• Title/Summary/Keyword: I chart

Search Result 229, Processing Time 0.035 seconds

Geometric charts with bootstrap-based control limits using the Bayes estimator

  • Kim, Minji;Lee, Jaeheon
    • Communications for Statistical Applications and Methods
    • /
    • v.27 no.1
    • /
    • pp.65-77
    • /
    • 2020
  • Geometric charts are effective in monitoring the fraction nonconforming in high-quality processes. The in-control fraction nonconforming is unknown in most actual processes; therefore, it should be estimated using the Phase I sample. However, if the Phase I sample size is small the practitioner may not achieve the desired in-control performance because estimation errors can occur when the parameters are estimated. Therefore, in this paper, we adjust the control limits of geometric charts with the bootstrap algorithm to improve the in-control performance of charts with smaller sample sizes. The simulation results show that the adjustment with the bootstrap algorithm improves the in-control performance of geometric charts by controlling the probability that the in-control average run length has a value greater than the desired one. The out-of-control performance of geometric charts with adjusted limits is also discussed.

Analysis of Production Process of Fine Size Fraction of Korean Kaolin by Ball Mill Grinding I (Ball Mill 분쇄에 의한 고령토의 미분성분 생성과정의 해석 I)

  • 심철호;김상필;서태수
    • Journal of the Korean Ceramic Society
    • /
    • v.23 no.4
    • /
    • pp.35-40
    • /
    • 1986
  • The production process of a fine size fraction of Korean kaolin by ball milling is studied in this paper by analyzing the size distribution the size distribution of products with the Rosin-rammle formular and the rate process of cumulative size fractions with Alyavdin-Chujyo's formular. The size distribution is found to be divided in three regions a coarser part influenced by feed size an intermediate part where the size distribution shows a clear straight line relationship on Rosin-Rammler chart and the finest part with the ultimate limit of fineness by ball milling. Alyavdin-Chujyo's relationship is found to be valid over a very wide range of milling conditions. For different feed sizes the Alyavdin-Chujyo's relationship gives a group of straight lines with a common intersection point which can be defined as the limiting point of the persistent component region.

  • PDF

Dynamic Analysis of a Rotating System Due to the Effect of Ball Bearing Waviness (I) -Vibration Analysis- (Waviness가 있는 볼베어링으로 지지된 회전계의 동특성 해석 (II)-안정성 해석 -)

  • Jeong, Seong-Weon;Jang, Gun-Hee
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.26 no.12
    • /
    • pp.2647-2655
    • /
    • 2002
  • This research presents an analytical model to investigate the stability due to the ball bearing waviness i n a rotating system supported by two ball bearings. The stiffness of a ball bearing changes periodically due to the waviness in the rolling elements as the rotor rotates, and it can be calculated by differentiating the nonlinear contact forces. The linearized equations of motion can be represented as a parametrically excited system in the form of Mathieu's equation, because the stiffness coefficients have time -varying components due to the waviness. Their solution can be assumed as a Fourier series expansion so that the equations of motion can be rewritten as the simultaneous algebraic equations with respect to the Fourier coefficients. Then, stability can be determined by solving the Hill's infinite determinant of these algebraic equations. The validity of this research is proved by comparing the stability chart with the time responses of the vibration model suggested by prior researches. This research shows that the waviness in the rolling elements of a ball bearing generates the time-varying component of the stiffness coefficient, whose frequency is called the frequency of the parametric excitation. It also shows that the instability takes place from the positions in which the ratio of the natural frequency to the frequency of the parametric excitation corresponds to i/2 (i=1,2,3..).

A Study about trends of using Shihogayonggolmoryo-tang granule (시호가용골모려탕 과립제의 임상경향 분석 및 활용)

  • Kim, Kyung-Soo;Kim, Woo-Chul;Kim, Kyeong-Ok
    • Herbal Formula Science
    • /
    • v.20 no.1
    • /
    • pp.159-166
    • /
    • 2012
  • Objectives : This study was carried out to investigate trends of using Shihogayonggolmoryo-tang granule on neuropsychiatry fields. And suggest that using herbal extracts change non-prescription medicine to prescription medicine. Methods : I researched 86 outpatients who treated with Shihogayonggolmoryo-tang granule at oriental medicine hospital. And I analyzed their medical records of chart review study. Results : 1. Average medication time in this research was 14.9 days and the main usage was supplementary to herbal medicine, such cases amounted to 62%. 2. There are 52 patients out of 86 who are much better, such cases amounted to 55%. 3. The improved diagnosis is Syndrome of heart-fire flaring up, Syndrome of upper energizer dryness-heat, headache, and tinnitus. The improved symptom is anxiety, headache, dizziness, tic disorders, and chest discomfort. Conclusions : I expect to using herbal extracts change non-prescription medicine to prescription medicine based on this study.

