• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.3
• /
• pp.65-71
• /
• 2012

Recently the high-resolution satellite images are helpfully using the land cover, status data for the natural resources or environment management. The effective satellite analysis process for these satellite images that require high investment can be increase the effectiveness has become increasingly important. In this Study, the statistical value of the training data is calculated and analyzed during the preprocessing. Also, that is explained about the maximum likelihood classification of traditional classification method, artificial neural network (ANN) classification method and Support Vector Machines(SVM) classification method and then the IKONOS high-resolution satellite imagery was produced the land cover map using each classification method. Each result data had to analyze the accuracy through the error matrix. The results of this study prove that SVM classification method can be good alternative of the total accuracy of about 86% than other classification method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.183-190
• /
• 2007

To make use of surveying data obtained from different sensors and different techniques, it is a pre-requite step that register them in a common coordinate system. For this purpose, we developed methodologies to register IKONOS-2 Satellite Imagery using LiDAR(Light Detection And Ranging) data. To achieve this, conjugate features from these data should be extracted in advance. In this study, linear features are chosen as conjugate features. Then, to register them, observation equations are established from similarity measurements of the extracted features and the results was evaluated statistically. The results clearly demonstrate that the proposed algorithms are appropriate to register these data.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.157-166
• /
• 2002

원격탐측의 다양한 응용분야 중 저해상도의 다중분광(multispectral) 영상으로부터 고해상도의 영상을 생성하기 위한 영상융합의 연구가 진행되어 오고 있다. 지금까지 융합 결과에 있어서 공간해상력은 향상되었지만 영상의 질에 있어서는 그다지 만족스럽지 못한 결과를 보여주고 있다. 본 연구에서는 최근 여러 분야에서 응용되고 있는 웨이블릿 변환을 이용하여 영상융합을 시도 하고자 한다. 실험영상으로 2001년 11월에 촬영된 대전지역의 IKONOS 공간 해상력 1m 전정색(panchromatic)영상과 4m의 다중분광영상(Blue, Green, Red, NIR)을 이용하여 Daubechies 웨이블릿기반 영상 융합방법을 통해 1m의 칼라영상을 생성하였으며 기존에 일반적으로 사용되고 있는 방법과 그 결과를 비교 분석하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.3
• /
• pp.235-242
• /
• 2002

This study is focused on the analysis of road extracting accuracy from the high resolution IKONOS satellite image data. A geometric correction of the image is performed using the RFM and interpretation with the screen digitizing is also performed for extracting the roads information. For the evaluation of road extracting accuracy, the road locations and the road widths are compared with the national digital map. The comparison results shows that the road boundary and the size of road width are able to extract with the geometric accuracy of $\pm$3.4m and $\pm$1.1m.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.121-128
• /
• 2014

This study investigated the accuracy of DEM generated by heterogeneous stereo satellite images based on RPC. Heterogeneous sensor images with different spatial resolution are SPOT-5 panchromatic and IKONOS images. For the accuracy evaluation of the DEM, we compared the DEMs generated from two kinds of sensors and that produced using homogeneous SPOT-5 and IKONOS stereo images. As results of the evaluation, accuracy of 3D positioning by heterogeneous images was substantially similar to that of homogeneous stereo images for exact conjugate points. But, in terms of quality of the DEM, DEM generated by heterogeneous sensor showed a lower accuracy about twice in RMSE and about 3 times in LE90 than that of homogeneous sensors. As a result, DEM can be generated by using heterogenous satellite imagery. But if we use a stereo image with different spatial resolution, the performance of image matching was very important factor for the production of high-quality DEM.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.57-64
• /
• 2006

Recently the extraction of building height information has been investigated using remotely sensed image and digital maps. In this study, based on the digital photogrammetry principle and mono imagery method the building height information can be extracted by using relationship between ground coordinates and image coordinates. To evaluate the result the comparison was done with building height from 1:5000 aerial photo. The experiment shows that extraction of building height could be performed using IKONOS single imagery and digital map and it is proved that the building height could be reconstructed within some extent.

• Spatial Information Research
• /
• v.11 no.4
• /
• pp.509-518
• /
• 2003

Impervious surface affects urban climate, flood, and water pollution. With a higher paved rate, expanded heat containing capacity of buildings and roads raises atmospheric temperature, and increased quantity of the outflowed water brings flood during a heavy downpour. Moreover, increased non-point source pollutant load is accountable for water pollution. In this regard, it is definitely important to research and keep monitoring the current situation of paved surface, which influences urban ecosystem, disaster and pollution. In fact, collecting information on urban paved surface, which requires the time and expense, is very difficult due to its complicate structure. In order to solve the problem, this study suggested a method to utilize satellite image data for efficient survey on the current condition of paved surface. It analyzed the paved surface condition of Anyang-si by using IKONOS image and discussed the usefulness and limitation of this method.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.2 s.25
• /
• pp.61-66
• /
• 2003

The change detection using the satellite imagery and airphotos has been carried out in the application of terrain mapping, environment, forestry, facility detection, etc. The low-spatial resolution data such as Landsat, NOAA satellite images is generally used for automatic change detection, while on the other hand the high-spatial resolution data is used for change detection by image interpretation. The research to integrate automatic method with manual change detection through the high-spatial resolution satellite image is performed. but the problem such as shadow, building 'lean' due to perspective geometry and precision geocorrection was found. In this paper we performed change detection using the IKONOS satellite images, and present the concerning problem.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.121-132
• /
• 2005

To classify the surface sedimentary facies using IKONOS image collected over Hwangdo tidal flat in Cheonsu Bay, the optical reflectance was compared for characterizing various sedimentary environments such as grain size, tidal channel pattern and area ratio of surface remnant water. The intertidal DEM (Digital Elevation Model) was generated by echo-sounder for analyzing the relationship between IKONOS image and sedimentary environments including topography. The boundary of the optical reflectance between mud-mixed facies and sand facies was distinct, and discrimination of the associated sandbar feature was also possible. The mud-mixed facies coupled with intricate tidal channels is confined to the relatively hi호 topography of Hwangdo tidal flat. The boundary between mud and mixed flat was indistinct in IKONOS optical reflectance but it would have a difference in the area ratio of surface remnant water. The dark area in the image represented the well developed sand facies having a lot of surface remnant water due to the relatively low surface topography. The overall accuracy of characterizing the surface sediment facies by maximum likelihood classification method was 86.2 %. These results demonstrate that high spatial resolution satellite imagery such as IKONOS coupled with knowledge of grain size, surface remnant water and tidal channel network can be effectively used to characterize the surface sedimentary facies (mud, mixed and sand) network of the tidal flat environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.599-602
• /
• 2009

This paper presents a comparative analysis of five different fusion methods. The five different methods to merge multispectral images and panchromatic image are IHS, FIHS, PCA, BT and WT methods. The comparative analysis based on visual analysis and quantitative analysis are performed using the merged results. From the results the FIHS method provide good result, BT, PCA, IHS and WT method show the next order.