• 정보교육학회논문지
• /
• 제10권3호
• /
• pp.425-434
• /
• 2006

본 연구에서는 초등학교 아동들의 효과적인 ICT 소양교육을 위한 방안으로 정보통신기술교육 지침서에서 제시한 학습 내용을 분석하여 체계적인 수준별 교육과정으로 재구성하는 데 중점을 두고, 창의적 재량시간을 통하여 학생 개개인의 수준을 고려하여 자기 주도적으로 학습할 수 있는 수준별 웹 코스웨어를 설계 및 구현하였다. 웹 코스웨어의 학습내용은 '컴퓨터 이해하기', '마우스와 자판', '인터넷 여행'으로 구성하였으며, 각 학습내용에 대한 진단평가 및 형성평가를 제공하여 평가 결과에 따라 초급, 중급, 고급의 수준별 학습을 할 수 있도록 구성하였다. 본 웹 코스웨어는 ICT 소양교육을 위한 학습자 중심의 수준별 학습 활동을 체계적으로 제공함으로써 ICT 소양 능력 향상을 위한 자기 주도적 기초 학습 자료로 활용될 수 있을 것으로 기대된다.

• 마이크로전자및패키징학회지
• /
• 제29권2호
• /
• pp.99-105
• /
• 2022

칩사이즈가 작아짐에 따라 선폭 또한 미세화되면서 인터커넥션의 밀집정도가 증가하고 있다. 그로 인해 캐패시터 층과 전기전도층의 저항 차이로 인해 RC delay가 문제되고 있다. 이를 해결하기 위해서는 높은 전기전도도의 전극과 낮은 유전율의 유전체 개발이 요구된다. 본 연구에서는 PCB (Print Circuit Board)의 회로를 외부요인으로부터 보호하는 상용 PSR (photo solder resist)과 우수한 내열 및 저유전 특성을 보유한 PI (polyimide)를 혼합하여 저유전체 잉크 개발을 진행하였다. 그 결과 PSR과 PI를 10:3으로 혼합한 잉크가 가장 우수한 결과를 보였으며 20 GHz와 28 GHz에서 각각 유전 상수 약 2.6, 2.37을 보였고, 유전손실은 약 0.022, 0.016으로 측정되었다. 차후 어플리케이션 적용 가능성 검증을 위해 테프론에 제작된 다양한 선폭의 전송선로에 평가하였으며 그 결과, PSR만 사용했을 때보다 PI와 혼합한 저유전체 잉크를 사용한 전송선로의 손실이 S21에서 평균 0.12 dB 덜 감소한 결과를 보였다.

• 한국지구과학회지
• /
• 제25권7호
• /
• pp.595-603
• /
• 2004

본 연구는 여러 종류의 ICT 활용 수업자료 중 WBI 수업자료, CD-ROM 타이틀 그리고 ICT 활용 수업모듈 수업자료가 과학 학업성취 및 자기 주도적 학습특성과 창의력에 미치는 효과를 알아보고자 하는 것이다. 이를 위하여 초등학교 과학 ‘지구’ 분야의 단원에 대하여 세 가지 자료를 활용하여 수업을 실시하고 그 효과를 분석하였다. 그 결과, WBI 수업자료, CD-ROM 타이틀 수업자료와 ICT 활용 수업모듈을 활용한 수업은 과학 학업성취, 자기 주도적 학습특성, 창의력을 변화시키는데 효과적인 것으로 나타났다. WBI 수업자료는 자기 주도적 학습특성을 변화시키는데 효과적이며, ICT 활용 수업모듈 수업자료는 창의력을 향상시킨 것으로 나타났다.

• 한국정밀공학회지
• /
• 제31권7호
• /
• pp.577-583
• /
• 2014

In this study, we introduce how to apply "Information and Communication Technology (ICT) to injection molding system. We report the current state of IT technology applied to produce their products in micro lens injection molding system. And we explain key technology of ICT for injection molding system and how to implement. Especially, we also mention about an embedded controller, also called as "M2M device". It provides programmable intelligent functions, communication, various interfaces, amplifier functions and mobile device connection to our application.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.486-494
• /
• 2019

Recently, the interest in marine leisure activities has been growing rapidly with the work-life balance trend. In response to this demand, the Korean government is supporting fostering and revitalizing the relevant industries and facilities. In particular, a marina has been making efforts to change itself into a resort with multiple amenities instead of a simple mooring facility. However, the facilities in a marina for the transport of marine leisure equipment mostly consist of cranes and boat-lifts using ropes, which can result in incidents such as damage and accidents during lifting or movement. This paper proposes the equipment and support system for the safe transportation of marine leisure ships. Aluminum transport equipment was designed by performing a structural analysis to achieve a lighter weight than the existing steel products. In addition, a safety support system with alarms for tilting or obstacles and a slope monitoring system was developed to enhance the safety during operation and transportation. The safety support system developed in this study was implemented and installed in the transport system, and verified through commissioning on land.

