• Title/Summary/Keyword: I-O analysis

Search Result 1,590, Processing Time 0.031 seconds

A Kinematic Analysis of Uchi-mata(inner thigh reaping throw) by Kumi-kata types in Judo (유도 맞잡기 타입에 따른 허벅다리걸기의 Kinematic 분석[I])

  • Kim, Eui-Hwan;Cho, Dong-Hee;Kwon, Moon-Seok
    • Korean Journal of Applied Biomechanics
    • /
    • v.12 no.1
    • /
    • pp.63-87
    • /
    • 2002
  • The purpose of this study was to analyze the kinematic variables when Uchi-mata(inner thigh reaping throw) performing by Kumi-kata(engagement position, basic hold) types A, B(A: grasping part-behind neck lapel, B: chest lapel) in Judo with three dimensional analysis technique DLT method by videography. The subjects were four male judokas who have been training in Yong-In University(YIU), on Korean Representative level and Uchi-mata is their tokui-nage(favorite technique), the throwing form was filmed on two S-VHS 16mm video camera( 30frame/sec. Panasonic). Kinematic variables were temporal, posture, and COG. The data collection was performing by Uchi-mata. Six good trials were collected for each condition (type A, B) among over 10 trials. The mean values and the standard deviation for each variable were obtained and used as basic factors for examining characteristics of Uchi-mata by Kumi-kata types. The results of this analysis were as follows : 1) Temporal variables The total time elapsed(TE) by Uchi-mata of types A, B were 1.45, 1.56 sec. respectively. Types A shorter than B. 2) Posture variables In performing of Uchi-mata, the range of flexion in type A, left elbow was $45^{\circ}$ and B was $89^{\circ}$ from Event 2(E2) to Event 6(E6). Type A and B were quite different in right elbow angle in Event1(E1). Left shoulder angle of type A was extended and type B was flexed in E4. Both types right shoulder angles were showed similar pattern. Also both hip angles(right/left) were showed similar pattern. When type A performed Uchi-mata the knee-angle of supporting foot showed $142^{\circ}$in the 1st stage of kake phase[KP], and extended to $147^{\circ}$in the 2nd stage of KP. And the foot-ankle angle of supporting foot showed $83^{\circ}$in the 1st stage of KP, and extended to $86^{\circ}$in the 2nd stage of KP. moreover, The knee angle of attacking foot showed $126^{\circ}$in the 1st stage of KP, and extended to $132^{\circ}$in the 2nd stage of KP, and the foot-ankle angle of attacking foot showed $106^{\circ}$in the 1st stage of KP, and extended to $121^{\circ}$in the 2nd stage of KP. When type B performed Uchi-mata the knee-angle of supporting foot showed $144^{\circ}$in the 1st stage of KP, and extended to $154^{\circ}$in the 2nd stage of KP. And the foot-ankle angle of supporting foot showed $83^{\circ}$in the 1st stage of KP, and extended to $92^{\circ}$in the 2nd stage of KP. moreover, The knee angle of attacking foot showed $132^{\circ}$in the 1st stage of KP, and extended to $140^{\circ}$in the 2nd stage of KP, and the foot-ankle angle of attacking foot showed $103^{\circ}$in the 1st stage of KP, and extended to $115^{\circ}$in the 2nd stage of KP. During Uchi-mata performing, type A showed pulling pattern and type B showed lift-pulling pattern. As Kumi-kata types, it were different to upper body(elbow, shoulder angle), but mostly similar to lower body(hip, knee, ankle angle) on both types. 3) C. O. G. variables When the subjects performed Uchi-mata, COG of type A, B up and down in vertical aspect was 71cm, 73.8cm in height from the foot in the 2nd stage of KP. As Kumi-kata types, it were different on medial-lateral direction aspect but weren't different in Kuzushi phase on vertical direction aspect.

