• KIISE Transactions on Computing Practices
• /
• v.24 no.3
• /
• pp.129-137
• /
• 2018

NVMe(Non-Volatile Memory Express) SSD(Solid State Drive) is a high-performance storage that makes use of flash memory as a storage cell, PCIe as an interface and NVMe as a protocol on the interface. It supports multiple I/O queues which makes it feasible to process parallel-I/Os on multi-core environments and to provide higher bandwidth than SATA SSDs. Hence, NVMe SSD is considered as a next generation-storage for data-center and cloud computing system. However, in the virtualization system, the performance of NVMe SSD is not fully utilized due to the bottleneck of the software I/O stack. Especially, when it uses I/O stack of the hypervisor or the host operating system like Xen and KVM, I/O performance degrades seriously due to doubled-I/O stack between host and virtual machine. In this paper, we propose a new I/O engine, called Direct-AIO (Direct-Asynchronous I/O) engine, that can access NVMe SSD directly for I/O performance improvements on QEMU emulator. We develop our proposed I/O engine and analyze I/O performance differences between the existed I/O engine and Direct-AIO engine.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.2
• /
• pp.27-34
• /
• 2013

NAND Flash Memory has been used in several devices by low cost and high capacity, and the demand for mass NAND Flash Memory has increased due to the multimedia extension of mobile devices. The JFFS2, NILFS2, and YAFFS2 file systems are used mainly in NAND Flash Memory. In this paper, the performance of Sequential read/write of the 3 file systems are analyzed for the 4 I/O schedulers : CFQ(Complete Fair Queuing) I/O scheduler, NOOP(No Operation) I/O scheduler, Anticipatory I/O scheduler, and Deadline I/O scheduler. In JFFS2 file system, Anticipatory I/O scheduler has the best performance by 8% decreasing speed in writing time and 1.5% decreasing speed in reading time compared to the other I/O scheduler. In YAFFS2 file system, it results are similar to performance in reading and writing for the 4 I/O schedulers. In NILFS2 file system, NOOP I/O scheduler has 2% faster in writing and Deadline I/O scheduler has 6% faster in reading than other I/O schedulers.

• The Korean Journal of Malacology
• /
• v.30 no.4
• /
• pp.391-397
• /
• 2014

Previously, we have reported expressed sequence tags (ESTs) analysis on the land snail, Nesiohelix samarangae (Ns). Of these ESTs, we have identified four partial fragments of N. samarangae cytochrome oxydase I (NsCO-I) gene which lead to obtain an 852 bp partial cDNA. Since NsCO-I is one of the best-known molecular phylogenetic markers, we have attempted to conduct comparative in silico analysis by using the NsCO-I gene. The combined results from BLAST analyses, multiple sequence alignment and molecular phylogenetic study of NsCO-I cDNA indicate that N. samarangae has similarity to three land snails such as Elona quimperiana, Euhadra herklotsi and Euhadra idzumonis.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.25-28
• /
• 2017

네트워크 중심전에서 C4I체계의 안정적 운용을 통한 전장에서의 정보우위 달성을 위해 체계의 신뢰성 확보가 필요하여 각 군 C4I체계는 외주 용역업체를 통해 유지보수를 수행 중에 있다. 유지보수는 C4I체계의 수명 주기 중 가장 오랜 기간을 차지하고 있으며 결함 데이터 등의 실증적인 자료를 확보할 수 있는 기간이다. 따라서 유지보수 기간 중 수집한 결함 데이터를 결함분석기법을 통해 분석(치명도, 발생빈도)하고, 주요기능별 활용도를 이용하여 C4I체계 유지보수 관리 우선순위 선정기법을 제안한다. 이 후 제안 기법을 해군 C4I체계의 군적용 사례연구를 통해 유지보수 관리 우선순위를 선정함으로써 유지보수의 제한된 자원(예산, 인력, 시간 등)을 효율적으로 활용하기 위한 판단의 근거로 사용이 가능함을 보인다. 뿐만 아니라 체계화된 결함분석과정을 통해 축적된 자료를 활용하여 유지보수의 연속성 보장과 향후 성능개량사업간 시스템 분석의 참고자료로 활용함에 따라 궁극적으로 C4I체계의 신뢰성을 향상시킬 수 있다.

