• Journal of Korean Institute of Industrial Engineers
• /
• v.36 no.2
• /
• pp.94-100
• /
• 2010

The reliable multicast MAC (Medium Access Control) protocol is needed to guarantee the recipients' nonerroneous reception of the multicast data frames, which can be transmitted by the AP (Access Point) in infrastructure mode IEEE 802.11 wireless LANs. Enhancing the BMMM (Batch Mode Multicast MAC) protocol, in the literature, the connectivity-based reliable multicast MAC protocol was proposed to reduce the RAK (Request for ACKnowledgement) frame transmissions and enhance the multicast MAC performance. However, the number of necessary RAK frame transmissions increases as the number of multicast recipients increases. To alleviate the problem of the larger number of RAK frame transmissions with the larger number of multicast recipients, we propose the clustering algorithm for partitioning the recipients into a small number of clusters, so that the recipients are connected each other within the same clusters. Numerical examples are presented to show the reliable multicast MAC performance improvement by the clustering algorithm.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.1
• /
• pp.18-23
• /
• 2009

The conventional channel selection method for a ZigBee communication network basically detects the energy values in all channels. In the ISM band, no license is required to use channels in this band, so there may exist various interference factors in this band. It is well known that WLAN is the major interference factor degrading the performance of ZigBee in the ISM band. In this paper, we propose an efficient channel selection algorithm which uses the pattern of two types of WLAN channel uses as the a priori information of IEEE 802.11 band IEEE 802.11g. By using the proposed algorithm, we may save the time required to select channels for the ZigBee communications.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.2
• /
• pp.237-245
• /
• 2007

In this paper, a modified PCF (Point Coordination Function) MAC (Medium Access Control) Protocol is proposed to support the multiple direct link communication between STAs (STAtions) in infrastructure mode IEEE 802.11 wireless LANs. By the proposed MAC protocol, the direct link communication between STAs, which are located within the communication range of each other, is allowed without the use of AP (Access Point) as a relay. Moreover, when multiple direct data communication between STAs can be simultaneously performed with a sufficiently small interference, multiple simultaneous direct link communication is allowed for the efficient use of radio bandwidth. AP polls STAs to grant the transmission opportunities using the direct link communication by transmitting the polling frames to STAs. An efficient polling method for granting the transmission opportunities to STAs is proposed to reduce the number of the polling frame transmissions and enhance the PCF MAC performance.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.326-329
• /
• 2008

현재 IEEE 802.11p 규격은 기존의 IEEE 802.11a 규격을 기반으로 하여 표준화가 진행되고 있다. 기존의 IEEE 802.11a 규격은 무선랜 (WLAN: Wireless Local Area Network) 규격으로서 고속으로 이동하는 차량 통신환경 즉 WAVE (Wireless Access for Vehicular Environment) 환경에 그대로 작용할 경우 수신 성능이 급격히 떨어지게 되 는 문제점이 있다. 본 논문에서는 긴 훈련 심볼 (LTS: Long Training Sequence)을 이용하는 기존의 채널 추정 기법을 기반으로 하되 WAVE 채널처럼 빠르게 변화하는 채널에 대응하기 위해 일정한 심볼 주기 마다 미드엠블 (Mid-Amble)을 삽입하는 전송구조를 제안한다. 또한, 미드엠블 사이의 심볼들의 위상과 크기를 3차원 스플라인 보간법을 적용하여 추정하는 알고리듬을 제안한다. 제안된 알고리듬의 성능실험을 위해 WAVE 채널을 모델링하였으며 이러한 채널에서 성능실험을 수행하였다. 실험결과에 의하면 제안된 알고리듬은 빠른 시변 채널에서도 매우 우수한 성능을 나타냄을 알 수 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.304-306
• /
• 2008

CSMA/CA를 기반으로 하는 IEEE 802.11 무선랜의 MAC에서는 데이터 전송을 제어하기 위한 방법으로 DCF와 PCF를 사용한다. CSMA/CA는 스테이션간의 충돌을 줄이기 위해서 임의의 백오프 시간을 각 스테이션의 경쟁윈도우(Contention Window) 범위에서 결정한다. 스테이션은 패킷 전송 후 충돌이 발생하면, 윈도우 크기를 두 배로 증가시키며, 패킷을 성공적으로 전송하면 윈도우 크기를 최소 경쟁 윈도우(Minimum Contention Window)로 감소한다. DCF는 경쟁 스테이션이 적은 상황에서는 비교적 우수한 성능을 보이나 경쟁 스테이션의 수가 많은 경우 처리율, 패킷지연 관점에서 성능이 저하되는 문제점이 있다. 본 논문에서는 IEEE 802.11 MAC 계층 DCF 방식에서 최소 경쟁 윈도우의 값이 포화수율 및 패킷지연에 미치는 영향을 시뮬레이션에 의해 분석한다.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.191-194
• /
• 2003