A clinical study of allergic rhinitis (알레르기 비염에 관한 임상적 연구)

  • 채병윤
    • The Journal of Korean Medicine
    • /
    • v.21 no.3
    • /
    • pp.149-165
    • /
    • 2000
  • As recent developments of Immunology and Nuclear medicine, serum IgE and IgG values are helpful in the diagnosis and evaluation of the therapeutic effects of nasal allergies. But in Korea, air pollution and the increased use of food additives have become leading factors in nasal allergies, It seems to be induced by environmental change, especially industrialization and urbanization, so allergic rhinitis in our environment has changed in accordance with the changes made in the living environment. Therefore this study is attempted in order to observe a clinical analysis which places more importance on allergic rhinitis. We studied 200 patients who had visited Kyunghee Oriental Medical Center with allergic rhinitis from January 1, 1999 to December 31, 1999 The results were as follows: 1. The sex distribution was 114 males(57%) and 86 females(43%). In age distribution, the average age was 25. In males, ages ranged from 3 to 66 years old and the average was 23.81. In females, ages ranged from 4 to 67 years old and the average was 28.57. The peak age was 30~39 years old(24%); under 9 years old and 10~19 years old were each 18%; 20~29 years old was 22%; 40~49 years old was 11 %; over 50 years old 6.5%. The gulf between males and females showed a statistically significant difference(P<0.025). 2. In the age of onset, male' s maximum was 62.5, minimum was 0.25; female s maximum was 59.5, minimum was 0.2. Under 9 years old was the most with 34%(male 24%, female 10%), 10~19 years old was 18%, 20~29 years old was 22.5%, 30~39 years old was 13.50%, over 40 years old was 12%, The gulf between males and females were showed statistically significant difference.(p<0.014) 3. The average duration of the disease was 5.67 years. In male and female, the maximum was 30, the minimum was 0.05; under 5 years old was the most with 62%(male 34.50%, female 27.50%); 6~10 years old was 23%. So, under 10 years old was 85%. There was no statistically significant difference in the duration of disease. 4. Regarding type of residence, 47.50% of patients with allergic rhinitis lived in apartments, 52.50% lived in houses. In males, 29.50% lived in apartments, 27.50% lived in houses. In females, 18% lived in apartments, 25% lived in houses. There was no statistically significant difference in the residence by T-test and chi-test. 5. In the distribution of season, spring is the most with 29.5% of patients, winter 28%, fall 25.5%, and summer 17%. But there was no statistically significant difference. 6. After observing 200 patients with allergic rhinitis, classifying main symptoms into 5 types, sneezing was the main symptom in 177cases(88.50%), nasal obstruction in 176cases(88%), rhinorrhea in 169cases(84.5%), post nasal discharge in 87cases(43.50%), and itching in I04cases(52%). The Cumulus ration is 98.50% and symptoms overlapped with an average 3.57±0.1 times but in an analysis of variance of these symptoms, the gulf between males and females was not recognized as statistically significant by T-test and ANOVA. 7. Patients whose families have allergic diseases account for 90 cases(45%) : 49cases(24.50%) male and 41cases(20.50%) female. There were 4 cases (71.11 %) whose families have allergic rhinitis, 9cases(10%) of asthma, and 7.78% with allergic dermatitis. There were 61 (67.80%) cases of patients whose parents have allergic diseases; cases wherein the patient s child had allergic diseases numbered 13 (14.45%); and cases with a sibling with allergic diseases totalled 16cases (17.80%). There was no statistically significant difference in allergic disease regarding sex, parents, or siblings by chi-test. 8. Blood type: For males, type A is the most common, with 37cases(18.5%), followed by type B with 32cases(16%), type O 28cases(l4%) and type AB 13cases(6.5%). For females, type B is the most common, with 30cases(15%), followed by type O with 23cases(l1.5%), type A with 18cases(9%) and type AB with 13cases(6.5%). There was no statistically significant difference in blood type by chi-test. 9. In the selection of prefered food, most patients prefer cool food, with 98 such cases(49%), tepid food in 54cases(27%) and warm food in 48cases(24%). These showed a statistically significant difference in the selection of prefered food between males and females by chi-test(p<0.009). 10. The state of Past History was classified into II types. chronic hypertrophic rhinitis is the most common with 11cases (18.64%), tonsil and adenoid hypertrophy is 8cases(l3.56%), sinusitis is 6cases(10.17%), nasal septum deviation is 4cases, nasal polyp is 2cases, others are 10cases(l6.95%). No statistically significant difference in past history between males and females was shown, but a statistically significant difference was shown when males and females were compared with total cases by T-test(p<0.002, P<0.0008). 11. Regarding complications, 37 patients (28.91%) had sinusitis: 22cases(17.19%) in male, 15cases(11.72%) in female. Chronic hypertrophic rhinitis was found in 15cases(11.72%). Others are under 10%. There was no statistically significant difference in the type of complications between males and females, but a statistically significant difference was shown when males and females were compared with total cases by T-test(P<0.00l, P<0.007). 12. In the treatment, medication was used 1691 times, an average of 2.58 times. No.34 was used 370 times for 124 cases, an average of 2.98 times. No. 152 was used 318 times for 106 cases, an average of 3.00 times. No.151 was used 307 times for 97cases, an average of 3.16 times. No. 31 was used 117 times for 33 cases, an average of 3.55 times. No 25 was used 116 times for 33 cases, an average of 3.52 times. 13. In the duration of treatment, the most frequent is 1 week(69cases, 34.50%), the maximum is 20weeks, and the minimum is 1week. A treatment period of 2~3 weeks accounted for 32% of cases, a period of 4~5weeks accounted for 13.5%. The gulf between males and females showed a statistically significant difference in the duration of treatment.(p<0.01). There was a statistical significance when the males were compared with total cases by ANOVA(P<0.03). 14. A comparison between before-treatment and after-treatment showed a statistically significant difference in treatment by T-test (p<0.01) and F-test (p<0.0058).

