• 방사성폐기물학회지
• /
• 제21권1호
• /
• pp.43-53
• /
• 2023

Sulfide concentrations critically affect worker safety and the integrities of underground facilities, such as deep geological repositories for spent nuclear fuel. Sulfide is highly sensitive to oxygen, which can oxidize sulfide to sulfate. This can hinder precise measurement of the sulfide concentration. Hence, a literature review was conducted, which revealed that two methods are commonly used: the methylene blue and sulfide ion-selective electrode (ISE) methods. Inductively coupled plasma optical emission spectroscopy (ICP-OES) was used for comparison with the two methods. The sulfide ISE method was found to be superior as it yielded results with a higher degree of accuracy and involved fewer procedures for quantification of the sulfide concentration in solution. ICP-OES results can be distorted significantly when sulfide is present in solution owing to the formation of H₂S gas in the ICP-OES nebulizer. Therefore, the ICP-OES must be used with caution when quantifying underground water to prevent any distortion in the measured results. The results also suggest important measures to avoid problems when using ICP-OES for site selection. Furthermore, the sulfide ISE method is useful in determining sulfide concentrations in the field to predict the lifetime of disposal canisters of spent nuclear fuel in deep geological repositories and other industries.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.489-497
• /
• 2011

The proposed method for an effective assay of Cd, Cr and Pb in several polymer samples has been validated. The determination was carried out using ICP-OES after a high pressure asher (HPA) digestion at pressure and temperatures up to 13 MPa and $320^{\circ}C$, respectively. Polymer based materials were totally oxidized with nitric acid in a HPA chamber and determined by ICP-OES. Validation parameters such as linearity, matrix effect, limit of dectection (LOD), limit of quantitation (LOQ), accuracy and precision (repeatibility, intermediate precision and reproducibility) were assessed. The LOD and LOQ in the sample were ranged from 0.98 to 1.18 mg $kg^{-1}$ and 2.93 to 3.55 mg $kg^{-1}$, respectively, relying on the analyte. The proposed method had a good accuracy and precision for repeatability, intermediate precision with respect to days and analysts and reproducibility expressed as inter-laboratory study. The developed method was simple to use, suitable and applicable to various kinds of polymers.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.88-88
• /
• 2003

Optical Emission Spectroscopy(OES) is a very important technology for real-time monitoring of plasma in a reactor during dry etching process. OES technology is non-invasive to the plasma process. It can be used to collect information on excitation and recombination between electrons and ions in the plasma. It also helps easily diagnose plasma intensity and monitor end-point during plasma etch processing. We studied high density planar inductively coupled BCl$_3$ and BCl$_3$/Ar plasma with an OES as a function of processing pressure, RIE chuck power, ICP source power and gas composition. The scan range of wavelength used was from 400 nm to 1000 nm. It was found that OES peak Intensity was a strong function of ICP source power and processing pressure, while it was almost independent on RIE chuck power in BCl$_3$-based planar ICP processes. It was also worthwhile to note that increase of processing pressure reduced negatively self-induced dc bias. The case was reverse for RIE chuck power. ICP power and gas composition hardly had influence on do bias. We will report OES results of high density planar inductively coupled BCl$_3$ and BCl$_3$/Ar Plasma in detail in this presentation.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.804-808
• /
• 1998

The inductively coupled plasma(ICP) etching of platinum with BCl$_3$/Cl$_2$ gas chemistry has been studied. X-ray photoelectron spectroscopy (XPS) was used to investigate the chemical binding states of the etched surface. The plasma characteristics was extracted from optical emission spectroscopy (OES) and a single Langmuir probe. In this case of Pt etching using BCl$_3$/Cl$_2$ gas chemistries, the result of OES and Langmuir probe showed the increase of Cl radicals and ion current densities in the plasmas with increasing Cl$_2$ gas ratio. At the same time, XPS results indicated that the intensities of Pt 4f decreased with increasing Cl$_2$ gas ratio. The decrease of Pt 4f intensities implies the increase of residue layer thickness on the etched Pt surface.

• 한국식품위생안전성학회지
• /
• 제32권5호
• /
• pp.343-347
• /
• 2017

건강기능식품에서 이산화규소 분석 방법을 확립하기 위하여 산(불산과 붕산)분해를 이용한 ICP-OES 방법을 수행하였다. 이 방법의 검출한계와 정량한계는 각각 0.07 mg/L, 0.20 mg/L 이었다. 검량선은 0.2~20.0 mg/L의 농도범위에서 우수한 직선성($r^2$ 0.99)을 보였다. 글루코사민 제품에 이산화규소 0.4, 1.0, 2.0% (w/w)를 첨가하여 시험한 결과 90.22~94.14%의 회수율과 0.72~1.67%의 정밀성을 나타내었다. 확립된 방법으로 시중에 유통되는 건강기능식품 11품목의 이산화규소 함량을 분석한 결과 0.02~1.80% (w/w)로 나타났다. 이 결과는 건강기능식품에 이산화규소의 사용기준 2% (w/w) 이하를 만족하는 결과로 시험한 제품들은 규격에 적합하였다. 따라서 본 연구에서 확립된 이 방법은 건강기능식품 중 이산화규소를 쉽고, 빠르게 분석할 수 있으며, 건강기능식품 중 이산화규소 함량 분석에 효율적으로 사용될 수 있다.