• 한국재료학회지
• /
• 제33권5호
• /
• pp.205-213
• /
• 2023

This paper reports the results of an experimental examination using X-rays to test annealing materials for lapped bearing steel (STB2), to confirm the validity of the weighted averaging analysis method. The distribution behavior for the α_𝜓-sin²𝜓 diagram and the presence or absence of differences in the peak method, half-value breadth method, and centroid method were investigated. When lapping the annealed bearing steel (STB2) material, a residual stress state with a non-directional steep gradient appeared in the surface layer, and it was found that the weighted averaging analysis method was effective. If there is a steep stress gradient, the sin²𝜓 diagram is curved and the diffraction intensity distribution curve becomes asymmetric, resulting in a difference between the peak method, half-value breadth method, and centroid method. This phenomenon was evident when the stress gradient was more than 2~3 kg/mm²/㎛. In this case, if the position of the diffraction line is determined using the centroid method and the weighted averaging analysis method is applied, the stress value on the surface and the stress gradient under the surface can be obtained more accurately. When the stress gradient becomes a problem, since the curvature of the sin²𝜓 diagram appears clearly in the region of sin²𝜓 > 0.5, it is necessary to increase the inclination angle 𝜓 as much as possible. In the case of a lapping layer, a more accurate value can be obtained by considering 𝜎₃ in the weighted averaging analysis method. In an isotropic biaxial residual stress state, the presence or absence of 𝜎₃ can be determined as the presence or absence of strain for sin²𝜓≈0.4.

• 한국재료학회지
• /
• 제34권7호
• /
• pp.330-340
• /
• 2024

Al-Mg-Si alloys are light weight and have excellent corrosion resistance, and are attracting attention as a liner material for high-pressure hydrogen containers in hydrogen fuel cell vehicles. Because it has excellent plastic hardening properties, it is also applied to car body panel materials, but it is moderate in strength, so research to improve the strength by adding Si-rich or Cu is in progress. So far, the authors have conducted research on the intergranular fracture of alloys with excessive Si addition from the macroscopic mechanical point of view, such as specimen shape. To evaluate their impact tensile properties, the split-Hopkinson bar impact test was performed using thin plate specimens of coarse and fine grain alloys of Al-Mg-X (X = Cr,Si) alloy. The effect of the shape of the specimen on the characteristics was studied through finite element method (FEM) analysis. As a result, it was found that the intergranular fracture of the alloy with excessive Si depended on the specimen width (W)/grain size (d), which can be expressed by the specimen size and grain size. As W/d decreases, the intergranular fracture transforms into a transgranular fracture. As the strain rate increases, the fracture elongation decreases, and the fracture surface of the intergranular fracture becomes more brittle. It was confirmed that intergranular fracture occurred in the high strain rate region even in materials with small grain sizes.

• 대한가정학회지
• /
• 제40권7호
• /
• pp.69-82
• /
• 2002

The objective of this study was to develop a Web based learning environment for Home Economics Education(HEE) using ICT (Information & Communication Technology). For the study, the following procedures were performed: 1) the review of literature, 2) development of teaming environment and questionnaires based on Web for HEE using ICT. The Web based learning environment was investigated and designed, and evaluated by the users. The problems indicated through the evaluation were revised and complemented. In addition, 13 sets of Learning questionnaires, which were verified using the same procedure as above, were developed to provide problem solving ability through the Web based learning environment. Learning environment based on the Web entitled "Together with the classroom of HEE" has a main menu, which is composed of rooms for HEE, students, teachers, various topics, recommendation sites, chatting, and e-mail. A room for HEE, in which teaming activity mainly occurs by following the sequences of learning procedures, includes other sub-rooms for the guidance of Loaming, discussion, directories for reference, question and answer, submission of homework, evaluation, and an encyclopedia. Therefore, this study implicates: 1) achievement of teaming environment using the ICT mainly made by students who solve problems closely related to daily life, 2) development of practical learning questionnaires fitted in the present state, 3) preparation for the curriculum. Finally, from this study, I suggested that further studies are needed to develop models for learning, interaction between students and teachers, and the learning materials under the Web based loaming environment.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.709-714
• /
• 2019

In order to observe the microstructure and morphology of porous titanium -oxide thin film, deposition is performed under a higher Ar gas pressure than is used in the general titanium thin film production method. Black titanium thin film is deposited on stainless steel wire and Cu thin plate at a pressure of about 12 Pa, but lustrous thin film is deposited at lower pressure. The black titanium thin film has a larger apparent thickness than that of the glossy thin film. As a result of scanning electron microscope observation, it is seen that the black thin film has an extremely porous structure and consists of a separated column with periodic step differences on the sides. In this configuration, due to the shadowing effect, the nuclei formed on the substrate periodically grow to form a step. The surface area of the black thin film on the Cu thin plate changes with the bias potential. It has been found that the bias of the small negative is effective in increasing the surface area of the black titanium thin film. These results suggest that porous titanium-oxide thin film can be fabricated by applying the appropriate oxidation process to black titanium thin film composed of separated columns.

• 한국재료학회지
• /
• 제31권3호
• /
• pp.172-180
• /
• 2021

In this study, using the plasma spray method, tensile and compression fatigue tests are performed in saline solution to examine the effect of Ti undercoat on corrosion fatigue behavior of alumina-coated specimens. The alumina-coated material using Ti in the undercoat shows better corrosion fatigue strength than the base material in the entire stress amplitude range. Fatigue cracking of UT specimens occurs in the recess formed by grit-blasting treatment and progresses toward the base metal. Subsequently, the undercoat is destroyed at a stage where the deformation of the undercoat cannot follow the crack opening displacement. The residual stress of the UT specimen has a tensile residual stress up to about 100 ㎛ below the surface of the base material; however, when the depth exceeds 100 ㎛, the residual stress becomes a compressive residual stress. In addition, the inside of the spray coating film is compressive residual stress, which contributes to improving the fatigue strength characteristics. A hardened layer due to grit-blasting treatment is formed near the surface of the UT specimen, contributing to the improvement of the fatigue strength characteristics. Since the natural potential of Ti spray coating film is slightly higher than that of the base material, it exhibits excellent corrosion resistance; however, when physiological saline intrudes, a galvanic battery is formed and the base material corrodes preferentially.