  • PDF

Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy - (산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)-)

  • Lee, Sung-Yoon
    • Journal of the Korean Wood Science and Technology
    • /
    • v.2 no.4
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

A Study on Legal Issues with Airline Over-booking Practice (항공권 초과예약의 법률적 문제에 관한 연구)

  • Jeong, Jun-Sik;Hwang, Ho-Won
    • The Korean Journal of Air & Space Law and Policy
    • /
    • v.27 no.2
    • /
    • pp.143-166
    • /
    • 2012
  • This paper deals in depth with airline over-booking practices and legal questions therefrom in the light of public interests. Chapter I as an introduction gives clear ideas of what are the over-booking, fact-revealing current state of denied boarding and nature of the problems inherent but veiled in those practices. In Chapter II, it is reviewed whether legal instruments for DBC(Denied Boarding Compensation) are adequately equipped for airline passengers in R. O. K. Upon the results of the review that international law to which Korea is a party, domestic law and administrative preparedness for the DBC are either null or virtually ineffective, the Chapter by contrast illustrates how well the U. S. and the E. U. safeguard civil rights of their passengers from such an 'institutionalized fraud' as the over-booking. In Chapter III on which a main emphasis lies, it is examined whether the over-booking practice constitutes a criminal offense: Fraud. In section 1, the author identifies actus reus and mens rea required for fraud then compares those with every aspect of the over-booking. In conjunction with the structural element analysis, he reviews the Supreme Court's precedents that lead the section into a partial conclusion that the act of over-booking judicially constitutes a crime of fraud. Despite the fulfillment of drawing up an intended answer, the author furthers the topic in section 2 by arguing a dominant view from Korean academia taking opposite stance to the Supreme Court. The commentators assert, "To consummate a crime of fraud, there must be property damage of the victim." For this notion correlates with a debate on legally protected interest in criminalization of fraud, the section 2 shows an argument over 'Rechtgut' matters specific to fraud. The view claims that the Rechtgut comes down rather to 'right to property' than 'transactional integrity' or 'fair and equitable principles'. However, the section concludes that the later values shall be deemed as 'freedom in economic decision-making' which are the benefit and protection of the penal law about fraud. Section 3 demonstrates the self-contradiction of the view as it is proved by a conceptual analysis that the infringement on freedom in economic decision-making boils down to the 'property damage'. Such a notion is better grounded in section 4 by foreign court decisions and legislation in its favour. Therefore, this paper concludes that the airline's act of over-booking is very likely to constitute fraud in both theory and practice.