• Corrosion Science and Technology
• /
• 제12권5호
• /
• pp.215-219
• /
• 2013

Aluminum alloy(3003) can be dissolved during hydration process with hot tap water. In order to increase the stability of aluminum alloy, it was pretreated with anodization and phosphoric acid before hydration process. The effect of pretreatment on the surface property changes was analyzed with X-ray Photoelectron Spectroscopy (XPS) and Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES) and their results supported that the increase of hydroxyl group (-OH) on the surface formed during anodization and phosphorous acid treatment prevented the dissolution of aluminum alloy during hydration process at high temperature.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.69-75
• /
• 2014

Accurate analysis of fly ash particles is not trivial because of complex nature in physical and chemical properties. SPLITT fractionation (SF) was employed to fractionate the fly ash particles into subpopulations in large quantities. Then the SF-fractions were analyzed by the steric mode of sedimentation field-flow fractionation (Sd/StFFF) for size analysis. The SF-fractions were also analyzed by ICP-OES. The results showed that the fly ash is mainly composed of Fe, Ca, Mg and Mn. No particular trends were observed between the particle size and the concentrations of Fe, Ca, Mg, while Mn, Cu and Zn were in higher concentrations in smaller particles. Sample preparation procedures were established, where the fly ash particles were sieved to remove large contaminants, and then washed with acetone to remove organics on the surface of particles. The sample preparation and analysis methods developed in this study could be applied to other environmental particles.

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.320-326
• /
• 2004

We have extracted the natural pine-needles to use ethanol in solvent, and could obtain the refined oil component from pine-needles extract. We have tested the antimicrobial effect from microbe experiment and analyzed with ICP/OES, GC/MS. we could obtain the next conclusion from the result of this experiment. In the first result of this experiment we could know that in case of increasing concentration of pine-needles, the number of microbe decreased more and more. Also we could know that the refined oil component of pine-needles appeared the sterilization effect of S-aureus and E-coli after 96hrs and 120hrs. So we could know that the refined oil component of appeared effect to microbe. In the second result of this experiment we could know that inorganic materials of Ca, Mg, V, Mn etcs from pine-needles detected to ICP/OES analysis and the aromatic compounds from refined oil component of pine-needles was certificated to GC/MS analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.209-212
• /
• 2001

Polyimide(PI) films have been considered as the interlayer dielectric materials due to low dielectric constant, low water absorption, high gap-fill and planarization capability. The PI film was etched with using inductively coupled plasma (ICP). The etching characteristics such as etch rate and selectivity were evaluated to gas mixing ratio. High etch rate was 8300$\AA$/min and vertical profile was approximately acquired 90$^{\circ}$ at CF$_4$/(CF$_4$+O$_2$) of 0.2. The selectivies of polyimide to PR and SiO$_2$ were 1.2, 5.9, respectively. The etching profiles of PI films with an aluminum pattern were measured by a scanning electron microscope (SEM). The chemical states on the PI film surface were investigated by x-ray photoelectron spectroscopy (XPS). Radical densities of oxygen and fluorine in different gas mixing ratio of 07CF4 were investigated by optical emission spectrometer (OES).

• 분석과학
• /
• 제12권5호
• /
• pp.447-459
• /
• 1999

용접 흄에 존재하는 6가 크롬의 분석방법을 평가하기 위하여 깨끗한 PVC여과지와 용접 흄 매트릭스의 여과지에 일정량의 6가 크롬과 3가 크롬을 첨가한 후 NIOSH 7600 및 7604의 알카리 추출방법, 마그네슘 첨가방법, 아세트산 나트륨 완충액 추출로 전처리를 하여 분광광도계(DPC), 유도결합플라스마-광학발광분석법(ICP-OES), 이온크로마토그래피(IC)로 분석하였다. 위 전처리 방법은 모두 부적절하여 새로운 방법으로 알카리 용액상에서 초음파 추출하는 방법을 제안하였다. NIOSH에서 추천하는 2% NaOH/3% $Na_2CO_3$ 추출방법은 6가 크롬만 있을 때 적합하고 3가 크롬이 있으면 일부가 6가 크롬으로 산화된다. 산화 경향은 용접 흄이 있을 때 크게 나타났다. 분광광도계를 이용한 diphenylcarbazide방법은 저농도와 고농도의 6가 크롬이 있을 때 부적합하고 알카리 추출을 하면 ICP-OES분석방법이나 IC분석방법이 적합하다. 용접 흄 중 6가 크롬을 전처리하는 방법으로 NIOSH 방법의 $135^{\circ}C$로 가열하는 대신 초음파처리를 하면 3가의 6가로의 산화를 훨씬 억제할 수 있다. 즉, 2% NaOH/3% $Na_2CO_3$로 초음파처리를 60분 이내에 실시하여 IC 또는 ICP-OES(또는 AAS)로 측정하면 된다.