In IEEE 802.11b, Medium Access Control Sublayer consists of DCF (Distributed Coordination Function) and PCF (Point Coordination Function). DCF provides contention based services and PCF provides contention free services for QoS satisfaction. DCF uses CSMA/CA (Carrier Sense Multiple Access/Collision Avoidance) as an access protocol. And PCF uses Polling Scheme. In this paper, a modified New-PCF, which gives weights to channels with heavier traffic load, was suggested. NS-2 simulations were conducted to compare the service performances with original DCF, PCF and the modified New-PCF respectively. Simulation results has shown the increased overall throughput with the proposed New-PCF compared with other cases.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2262-2269
• /
• 2016

In IEEE 802.11 wireless LANs, when a source node with low data rate occupies the channel resource for a long time, network performance degrades. In order to improve performance, the cooperative communication has been proposed. In the previous cooperative communication protocols, relay nodes deliver data packets only for a source node. In this paper, we propose an additional transmission scheme in which relay nodes select an additional source node based on several information and deliver data packets for the original source node and the selected additional source node. The proposed scheme improves performance and provides fairness among source nodes. Performance of the proposed scheme is investigated by simulation. Our results show that the proposed scheme outperforms the previous protocol in terms of fairness index and throughput.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1201-1204
• /
• 2004

Mobile IPv6는 IP기반 3계층에서 하부 기술에 독립적으로 이동성을 제공하여 차세대 망에서 글로벌 로밍을 쉽게 지원 할 수 있다. 그러나 핸드오프 과정 중에 각 계층마다 생기는 지연은 피할 수 없는 부분 요소 이다. 본 연구에서는 2계층의 IEEE 802.11 기술을 기반으로 하는 Mobile IPv6 환경에서 이동 인터넷 사용자들에게 끊김 없는 서비스의 제공, 핸드오프 지연의 최소화, 신뢰성 있는 보안성의 제공을 위하여 Mobile IPv6를 위한 핸드오프와 AAA서비스 인증 절차의 성능 향상 방안을 제시하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2A
• /
• pp.188-194
• /
• 2007

In order to become ubiquitous world, the compatibility of wireless machines has become the significant characteristic of a communication terminal. Thus, SDR is the most necessary technology and standard. However, among the environment which has different communication protocol, it's difficult to make a terminal with only hardware using ASIC or SoC. This paper suggests the processor that can accelerate several communication protocol. It can be connected with main-processor, and it is specialized PHY layer of network The C-program that is modeled with the wireless protocol IEEE802.11a and IEEE802.11b which are based on widely used modulation way; OFDM and CDM is compiled with ARM cross compiler and done simulation and profiling with Simplescalar-Arm version. The result of profiling, most operations were Viterbi operations and complex floating point operations. According to this result we suggested a co-processor which can accelerate Viterbi operations and complex floating point operations and added instructions. These instructions are simulated with Simplescalar-Arm version. The result of this simulation, comparing with computing only one ARM core, the operations of Viterbi improved as fast as 4.5 times. And the operations of complex floating point improved as fast as twice. The operations of IEEE802.11a are 3 times faster, and the operations of IEEE802.11b are 1.5 times faster.

• Journal of KIISE:Information Networking
• /
• v.32 no.3
• /
• pp.391-403
• /
• 2005

Several nv6 mobility support protocols for mobile Internet services are proposed in IETP : Mobile Ipv6, Hierarchical Mobile Ipv6, and Fast Handovers over Mobile Ipv6. Recently, IEEE 802.11 network has also been widely deployed in public areas for mobile Internet services. In the near future, IPv6 mobility support over IEEE 802.11 network is expected to be a key function to actualize the All If-based mobile various services. For appropriate application of these protocols, the IPv6 mobility support protocols should be analyzed according to their characteristics in terms of signaling, handover latency, lost packets, and required buffer sire as well as the impact of lower layer such as IEEE 802.11 network. In this paper, we analyze the performance of the protocols over IEEE 802.11 network. We define a packet-level traffic model, a network system model, and a mobility model. From these models, we construct a framework for the performance analysis. We also make cost functions to formalize each protocol's performance. Lastly, we analyze the effect of varying parameters used to show diverse numerical results, and compare with each other. From the analysis results, it is concluded that each Protocol has contrary or contrastive advantages with other Protocols, so there is no protocol that holds a dominant position.