Evaluation for Rock Cleavage Using Distribution of Microcrack Spacings (III) (미세균열의 간격 분포를 이용한 결의 평가 (III))

  • Park, Deok-Won
    • The Journal of the Petrological Society of Korea
    • /
    • v.25 no.4
    • /
    • pp.311-324
    • /
    • 2016
  • The characteristics of the rock cleavage in Jurassic granite from Geochang were analysed. The evaluation for three quarrying planes and three rock cleavages was performed using the parameters such as (1) reduction ratio between the value of spacing and the value of length, (2) microcrack spacing frequency(N), (3) total spacing($1mm{\geq}$), (4) exponential constant(a), (5) magnitude of exponent(${\lambda}$), (6) mean spacing($S_{mean}$), (7) difference value($S_{mean}-S_{median}$) between mean spacing and median spacing($S_{median}$) and (8) density of spacing. Especially the close dependence between the above spacing parameters and the parameters from the spacing-cumulative frequency diagrams was derived. The discrimination factors representing three quarrying planes and three rock cleavages were acquired through these mutual contrast. The analysis results of the research are summarized as follows. First, the reduction ratios of frequency(N), mean value, median value, the above difference value($S_{mean}-S_{median}$) and density for three rock cleavages are in orders of G(grain, (G1 + G2)/2) < H(hardway, (H1 + H2)/2) < R(rift, (R1 + R2)/2), H < G $\ll$ R, H < G $\ll$ R, H < G < R and H < G $\ll$ R. The values of the above five parameters for three planes show the various orders of R'(rift plane) $\ll$ H'(hardway plane) < G'(grain plane), R' $\ll$ G' < H', R' < H' < G', R' < G' < H' and R' $\ll$ H' < G', respectively. Second, the values of (I) parameters(2, 3, 4 and 5) and (II) parameters(6, 7 and 8) are in orders of (I) H < G < R and (II) R < G < H. On the contrary, the values of the above two groups(I~II) of parameters for three planes show reverse orders. Third, to review the overall characteristics of the arrangement among the six diagrams, these diagrams show an order of R2 < R1 < G2 < G1 < H2 < H1 from the related chart. In other words, above six diagrams can be summarized in order of rift(R1 + R2) < grain(G1 + G2) < hardway(H1 + H2). These results indicate a relative magnitude of rock cleavage related to microcrack spacing. Especially, two parameters for each diagram, the above difference value($S_{mean}-S_{median}$) and mean spacing, could provide advanced information for prediction the order of arrangement among the diagrams. Finally, the general chart for three planes and three rock cleavages were made. From the related chart, three exponential straight lines for three rock cleavages show an order of R(R1 + R2) < G(G1 + G2) < H(H1 + H2). On the contrary, three lines for three planes show an order of H'(R2 + G2) < G'(R1 + H2) < R'(G1 + H1). Consequently, correlation of the mutually reverse order between three planes and three rock cleavages can be drawn from the related chart.

Voice Analysis and Treatment Result According to Configuration of Sulcus Vocalis (성대구증의 형태에 따른 음향학적 분석 및 치료 결과)

  • Yang, Ho Cherl;Jeong, Byoung Seo;Kim, Dong Young;Woo, Joo Hyun
    • Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
    • /
    • v.23 no.2
    • /
    • pp.119-123
    • /
    • 2012
  • Background and Objectives : Sulcus vocalis could be classified into type I, type IIa, and type IIb. There have been a little reports about voice quality and treatment results related with types of sulcus vocalis. The authors conducted an analysis of voice and treatment according to different types of sulcus vocalis. Materials and Methods : This study was based on a retrospective chart review. The sulcus types were classified into type I and type II. Objective and subjective voice assessments were analyzed. Patients were treated individually with voice therapy, percutaneous steroid injection, and injection laryngoplasty. Comparison was performed on the voice difference between type I group and type II group, and between pre-treatment and post-treatment of each types. Results : One hundred and one patients were enrolled into this study, and 49 patients were type I and 52 patients were type II. Type I group showed longer mean maximal phonation time (MPT) than type II group, although other voice parameters didn't show any difference between two groups. Even after the management, almost all of the voice parameters didn't show improvement except MPT of type II group. Conclusion:Although the type I sulcus has been known as a non-pathologic lesion, it can result in some degree of voice change and discomfort, and thus need an active management. In this study, voice therapy, percutaneous steroid injection, and injection laryngoplasty showed limited effect to the both types of sulcus vocalis. Further studies for management of sulcus vocalis were needed.