  • PDF

The Waveform and Spectrum analysis of Tursiops truncatus (Bottlenose Dolphin) Sonar Signals on the Show at the Aquarium (쇼 학습시 병코돌고래 명음의 주파수 스펙트럼 분석)

  • 윤분도;신형일;이장욱;황두진;박태건
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.36 no.2
    • /
    • pp.117-125
    • /
    • 2000
  • The waveform and spectrum analysis of Tursiops truncatus(bottlenose dolphin) sonar signals were carried out on the basis of data collected during the dolphin show at the aquarium of Cheju Pacificland from October 1998 to February 1999. When greeting to audience, the pulse width, peak frequency and spectrum level from the five dolphins'sonar signals were 3.0ms, 4.54kHz and 125.6dB, respectively. At the time of warm-up just before the show, their figures were 5.0㎳, 5.24kHz and 127.0dB, respectively. During the performance of dolphins, with singing, peak frequency ranged 3.28∼5.78kHz and spectrum level ranged 137.0∼142.0dB. With playing ring, pulse width, peak frequency and spectrum level were 7.0㎳, 2.54kHz and 135.9dB, and when playing the ball, the values were 9.0㎳, 2.78kHz and 135.2dB, respectively. The values determined from the five dolphins during jump-up out of water were : pulse width 2.0㎳, peak frequency 4.50kHz and spectrum level 126.8dB. When they responded to trainer's instructions, the values were 2.25㎳, 248kHz and 148.7dB, respectively, and greeting to audience, the peak frequency and spectrum level were 5.84kHz and 122.5dB. During swimming under water, peak frequency and spectrum level were determined to be 10.10kHz and 126.8dB. It was found that there exited close consistencies in pulse width, frequency distribution and spectrum level between whistle sounds and dolphin's sonar signals. Accordingly, the dolphins can be easily trained by using whistle sound based on the results obtained from the waveform and spectrum of the dolphin's sonar signals.

  • PDF

Verifying Execution Prediction Model based on Learning Algorithm for Real-time Monitoring (실시간 감시를 위한 학습기반 수행 예측모델의 검증)

  • Jeong, Yoon-Seok;Kim, Tae-Wan;Chang, Chun-Hyon
    • The KIPS Transactions:PartA
    • /
    • v.11A no.4
    • /
    • pp.243-250
    • /
    • 2004
  • Monitoring is used to see if a real-time system provides a service on time. Generally, monitoring for real-time focuses on investigating the current status of a real-time system. To support a stable performance of a real-time system, it should have not only a function to see the current status of real-time process but also a function to predict executions of real-time processes, however. The legacy prediction model has some limitation to apply it to a real-time monitoring. First, it performs a static prediction after a real-time process finished. Second, it needs a statistical pre-analysis before a prediction. Third, transition probability and data about clustering is not based on the current data. We propose the execution prediction model based on learning algorithm to solve these problems and apply it to real-time monitoring. This model gets rid of unnecessary pre-processing and supports a precise prediction based on current data. In addition, this supports multi-level prediction by a trend analysis of past execution data. Most of all, We designed the model to support dynamic prediction which is performed within a real-time process' execution. The results from some experiments show that the judgment accuracy is greater than 80% if the size of a training set is set to over 10, and, in the case of the multi-level prediction, that the prediction difference of the multi-level prediction is minimized if the number of execution is bigger than the size of a training set. The execution prediction model proposed in this model has some limitation that the model used the most simplest learning algorithm and that it didn't consider the multi-regional space model managing CPU, memory and I/O data. The execution prediction model based on a learning algorithm proposed in this paper is used in some areas related to real-time monitoring and control.

