• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.397-406
• /
• 2009

A Wireless Access for Vehicular Environment (WAVE) system based on Orthogonal frequency Division Multiplexing (OFDM) is made for vehicle to vehicle wireless communications. The physical layer standard of the WAVE system is very similar to that of the IEEE802.1la wireless local area network (WLAN). Therefore, the performance of the WAVE system is degraded by continual timing delay in the WAVE multipath fading channels after starting initial timing synchronization. In this paper, the tracking algorithm that synchronizes symbol timing is proposed to continually compensate additional timing delay. Computer simulation of the proposed algorithm is performed in the worst communication environments that apply to maximum timing delay. Computer simulation shows that the proposed algorithm can improve the system performance in various channel conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.365-377
• /
• 2006

We define the incomplete medium sharing system as a multi-channel shared medium communication system where any types of constraints are imposed to the set of channels that may be allocated to any transmitter-receiver node pair. A set of distributed MAC schemes are proposed, all of which are based on the CSMA/CA scheme employed in IEEE 802. 11 WLAN standards. Distributed MAC schemes are proposed in three different forms, which can be differentiated by the number and the location of back-off timers; that is, (1) one timer for all queues destined for different receiver nodes, (2) multiple timers at individual transmission queues, (3) multiple timers for individual channels. Through an extensive set of computer simulations, the performances of the proposed MAC schemes show that the MAC scheme with timers at individual transmission queues outperform the others in terms of throughput and delay for most cases considered. The complexity of the proposed schemes is also compared, and the first scheme obviously turned out to be the simplest, and the complexity of the second and third schemes depends on the number of receiver nodes and the number of channels, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.7
• /
• pp.553-563
• /
• 2013

When the IEEE 802.11 wireless LAN-based broadcasting services, we use broadcast packets to broadcast multimedia contents to a large number of users using limited wireless resources. However, broadcast transmission is difficult to recover the loss packets compared with unicast transmission. Therefore, analysis of packet loss characteristics is required to perform efficient packet recovery. The packet loss in wireless transmissions is often bursty with high loss data rate. Even if loss patterns have the same average packet loss, they are different in the recovery rate of random loss and burst loss depending on the nature. Therefore, the analysis and research of the nature of the loss are needed to recover loss packets considering bursty characteristics. In this paper, we experimented Wi-Fi broadcast transmission according to transmission rate and analyzed bursty characteristics of loss patterns using 4-state markov model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.90-99
• /
• 2009

In this paper, we proposed the new class-E frequency multiplier design that include the highest efficient characteristics. The proposed frequency multiplier is designed for 5.8[GHz] output using the frequency multiplier about 2.9[GHz] input signal. And studying in this paper is for the design and the implementation of the class E frequency multiplier. For the result, the maximum highest efficient characteristics 32[%] which is with output power 24.5[dBm] and 8.5[dB], is shown with frequency multiplier for the 2.9/5.8[GHz] class E. And we applied the linear method to the implemented class E frequency multiplier. As a result, the output spectrum for the linear is upgrade to 12[dB], 12[dB], 13[dB] of the ACPR characteristics on the +11[MHz], +20[MHz], +30[MHz] offset frequency in the center frequency. The result is satisfied with the 3.83[%] of the lineared EVM for the 64-QAM modulated method with the 54[Mbps] transmission velocity. In this paper, we show that the good compensation result of the linearity and the efficiency through the digital pre-linear method of the distortion with the frequency multiplier. Therefore, we suggested the frequency multiplier method are applying to WLAN, cellular, PCS, WCDMA, and etc.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.91-96
• /
• 2006

High efficiency switching mode circuits such as class I amplifiers have been well known in the MHz frequency range. The class E amplifier is a type of switching mode amplifier offering very high efficiency approaching 100%. In this paper, the class E amplifier has been designed by using the harmonic balance method of circuit simulator. The designed amplifier is realized by using pHEMT and microstrip line, shows 66% power added efficiency (PAE) at 2.4GHz with 17.6dBm output power. With -3dBm input power of wireless LAN, measured output spec01m can meet the required IEEE 802.11g standard spectrum mask. That means the required amplifier back off of 9dB from $P_{ldB}$ to satisfy the required wireless LAN spectrum mask.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.15-21
• /
• 2015

Due to the appearance of various mobile terminals like smartphone, smartpad, and smartwatch and tremendous development of WiFi technology, data utilization rate on WiFi network is significantly increasing. As a result, users are wanting to use WiFi network using only a simple identification at a visited place as if they are at their home institute. In this paper, we review the domestic status of eduroam service which supports global extension of wireless network access environment and present the future development perspective of the service in Korea. Besides, we shed light on the current status of WiFi sharing service between domestic universities and propose some methods to facilitate the join of domestic universities in eduroam service.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.152-156
• /
• 2006