  • PDF

Growth hormone treatment for children with mucopolysaccharidosis I or II

  • Minji Im;Chiwoo Kim;Juyoung Sung;Insung Kim;Ji-Hoon Hwang;Min-Sun Kim;Sung Yoon Cho
    • Journal of Genetic Medicine
    • /
    • v.20 no.2
    • /
    • pp.60-69
    • /
    • 2023
  • Purpose: Despite enzyme replacement therapy (ERT) and/or allogeneic hematopoietic stem cell transplantation, individuals with mucopolysaccharidosis (MPS) I or II often experience significant growth deficiencies. This study aimed to assess the safety and efficacy of recombinant human growth hormone (hGH) treatment in children diagnosed with MPS I or II. Materials and Methods: A total of nine pediatric patients-four with MPS I and five with MPS II-underwent treatment with ERT and hGH at Samsung Medical Center. Results: The mean hGH dose administered was 0.26±0.03 mg/kg/week. In the MPS I group, three patients showed an increase in height Z-score from -4.09±0.83 to -3.68±0.43 after 1 year of hGH treatment, and to -3.10±0.72 by the end of the hGH regimen. In the MPS II group, while the height Z-score of four patients decreased according to standard growth charts, it improved from 1.61±1.79 to 2.71±1.68 based on the disease-specific growth chart through hGH treatment. Two patients discontinued hGH treatment due to lack of efficacy after 22 and 6 months each of treatment, respectively. No new-onset neurological symptoms or necessity for prosthetic or orthopedic surgery were reported during hGH treatment. Conclusion: This study provides insights into the impact of hGH on MPS patients, demonstrating its potential to reverse growth deceleration in some cases. Further research is needed to explore the long-term effects of hGH on changes in body composition, muscle strength, and bone health in this population.

Defining Semantics of Live Sequence Chart Specification (Live Sequence Chart 명세언어의 의미론적 정의)

  • Lee, Eun-Young
    • Journal of the Korea Society of Computer and Information
    • /
    • v.11 no.6 s.44
    • /
    • pp.49-57
    • /
    • 2006
  • While developing a complex reactive software system. it is very important to analyze the user requirement and reflect it to the developed system. Therefore understanding the need of users precisely and promptly is the key to the successful software system development. Among several requirement specification languages, message sequence charts (MSCs), also known as sequence diagrams in UML are the most widely used scenario notation. Live Sequence Charts (LSCs) are a variant ot MSCs, characterized by its message abstraction facility and the modality of scenarios. In this paper, I define the formal semantics of LSC specification including the essential language constructs such as pre-charts, variables, assignment and conditions. The range of the formalized LSC language has been broadened, and the scope of the formalized semantics is much closer to the complete LSC specification.

  • PDF

A Study on the Knowledge-Based T.P.N. System (1) (지식 구조화 경정맥 완전 영양공급 시스템의 개발에 관한 연구 (I))

  • Jeon, Gye-Rok;Choe, Sam-Gil;Byeon, Geon-Sik
    • Journal of Biomedical Engineering Research
    • /
    • v.11 no.2
    • /
    • pp.305-314
    • /
    • 1990
  • In this paper we have implemented and tested TPN which is system to supply sufficent nutrition to nutritionally deficient patient by means of ES (expert system) a kind of A.1 (artificial intelligence) . This system affords to evaluation of nutritional state of patient which is essential to physi- cian. who performs TPN, decision of performing TPN and management of patient-data & calculation of information needing to making TPN fluid. The features were as follolv 1. we input data, take ideal weight of patient and 24hr's creatlnln In urine according to chart in system compare TSF (triceps skin fold), MAC (mid-arm circumference), AMC (arm muscle circumference) to 5th, 15th, 50th percentile and evaluate the nutritional state of patient. 2. Calculation of protein & nonprotein calorie needing to treament of patient can be made exactly by stress factor, activity factor and body temperature. 3. patient's personal recording needing to management of patient date name of chief doc- tor, name of department of admission, chart number, history can by taken very easily. 4. The way of system operating is pull-down Menu one, It can be processing very efficiently. 5. Date processing in system, we can manage memory volume of computer verlr efficiently using of dynamic allocation variables. 6. We can make it very easy to edit & revise the input data, processed data is saved to diskette in 2 files (TDF, THF) , these are semipermanent preservation.

  • PDF

Stability of rectangular tunnel in improved soil surrounded by soft clay

  • Siddharth Pandey;Akanksha Tyagi
    • Geomechanics and Engineering
    • /
    • v.34 no.5
    • /
    • pp.491-505
    • /
    • 2023
  • The practical usage of underground space and demand for vehicular tunnels necessitate the construction of non-circular wide rectangular tunnels. However, constructing large tunnels in soft clayey soil conditions with no ground improvement can lead to excessive ground deformations and collapse. In recent years, in situ ground improvement techniques such as jet grouting and deep cement mixing are often utilized to perform cement-stabilisation around the tunnel boundary to prevent large deformations and failure. This paper discusses the stability characteristics and failure behaviour of a wide rectangular tunnel in cement-treated soft clays. First, the plane strain finite element model is developed and validated with the results of centrifuge model tests available in the past literature. The critical tunnel support pressures computed from the numerical study are found to be in good agreement with those of centrifuge model tests. The influence of varying strength and thickness of improved soil surround, and cover depth are studied on the stability and failure modes of a rectangular tunnel. It is observed that the failure behaviour of the tunnel in improved soil surround depends on the ratio of the strength of improved soil surround to the strength of surrounding soil, i.e., qui/qus, rather than just qui. For low qui/qus ratios,the stability increases with the cover; however, for the high strength improved soil surrounds with qui >> qus, the stability decreases with the cover. The failure chart, modified stability equation, and stability chart are also proposed as preliminary design guidelines for constructing rectangular tunnels in the improved soil surrounded by soft clays.