Clinical Analysis of the Acute Respiratory Distress Syndrome after Thoracotomy (개흉술 후 발생하는 급성 호흡부전 증후군에 대한 임상적 고찰)

  • 이용직;박승일;제형곤;박창률;김동관;주석중;김용희;손광현
    • Journal of Chest Surgery
    • /
    • v.35 no.9
    • /
    • pp.653-658
    • /
    • 2002
  • The cause and clinical course of the postoperative ARDS is, as of yet, not very well understood. The current study is a review of our experience on patients with ARDS after thoracotomy. Material and Method: Between Jan. 1996 to Aug. 2001, a retrospective analysis was conducted on 32 post-thoracotomy ARDS patients among 4018 patients receiving thoracotomy inclusive of thoracoscopic surgery. Result: The incidence of ARDS after pneumonectomy cases was 5.3%(13/245), 1.3% after lobectomy(9/ 710), and 4.4% after esophageal surgery(10/226). Of the 32 ARDS patients, 31 had malignant disease. The remaining 1 patient had aspergillosis. In the majority, the cause of ARDS was unknown. The average onset was on the 7.4th postoperative day. In 10 cases, the initial lesion was in the right lower lung field(31.2%), in the left lower lung field in 9(28.1%), and in both lower lung fields in 12(37.5%) cases. In all, the initial lesion was in the lower lung fields in 96.9% of the cases(31/32). There was a significant relationship between the development of ARDS and intraoperative I/O balance. The overall mortality rate was 65.6%(21/32). In the earlier period of the study(1996-Jun, 1998) the mortality rate was 100%, but in the latter period(July, 1998-Aug, 2001) it was significantly reduced to 47.6%: Conclusion: The current data showed a higher incidence of postoperative ARDS in patients with malignant disease and in those receiving extensive lymph node dissection with either lobectomy or pneumonectomy, and also in patients receiving esophageal surgery. In addition, introperative fluid overload was also associated with an increased incidence of ARDS. Treatment outcome could be improved with prone positioning and NO gas inhalation.

A Framework on 3D Object-Based Construction Information Management System for Work Productivity Analysis for Reinforced Concrete Work (철근콘크리트 공사의 작업 생산성 분석을 위한 3차원 객체 활용 정보관리 시스템 구축방안)

  • Kim, Jun;Cha, Heesung
    • Korean Journal of Construction Engineering and Management
    • /
    • v.19 no.2
    • /
    • pp.15-24
    • /
    • 2018
  • Despite the recognition of the need for productivity information and its importance, the feedback of productivity information is not well-established in the construction industry. Effective use of productivity information is required to improve the reliability of construction planning. However, in many cases, on-site productivity information is hardly management effectively, but rather it relies on the experience and/or intuition of project participants. Based on the literature review and expert interviews, the authors recognized that one of the possible solutions is to develop a systematic approach in dealing with productivity information of the construction job-sites. It is required that the new system should not be burdensome to users, purpose-oriented information management, easy-to follow information structure, real-time information feedback, and productivity-related factor recognition. Based on the preliminary investigations, this study proposed a framework for a novel system that facilitate the effective management of construction productivity information. This system has utilized Sketchup software which has good user accessibility by minimizing additional data input and related workload. The proposed system has been designed to input, process, and output the pertinent information through a four-stage process: preparation, input, processing, and output. The inputted construction information is classified into Task Breakdown Structure (TBS) and Material Breakdown Structure (MBS), which are constructed by referring to the contents of the standard specification of building construction, and converted into productivity information. In addition, the converted information is also graphically visualized on the screen, allowing the users to use the productivity information from the job-site. The productivity information management system proposed in this study has been pilot-tested in terms of practical applicability and information availability in the real construction project. Very positive results have been obtained from the usability and the applicability of the system and benefits are expected from the validity test of the system. If the proposed system is used in the planning stage in the construction, the productivity information and the continuous information is accumulated, the expected effectiveness of this study would be conceivably further enhanced.

Birth and Infant Death Reporting System via Computer Network (출생 및 영아사망 신고체계 및 전산정보체계 개발)

