrument, enlargement of measurement scope, standardization of measuring instrument, control of protective device. It's required various performance as the intention of service, site of establishment, insulation. especailly, current transformer has small ratio errors. if current transformer has large ratio error, it's caused a electricity failure. so in this paper, we examine the theory of current transformer, major factor of errors, output performance on over-current.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.966-968
• /
• 2005

Generally the high-voltage and high-current making switch is used to test the short-circuit test. The making switch should be operated always same speed/time and kept electrical-mechanical characteristic. There are spring charge type, hydro-pneumatic type and compressed air type etc. according to operation method of making switch contacts. Especially the making switch contacts of hydro-pneumatic type are moved by actuator and accumulator. To keep same speed/time of contacts and characteristic of making switch, actuator and accumulator should be worked always uniformly. So the dynamic analysis of actuator and accumulator of hydro-pneumatic type making switch will be helpful to maintain and design.

• Mass Spectrometry Letters
• /
• 제12권4호
• /
• pp.186-191
• /
• 2021

A new method for chemical separation of light rare-earth elements (LREEs) using gas-pressurized extraction chromatography (GPEC) is described. GPEC is a microscale column chromatography system that features a constant flow of solvents, which is created by pressurized nitrogen gas. The separation column with a Teflon tubing was packed with LN resin. The proposed GPEC method facilitates production of lesser chemical wastes and faster separation owing to the use of low solvent volume compared to traditional column chromatography. We evaluated the separation of Ba, La, Ce, and Nd using various elution solvents. The column reproducibility of the proposed GPEC system ranged from 2.4% to 4.9% with RSDs of recoveries, and the column-to-column reproducibility ranged from 3.1% to 6.3% with RSDs of recoveries. The proposed technique is robust, and it can be useful for the fast separation of LREEs.