• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.319-320
• /
• 2008

본 연구에서는 대기압하에서 고품질의 산화막 증착을 목적으로 TEOS(Tetraethyl Orthosilicate)를 이용하여 APCVD법(Atmospheric Pressure CVD)으로 실리콘 산화막을 증착하고 하였으며, 특성 비교를 위하여 ICP-CVD를 이용하여 $SiH_4$ 와 $N_2O$ source gas를 이용하여 산화막을 증착하였다. 트랜지스터 제작후 Semiconductor measurement system을 이용하여 TFT의 전기적 특성을 측정 하였으며, 결과적으로 유기 사일렌을 사용한 경우 보다 우수한 전기적 특성을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.850-852
• /
• 1998

SiC thin film have been prepared by ICP-CVD for low temperature deposition and large area deposition. The structural properties of deposited SiC films are characterized by employing SEM, FT-IR, XRD, XPS and Raman Spectroscopy. From the experimetal results, good crystallinity has been achieved in $1000^{\circ}C$ grown SiC film which have carbonization step at $1100^{\circ}C$ for substrate bias of 30V.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2008년도 추계학술대회 초록집
• /
• pp.51-52
• /
• 2008

결정화된 아나타이즈와 루타일 구조의 $TiO_2$ 박막을 유도결합플라즈마 화학기상증착법 (ICP-CVD)을 이용하여 증착하였다. 기판 온도는 플라즈마에 의한 가열에 의하여 최대 450K까지 증가하였다. 일반적인 플라즈마 화학기상증착법 (PE-CVD)으로 결정화된 $TiO_2$ 박막을 얻기 위해서는 최소 573K까지 가열해야 하기 때문에, 현 실험에서의 $TiO_2$ 박막은 플라즈마 가열에 의한 것이 아니라 높은 플라즈마 밀도에 의하여 증착된 것이다. 증착속도는 외부가열이 없는 상태에서 $5{\sim}50nm$/min이 얻어졌다. ICP 파워 (RF power)는 결정화도, 루타일상의 증착, 증착속도 그리고 광전류 특성에 영향을 끼쳤다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.253-253
• /
• 2012

Low temperature SiOx film process has being required for both silicon and oxide (IGZO) based low temperature thin film transistor (TFT) for application of flexible display. In recent decades, from low density and high pressure such as capacitively coupled plasma (CCP) type plasma enhanced chemical vapor deposition (PECVD) to the high density plasma and low pressure such as inductively coupled plasma (ICP) and electron cyclotron resonance (ECR) have been used to researching to obtain high quality silicon oxide (SiOx) thin film at low temperature. However, these plasma deposition devices have limitation of controllability of process condition because process parameters of plasma deposition such as RF power, working pressure and gas ratio influence each other on plasma conditions which non-leanly influence depositing thin film. In compared to these plasma deposition devices, neutral beam assisted chemical vapor deposition (NBaCVD) has advantage of independence of control parameters. The energy of neutral beam (NB) can be controlled independently of other process conditions. In this manner, we obtained NB dependent high crystallized intrinsic and doped silicon thin film at low temperature in our another papers. We examine the properties of the low temperature processed silicon oxide thin films which are fabricated by the NBaCVD. NBaCVD deposition system consists of the internal inductively coupled plasma (ICP) antenna and the reflector. Internal ICP antenna generates high density plasma and reflector generates NB by auger recombination of ions at the surface of metal reflector. During deposition of silicon oxide thin film by using the NBaCVD process with a tungsten reflector, the energetic Neutral Beam (NB) that controlled by the reflector bias believed to help surface reaction. Electrical and structural properties of the silicon oxide are changed by the reflector bias, effectively. We measured the breakdown field and structure property of the Si oxide thin film by analysis of I-V, C-V and FTIR measurement.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2002년도 제22회 학술발표회 초록집
• /
• pp.129-129
• /
• 2002

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.440-442
• /
• 2000

We have successfully fabricated SiC Schottky diodes using Al, Ni, Ti metallization systems. Schottky barrier height and other parameter have been measured by using I-V and C-V technique. The measured barreir heights depend on the metal and measurement techniques used. The barrier heights were 1.85eV(Al), 1.63eV(Ni), 0.97eV(Ti). The Ideality factors were 1.16(Al), 1.07(Ni), 1.05(Ti). Thermal stress tests were performed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.168-169
• /
• 2005

실온에서 디스플레이 응용을 위하여 ICP CVD로 PET기판 위에 실리콘 산화 반사 방지막을 성장시키고, EDXA로 분석하였다. 분광 Ellipsometer, UV-V와 FTIR분광기를 이용하여 반사율을 3%이하까지 낮출 수 있다는 것을 확인하였고, SEM장비를 이용하여 표면 상태를 알아보았으며. Essential Macleod 광학디자인 프로그램을 이용한 시뮬레이션 결과와 일치함을 확인하였다. 본 연구결과를 이용하면 다층박막 대신 단층 반사방지막을 제작하여 경제적이고, 효과적인 반사방지막을 제작할 수 있다.

• 한국표면공학회지
• /
• 제38권2호
• /
• pp.60-64
• /
• 2005

The ICP-CVD (inductively coupled plasma chemical vapor deposition) process was applied to the deposition of $TiB_2$ films. For plasma generation, 13.56 MHz r.f. power was supplied to 2-turn Cu coil placed inside chamber. And the gas mixture of $TiCl_4,\;BCl_3,\;H_2$ and Ar was used for $TiB_2$ deposition. $TiB_2$ films with high hardness (<40 GPa) were obtained at extremely low deposition temperature $(250^{\circ}C)$, and the films hardness increased with ICP power and gas flow ratio of $TiCl_4/BCl_3$. The film structure was changed from (100) preferred orientation to random orientation with increasing RF power. It is supposed that the enhanced hardness of films was caused by a strong Ti-B chemical bonding of stoichiometric $TiB_2$ films and film densification induced by high density plasma.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2005년도 제29회 학술발표회 초록집
• /
• pp.39-39
• /
• 2005

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1574-1576
• /
• 2003

Carbon nanotubes (CNTs) were grown on the TiN-coated silicon substrate with different thickness of Ni and Co catalysts layer at $600^{\circ}C$ using inductively coupled plasma-chemical vapor deposition (ICP-CVD). The Ni and Co catalysts were formed using the RF magnetron sputtering system with various deposition times. It was found that the growth of CNTs was strongly influenced by the surface morphology of Ni and Co catalysts. With increasing deposition time, the thickness of catalysts increased and the grain boundary size of catalysts increased. The surface morphology of catalysts and CNTs were elucidated by SEM. The Raman spectrum further confirmed the graphitic structure of the CNTs. The turn-on field of CNTs grown on Ni and Co catalysts was about 2.7V/pm and 1.9V/pm respectively. Field emission current density of CNTs grown on Ni and Co catalysts was measured as $11.67mA/cm^2$ at $5.5V/{\mu}m$ and $1.5mA/cm^2$ at $5.5V/{\mu}m$ respectively.