• Journal of the Korean Society for Library and Information Science
• /
• v.47 no.4
• /
• pp.295-314
• /
• 2013

The purpose of this study is to analyze the curriculum of iSchools in North America. To achieve the aim of the study 17 iSchools and the same number of L-Schools were chosen from the same regional area. Data were collected mainly through each of their official websites and email inquiry. The graduate courses were classified into 8 domains judging by its title, and conducted t-test for a comparative analysis with L-School curriculum using SPSS 19.0. It is found that 'Information Studies', 'Practicum and Study', and 'Library and Information Center Management' domains were dominant in iSchool curriculum. In the comparative analysis, 'Study in Library and Information Science' domain showed lower percentage, whereas 'Information Studies', 'Library and Information Center Management', 'Practicum and Study' domains showed higher percentage than the L-School curriculum.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.961-967
• /
• 2019

This research presents an efficient method based on computational fluid dynamics (CFD) for estimating the resistance performance of a ship with a large settlement amount and a dynamic trim. The settlement of the inviscid flow analysis and the results of dynamic trim were used to set a large attitude for the ship prior to performing a viscous flow analysis; a viscous flow analysis was subsequently performed by Dynamic Fluid Body Interaction (DFBI). This method is termed as method I, in which a simple grating system can be used without employing the overset mesh technique by setting many attitudes before interpretation. Thus, method I is advantageous in reducing calculation time and improving calculation accuracy. The viscous flow analysis was performed using a commercial CFD code STAR-CCM+. Compared with the final convergence result, the first viscous flow analysis result of method I exhibited a variation of less than 1 % of resistance. The result was obtained by changing the gratings each time an attitude is changed at each calculation stage, based on the DFBI method provided to STAR-CCM+ using a simple grating system, which is not a superposed grating. This method is termed as method II. Compared with method II of resistance, method I exhibited a dif erence of 0.03-0.6 % for linear velocity. The results of method I were confirmed to be qualitatively and quantitatively appropriate through comparison with several trillion simulations.

• Journal of Educational Research in Mathematics
• /
• v.20 no.2
• /
• pp.121-143
• /
• 2010

In this article, I reviewed current state of researches about mathematics instruction in Korea and sought ways and methodologies of future research. I analyzed articles which were published after year 2000 and were targeted to mathematical instruction itself. After collecting articles, I classified them according to research subject, method and analysis framework, purpose and focus, research perspective and keyword. Subsequently, I analyzed tendency of each research and theoretical framework of them. Based on upper results, I drew directivity of mathematics instruction research at two aspects. First, I found and suggested elements with which framework of mathematics instruction analysis should equip. Secondly, I explored main tasks of mathematics instruction research.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.3
• /
• pp.165-169
• /
• 2007

Prediction of fatigue duration is attainable from the analysis of the growth rate of the fatigue crack, and the property of the fatigue crack growth is determined by the calculation of the stress intensity factor. And the evaluation of the stress intensity factor, K comes from the stress analysis of the vicinity of crack tip of the continuum. This study describes a simple method to decide the stress intensity factor for the small crack at the sharp edge notches. The proposed method is based on the similarities between elastic stress fields of the notch tip described by two parameters, the stress concentration factor K, the radius of arc of the notch. And it is applicable to the analysis of the semi-elliptical penetration cracks and the edge notches.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.124-132
• /
• 2004

This paper deals with the static and dynamic analysis of the housing and PCB of TCU(Thruster Control Unit) for KSLV-I(Korea Space Launch Vehicle-I). TCU should pass the environment test simulating the flight environment of KSLV-I. The most important tests are the vibration and the shock tests. In this research, we proposed a design standard about the vibration and the shock environment and then verified TCU housing and PCB design met the standard. Based on the analytical results, the TCU housing was redesigned to meet the design standard. The new design is supposed to pass the environment test.

• Speech Sciences
• /
• v.9 no.4
• /
• pp.59-75
• /
• 2002

Aerodynamic analysis study was performed on 14 normal subjects (2 males, 12 females) with nonsense syllables composed of Korean bilabial stops (/p, p', $p^{h}$) and their preceding and/or following vowels, /i, a, u/. That is, [pi, p'i, $p^{h}i$, pa, p'a, $p^{h}a$, pu, p'u, $p^{h}u$, ipi, apa, upu, $ip^{h}i$, $ap^{h}a$, $up^{h}u$, ip'i, ap'a, up'u]. All measures were taken and analysed using Aerophone II voice function analyzer and included peak air pressure, mean air pressure, maximum flow rate, volume, mean SPL and phonatory SPL. A t-test and one-way ANOVA were employed for analysis. A post-hoc analysis was performed with Scheffe and Bonferroni. The results were as follows: First, MSPL. and MAP of /p, p', $p^{h}$/ were significantly different in different positions (initial and medial position). In addition, different vowel environment also produced significantly different aerodynamic characteristics those consonants. Especially the lax consonant /p/ was significantly different /i, a, u/ vowel environments. The tense consonant /p'/ was significantly different only /i/ vowel environment.