• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.388-398
• /
• 1998

In constructing fuzzy control systems. there are many parameters such as rule base. membership functions. inference m method. defuzzification. and I/O scaling factors. To control the system in properly using fuzzy logic. we have to consider t the correlation with those parameters. This paper deals with self-tuning of fuzzy control systems. The fuzzy controller h has parameters that are input and output scaling factors to effect control output. And we propose the looklongleftarrowup table b based self-tuning fuzy controller. We propose the PMTM(Plus-Minus Tuning Method) for self tuning method, self-tuning the initial look-up table to the appropriate table by adding and subtracting the values.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.3
• /
• pp.307-311
• /
• 2004

The objective of this work is to evaluate the hypothesis that a good technique for supplying oxygen to the saturated zone in the presence of light nonaqueous phase liquid (LNAPL) pool contamination at the water table is to pass air through the unsaturated zone above the pool. This hypothesis was evaluated in experimental studies performed using a bench-scale, sand-tank reactor, Steady-state abiotic experiments in the sand-tank reactor with air flowing through the reactor headspace demonstrated that oxygen supply through the water table interface into the saturated zone was enhanced when an LNAPL (dodecane) pool was present at the water table. These experimental results confirmed the hypothesis that an LNAPL pool can serve as a high concentration oxygen source to the oxygen-limited area beneath the pool and, as a result, enhance the in situ biodegradation rate.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.11a
• /
• pp.81-86
• /
• 1997

It is proposed, for fuzzy combustion control system of refuse incinerator to find the relationship between inputs and outputs and to generate rules to control by using rough set theory. It is not easy to find out the corresponding inputs for each output and the control rules with incomplete or imprecise information consisting expert knowledge, process and manipulator values in the field, and operation manual for the given system. Most decision problems can be formulated employing decision table formalism. A decision table on fuzzy combustion control system for refuse incinerator is simplified and produces control(rules). The I/O realtions and the control rules found by rough set theory are compared with the previous result.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.870-873
• /
• 2000

This investigation reports the grinding characteristics of quartz. Grinding experiments were performed at various grinding conditions including wheel mesh, table speed and depth of cut. The grinding forces and specific grinding energies were measured to compare the grindability of quartz with those of structural ceramics such as A1$_2$O$_3$, SiC, Si$_3$N$_4$ and ZrO$_2$. Surface roughness was also measured with tracer and the ground surfaces were observed with SEM. The chip formation energy of quartz was about 6J/㎣, which is quite smaller than those of structural ceramics. Although plastic flows are occured in Si$_3$N$_4$ and ZrO$_2$, micro/macro cracks are occured in ground surface of quartz like in A1$_2$O$_3$ and SiC.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.4
• /
• pp.215-225
• /
• 2010

The NAND flash memory based SSDs are considered to replace the existing HDDs. To maximize the I/O performance, SSD is composed of several NAND flash memories in parallel. However, to adopt the hybrid mapping scheme in SSD may cause degradation of the I/O performance. In this paper, we propose a new mapping scheme for the SSD called WADPM. WADPM loads only necessary mapping information into RAM and dynamically adjusts the size of mapping information in the RAM. So, WADPM avoids the shortcoming of page-level mapping scheme that requires too large mapping table. Performance evaluation using simulations shows that I/O performance of WADPM is 3.5 times better than the hybrid-mapping scheme and maximum size of mapping table of WADPM is about 50% in comparison with the page-level mapping scheme.

• Ocean and Polar Research
• /
• v.38 no.1
• /
• pp.59-70
• /
• 2016

Establishing the strategic plans to foster the oceans and fisheries (O&F) industry as an engine for national sustainable economic growth has become an important task for developing countries as well as developed countries. The first step to do so is to identify O&F industry and analyze its economic effects. Therefore, the prime purposes of the paper are two-fold. The first is to identify O&F industry and estimate its market size using 2012 Input-Output (I-O) table published by the Bank of Korea. The second purpose is to obtain some quantitative information on production-inducing effect, value-added creation effect, and employment-inducing effect of the O&F industry. To this end, we apply an IO analysis using exogenous specification of the O&F industry. The results show that the O&F industry covers 4.1% and 3.0% of national output and gross domestic product, respectively. Moreover, we found that 1.0 won of production or investment in the O&F industry induces 1.7363 won of production and 0.4759 won of value-added in the national economy. One billion won of production or investment in the O&F industry touches off 7.5569 persons of employment. This information can be utilized in the O&F industry-related policy-making.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.6
• /
• pp.523-530
• /
• 1999

This paper presents the on -line techniques of SHE-PvVI\I for GTO current source converter. The look-up t table is linearized with this proposed method so that the tum-on/off periods of the GTO switches can be c computed in real-time for any modulation index. This allows the rapid and continuous regulation of the DC O output current while producing the sinusoidal AC input current waveform and unity power factor. The l linearized S}lE-PW~I technique and the high power factor control scheme are Prolxlsed and their‘ performance i is tested analytically. The validity of this proposed technique is well verified through the simulation and e experimental results.