  • Park, Jung-Han;Lee, Young-Sook;Rhee, Jung-Ae;Cho, Hyun;Chung, Young-Hae;Park, Soon-Woo;Jun, Hae-Ri
    • Health Policy and Management
    • /
    • v.8 no.2
    • /
    • pp.125-148
    • /
    • 1998
  • Accurate vital statistics are essential for a national health planning and evaluation. Among various vital statistics, birth and death rates, and infant and matemal mortality rates together with the causes of death are the very basic ones for above purposes as well as for the maternal and child health management. These statistics are based on the birth and death reports. It is required by law to report every birth and death within one month after its occurrence. However, in case of a neonatal death occurring prior to the birth report, most of the birth and death are not reported. Thus accurate infant and maternal mortality rates are not available yet in Korea. The main objective of this study is to develop a birth and infant death reporting system via computer network. We designed a new birth report form based on the current form and data from the analysis of medical record forms of 14 hospitals. A new form is basically addition of essential medical information to the current birth report form. Since a revision of the rules and regulations related wtih the birth report is necessary to use a new form, we kept the current from intact to make it acceptable to the government office for a field trial. We also developed computer programs for data input for birth and death reports at a medical faciltiy, data processing for production of maternal and child health indices at a health center, and management of maternal and child health services including immunization and postantal care at health center. The birth certificate and birth report can be printed out at a medical facility. The computer packages were programmed by Borland Delphi 3.0 and can be run under Windows 95 system. We proposed a new birth and death reporting system via computer network after a field trial for data input, transmission, and processing. The medical and demographic data o birth and death at medical facilities will be sent to health centers directly via computer network. The health center will retain the medical data for analysis and forward only the data for birth and death reports required by current regulations to the Dong, Up, or Myun Office. Once the birth or death is reported via computer network to the Dong Office, then the Dong Office will notify the baby's mother of the birth report and request to submit the baby's name by mail. When the baby's name its submitted. the Dong Office will forward the birth reports to the Common Court and Statistics Agency in the same way as the current system, Upon the completion of birth registration of the Common Court, the court will issue the birth certificate to mother which will be used in lieu of the family record. The advantages of proposed birth and death reporting system via computer network ar as follows ; I) The accuracy, timing, and completeness of reporting will be improved and more accurate maternal and child health indices can be obtained, ii) The maternal and child health services of health center will be obtained, iii) Epidemiologic data for pregnancy and birth can be obtained, iv) Manpower for birth and death reporting will be saved.

  • PDF

QTL Analysis of Seed and Growth Traits using RIL Population in Soybean (콩 종실 및 생육형질 연관 분자표지 탐색)

  • Kim, Jeong-Soon;Song, Mi-Hee;Lee, Janf-Yong;Ahn, Sang-Nag;Ku, Ja-Hwan
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.53 no.1
    • /
    • pp.85-92
    • /
    • 2008
  • An RIL population from a Shinpaldalkong2/GC83006 cross was employed to identify quantitative trait loci (QTL) associated with agronomic traits in soybean. The genetic map consisted of 127 loci which covered about 3,000cM and were assigned into 20 linkage groups. Phenotypic data were collected for the following traits; plant height, leaf area, flowering time, pubescence color, seed coat color and hilum color in 2005. Seed weight was evaluated using seeds collected in 2003 to 2005 at Suwon and in 2005 at Pyeongchang and Miryang sites. Three QTLs were associated with 100-seed weight in the combined analysis across three years. Among the three QTLs related to seed weight, all GC83006 alleles on LG O ($R^2\;=\;12.5$), LG A1 ($R^2\;=\;10.1$) and LG C2 ($R^2\;=\;11.5$) increased the seed weight. A QTL conditioning plant height was linked to markers including Satt134 (LG C2, $R^2\;=\;25.4$), and the GC83006 allele increased plant height at this QTL locus. For two QTLs related to leaf area, 1aM on LG M ($R^2\;=\;10.0$) and laL on LG L ($R^2\;=\;8.6$), the Shinpaldalkong2 alleles had positive effect to increase the leaf area. Satt134 on LG C2 ($R^2\;=\;41.0$) was associated with QTL for days to flowering. Satt134 (LG C2) showed a linkage to a gene for pubescence color. Satt363 (LG C2) and Satt354 (LG I) were linked to the hilum color gene, and Sat077 (LG D1a) was linked to the seed coat color. The QTL conditioning plant height was in the similar genomic location as the QTLs for days to flowering in this population, indicating pleiotropic effect of one gene or the tight linkage of several genes. These linked markers would be useful in marker assisted selection for these traits in a soybean breeding program.