• 전자공학회논문지 IE
• /
• v.47 no.1
• /
• pp.34-40
• /
• 2010

Even if use ICS repeater in radio communication system, distance between Donor antenna and Service antenna though do much isolation degree must that shortcoming have. Proposed IP antenna to supplement this shortcoming in this paper. Result Doner antenna and isolation of Service antenna that measure through examination do 1.5m and when did direction 180 degree, Isolation confirmed that is measured 110dB. Confirmed that can unuse ICS repeater through this result and service by general RF repeater.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.390-396
• /
• 2021

In this research, design and fabrication of marine repeater capable to extend communication coverage in monitoring system of fishing gear automatic identification, which is one of implementation method of the real-name electric fishing gear system declared by Ministry of Oceans and Fisheries in 2016, is reported. The proposed marine repeater is fabricated in a form of RF repeater with interference cancellation system (ICS), which can cancel the oscillation due to feedback signal between service antenna and link antenna. In design process, we secure the isolation of 30 dB between service antenna and link antenna. It is confirmed that when the level of feedback signal into repeater input be lower of 15 dB than repeater gain, error vector magnitude due to oscillation can be lower than the performance criterion of 6%, from the test verification. It is expected that the service coverage will be extended by applying the developed marine ICS RF repeater into marine IoT network including monitoring system of fishing gear automatic identification.

• Journal of Broadcast Engineering
• /
• v.21 no.1
• /
• pp.97-104
• /
• 2016

In this paper, in order to relieve the area of terrestrial DTV broadcasting, we watch the same channel DTV Repeater output ICS using nano field test and analysis of effect was proven. Interspersed throughout the blanket area(natural) and buildings(artificially) 7 established the field selected as the test area, and each station(KBS1, KBS2, MBC, SBS, EBS) Extremely Low Power ICS Repeater the same channel of the receiving field strength and after install, SNR(Signal to Noise Ratios) verify the equipment to measure the efficacy and minimal output for future ICS type nav should you wish to provide a research-based for the spread.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.110-116
• /
• 2013

The amplification rate of a RF repeater is limited by the feedbacked signals from the same repeater. And an ICS (Interference Cancellation System) repeater has been developed to remove the feedbacked signals. The ICS repeater estimates the amplitudes and the phases of the feedbacked signals and removes the estimated feedback signals from the received input signal of the repeater. However, it requires lots of hardware complexity and this leads to the increase the cost of the repeater. Moreover, the ICS repeater can not solve the pilot pollution problems. To solve these problems, we have studied the implementation and adaptation of smart antenna system for RF repeaters. We have designed a smart antenna system with a switching beam structure in order to reduce the hardware and computational complexity. After analyzing the proposed smart antenna system, we found out that the amplification rate of the proposed repeater increases 23dB compare to the amplification rate of ICS repeater and the output SINR increases 6dB compare to the ICS repeater.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1252-1263
• /
• 2009

In this paper, in order to improve a service quality and to broaden the service coverage in the mobile communication system a study on a digital RF repeater employed with an Interference Cancellation System(ICS) is performed. The digital RF repeater employed with an ICS is implemented to remove interference and feedback signals which are disadvantages of a conventional(or general) RF repeater. This thesis presents the design and experiments of the new wireless repeater. The proposed wireless repeater consists of a RF repeater mounted with digital engine. The digital ICS engine consists of a DSP and FPGA. The digital engine and RF circuit are designed into a one-piece. After developing hardware through the digital platform they are also designed and fabricated into a one-piece in order to apply a best performance repeater system. The method of removing interference and feedback signals is an adaptive IF technique employed with a LMS algorithm. The powerful performance and fast convergence speed is obtained by using this method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.1
• /
• pp.95-103
• /
• 2009

We improve the performance of WCDMA repeater by cancelling the feedback interference radio signal under the fixed point implementation. Floating-point DSP or FPGA to implement the ICS algorithm may have an disadvantage of high cost, To solve this problem, we suggest the ICS algorithm based on LMS under fixed point operation, and show the validity of our results by comparing with the floating-point results through numerical simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.867-873
• /
• 2016

Even if ICS(Interference Cancellation System) repeater is used in wireless communication system, it has the disadvantage that it must have enough distance between Donor and Service antenna to be isolated. In this paper, new ICS repeater integrated antenna with high insolation characteristics is designed. The proposed antenna is fabricated for 800MHz and measured. Bandwidth and gain are optimized by changing the stub lengths near main patch and power divider, and also by changing the size of parasitic patch. The fabricated antenna has a return loss less than -13 dB, a gain over 3 dBi, and an isolation between the donor and the server antennas less than -56 dB from 824~894 MHz for CDMA mobile communication. Therefore, the proposed antenna structure can be applied to eliminate the shadow area and to expand the coverage area for any other wireless communication bands.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.75-76
• /
• 2016

Even if ICS(Interference Cancellation System) repeater is used in wireless communication system, it has the disadvantage that it must have enough distance between Donor and Service antenna to be isolated. In this paper, new ICS repeater integrated antenna with high insolation characteristics is designed. The proposed antenna is fabricated for 800MHz and measured. Bandwidth and gain are optimized by changing the stub lengths near main patch and power divider, and also by changing the size of parasitic patch. This antenna has a return loss less than -13 dB, a gain over 3 dBi, and an isolation between the donor and the server antennas less than -56 dB from 824~894 MHz for CDMA mobile communication. Therefore, the proposed antenna structure can be applied to eliminate the shadow area and to expand the coverage area for any other wireless communication bands.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.145-150
• /
• 2013

In the paper, we propose a new CSS(Complex Signed-Signed) CMA(Constant Modulus Algorithm) algorithm for ICS(Interference Cancellation System). When the repeater get the feedback signal, the CSS CMA algorithm is proposed at the ICS repeater using DSP(Digital Signal Processing) for the removal of interfering signals from the feedback paths. The proposed CSS CMA algorithm improved performances and hardware complexity by adjusting step size values. the steady state MSE(Mean Square Error) performance of the proposed CSS CMA algorithm with step size of 0.00043 is about 4dB better than the conventional CMA algorithm. And the proposed Complex Signed Signed CMA algorithm requires 1950 ~ 2150 less iterations than the LMS(Least Mean Square) and Signed LMS(Normalized Least Mean Square) algorithms at MSE of -25dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.661-668
• /
• 2012

In this paper, a dual-fed small ICS repeater antenna with high isolation is designed, fabricated, and measured. Bandwidth and gain are optimized by changing the stub lengths near main patch and power divider, and also by changing the size of parasitic patch. To improve the isolation characteristic of the antenna, a dual-feeding method is applied in designing the antenna. The fabricated antenna has a VSWR less than 2, a gain over 7 dBi, and an isolation between the donor and the server antennas less than -65 dB from 1,920~2,170 MHz for 3G mobile communication.