• Applied Biological Chemistry
• /
• v.3
• /
• pp.25-48
• /
• 1962

The polysaccharide C prepared from gum tragacanth powder (U. S. P. grade) by the precipitation method with 85% ethanol was a neutral polysaccharide, $[{\alpha}]^{30}_D-72.2$. The polysaccharide C consisted of L-rhamnose, D-xylose, L-arabinose and D-galactose in the molar ratio 2:1:17:9 (Table 1, 2, 3, ). The polysaccharide C was methylated with dimethylsulphate and 40% NaOH, and Purdies regent. The hydrolyzate of fully methlated product ($[{\alpha}]^{22}_D-102$ in chloroform, the methoxy content 40.6%) was composed of 2, 3, 5-tri-O-methyl-L-arabofuranose (I), 3,4-di-O-methyl-L-rhamnopyranose (II), 2,3-di-O-methyl-D-xylose (III), 2,3,4-tri-O-methyl-D-galactopyranose (IV), 2,4-di-O-methyl-L-arabopyranose (?), 2,4-di-O-methyl-D-galactose(VI), 2-O-methyl-D-arabinose (VII), and L-arabopyranose(VIII) (Table 4, 5, and Fig. 4). The first partial hydrolysis (A) of the polysaccharide C with 0.05N-HCl for 4.5 hours at $80-85^{\circ}C$ released only L-arabinose: the second hydrolysis (B) with 0.1N-HCl for 5 hours at $80-85^{\circ}C$, L-arabinose and D-galactose; and the third hydrolysis (C) with 0.3N-HCl at $90-95^{\circ}C$ in sealed tube, L-rhamnose, D-xylose, L-arabinose and D-galactose. From the unhydrolyzate A' were found L-rhamnose, D-xylose, L-arabinose, and D-galactose; from B' L-rhamnose, d-xylose, L-arabinose and D-galactose; and from C' D-xylose and D-galactose respectively (Table 6). The periodate consumption and formic acid production of the polysaccharide C were measured at various time intervals. After 120 hours periodat was consumed by 1.23 mole per $C_5H_8O_4$ and formic acid was produced 0.78 mole per $C_5H_8O_4$ (Table 7). Although a definite chemical structure for this polysaccharide C may not be formulated, experimental data, especially, from methylation, partial hydrolysie and determination of its molar ratio, and periodate analysis showed that the polysaccharide C is a highly branched polysaccharide and would be constructed of galactoaraban as a main chain residue and L-arabofuranose, D-galactopyranosyl $(1{\rightarrow}1)$-L-arabofuranose, D-xylopyranosyl $(1{\rightarrow}2)$-L-rhamnopyranosyl $(1{\rightarrow}1)$-L-arabofuranose, and L-rhamnopyranosyl $(1{\rightarrow}1)$-arabofuranose, and D-galactopyranosyl-$(1{\rightarrow}2)$-L-arabopyranosyl-$(1{\rightarrow}1)$-I-arabofuranose as a branch chain or end group (page 21).

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.99-110
• /
• 1999

This study deals with the adaptability questions of O-D table estimation models. Its objectives are two-fold; (1) to estimate the characteristics of various O-D table estimation models(i.e. linear regression models. entropy models and statistic models) and (2) to find the model which estimates the O-D table with the best accuracy under the various data conditions. In Pursuing the above, this study gives the particular attentions to the test of the models, using the Sioux Falls network and equilibrium assignment method of MINUTP. The major findings are the followings. Firstly. it finds that the statistic models have the most goodness of fat among all models, if the required data are all Prepared. But it Presents that statistic models are the most sensitive against the underspecification and inconsistency problems of link data. Secondly, It shows that the linear regression models have the worst goodness of fat among all models. But the linear regression models are the most insensitive to the underspecification and inconsistency problems. Thirdly, THE/1 model of entropy model is sensitive against the underspecification and incon-sistency problems, but THE/2 model is insensitive. Finally, other informations like total volume, zonal Production and attraction volumes in 0-D table, help models to gain the better goodness of fit. Especially, in the statistic models. both the zonal production and attraction volume data are helpful to estimate the link volumes. It can be expected that the results dive some implications not only to the selection of optimal model under the various given data, but also to the development or modification of model.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.2
• /
• pp.153-157
• /
• 2000

Hydrolysate which inhibit the Angiotensin I-converting enzyme (ACE) was prepared from mackerel muscle by pretense. The ACE inhibitory activity of mackerel muscle hvdrolysate (MMH) was $967 {\mu}g of IC_(50)$. ACE inhibitory peptides were isolated by ultrafiltration, gel permeation column chromatography (GPC), reversed phase column chromatography(RPC), reversed phasehigh performance liquid chromatography (RP-HPLC), and gel permeation high performance liquid chromatography (GP-HPLC) from the MMH. The amino acid sequence of the ACE inhibitory peptides was Tyr-Val-Ala. The $IC_(50)$ of this peptide for ACE from rabbit lung was $1.4 {\mu}M$.