기존의 가정용 건강측정기는 기기만이 독립적으로 사용되거나 기기로부터 생체정보를 전송 받아 로컬 컴퓨터에서만 처리하는 시스템이 주를 이루었다. 본 논문에서는 가정용 건강측정기 중 혈당측정기를 적외선 통신(Infrared Communication, IrDA)으로 PocketPC에 연결하여 혈당정보를 전송받는다. 이러한 정보를 PocketPC용 CDMA(Code Multiple Access) 확장 팩을 이용하여 문자메시지(Short Message Service, SMS)로 다른 휴대폰에 전송하고, 무선 랜(WLAN, IEEE 802.11)을 이용하여 웹서버에 있는 게시판에 건강측정정보를 자동 등록 하여 정보를 공유할 수 있는 시스템을 구축하였다. 특히 비공개된 혈당측정기의 프로토콜을 분석하여 통신에 사용하였으며, API(Application Programming Interface)를 제공하지 않는 CDMA 확장팩 시스템의 사용자용 프로그램을 IPC(Inter Process Communication)를 이용한 제어를 통해 필요한 태스크를 수행하는 기법을 사용하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.390-392
• /
• 2015

IEEE 802.11 DCF(Distributed Coordination Function) 프로토콜은 이진 지수 백오프 방식을 사용한다. 단말은 데이터 전송 전에 충돌을 피하기 위해 일정한 시간동안 채널 휴지(Idle)를 기다린다. 데이터 전송이 성공하면 경쟁 윈도우 값을 두 배로 증가시키고 실패하면 최소 값으로 초기화 한다. 이를 통해 DCF는 충돌을 회피하지만 단말의 수가 증가함에 따라 충돌율은 증가하고 전체 네트워크 성능은 저하된다. 본 논문에서는 이 문제를 해결하기 위해 예약 방식을 통한 데이터 전송 방법을 제안한다. 제안된 방법에서 채널 시간을 예약 구간과 경쟁 구간으로 나눈다. 기본적으로 경쟁 구간에서 단말들은 DCF와 마찬가지로 경쟁 방식을 통해 데이터를 전송할 때 예약 구간에 대한 채널 예약을 AP에게 요청한다. 또한 예약 구간에서 데이터를 전송한 단말은 다음 예약 구간에서의 예약을 요청한다. AP는 채널 예약을 수행한다. 채널 예약에 성공한 단말은 예약 구간에서 비경쟁 방법으로 데이터 패킷을 전송한다. 따라서 DCF의 충돌율을 낮추고 전체적인 네트워크 성능을 향상시킨다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.8
• /
• pp.623-631
• /
• 2013

Wireless LAN (WLAN) interface is one of the major sources drastically depleting the battery power of mobile devices such as smartphones and tablets. Most commercial mobile devices employ a power saving technique putting their WLAN interface into a sleep state when there is no network traffic, and thereby, save the battery power. However, since an access point (AP) just transmits the packet(s) received from a server to the corresponding mobile device immediately, it may cause a problem that the mobile device constantly remains in an awake state so that its battery power is rapidly drained. In this paper, we point out this problem and propose a new scheme that can save the mobile device's battery power with an adaptive packet scheduling at the AP side. From the experimental results based on a testbed, we found that the proposed scheme outperforms existing schemes over 50% in terms of power saving.

• Journal of KIISE:Information Networking
• /
• v.37 no.4
• /
• pp.272-283
• /
• 2010

Wireless Mesh Networks (WMNs) have gained a lot of attention recently. Based on the characteristic of WMNs as a highly connected wireless infrastructure, many efforts from research organizations are made in order to improve the performance of the flow throughput in WMNs. Therefore, it is very critical issue to establish efficient routing paths for multiple concurrent ongoing flows. In this paper, we propose a general modeling methodology to analyze the end-to-end throughput of multiple concurrent flows by analytical calculation taking into account the carrier sensing behaviors, interference and the IEEE 802.11 Distributed Coordination Function mechanism. After the comparison of the average service time for each successful transmission at each node, we analyze the bottlenecks of flows, and hence obtain the maximum end-to-end throughput of them. By using our proposed model, it is possible to predicate the throughput of several candidate routing paths for multiple concurrent ongoing data flows, so we can select the most efficient route that can achieve the highest throughput. We carry out simulations with various traffic patterns of multiple flows in WMNs to validate our modeling and our efficient route selection mechanism.