• 한국식품과학회지
• /
• 제33권5호
• /
• pp.545-550
• /
• 2001

Effects of high hydrostatic pressure on pH, titratable acidity, color, hardness and microorganisms of Chinese Cabbage Kimchi were investigated. Kimchi was pressurized at $200{\sim}600$ MPa for 5 min. There were no significant differences in color and hardness between control and pressurized Kimchi (p>0.05). Total aerobes and lactic acid bacteria were effectively inactivated by high hydrostatic pressure above 400 MPa. Changes in pH, titratable acidity, color, hardness and microbial counts for 4 weeks storage of Kimchi were investigated Kimchi was pressurized at 400 MPa for 5 min and stored at $4^{\circ}C$. The pH of control decreased to 3.94 but pressurized Kimchi maintained its initial pH value throughout the storage. The color of control showed significantly low values compared with pressureized Kimchi (p<0.05), but hardness was not significantly changed (p>0.05). Total aerobes and lactic acid bacteria in the control were reduced from the initial value of $10^8{\sim}10^9$ CFU/mL to $10^6$CFU/mL after 4 weeks storage. Whereas microbial counts in pressurized Kimchi was maintained about $10^3{\sim}10^4$ CFU/mL during storage.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2616-2628
• /
• 2021

The results of effective irradiation swelling in a wide range of burnup levels are numerically obtained for an inert matrix fuel, which are verified with DART model. The fission gas swelling of fuel particles is calculated with a mechanistic model, which depends on the external hydrostatic pressure. Additionally, irradiation and thermal creep effects are included in the inert matrix. The effects of matrix creep strains, external hydrostatic pressure and temperature on the effective irradiation swelling are investigated. The research results indicate that (1) the above effects are coupled with each other; (2) the matrix creep effects at high temperatures should be involved; and (3) ranged from 0 to 300 MPa, a remarkable dependence of external hydrostatic pressure can be found. Furthermore, an explicit multi-variable mathematic model is established for the effective irradiation swelling, as a function of particle volume fraction, temperature, external hydrostatic pressure and fuel particle fission density, which can well reproduce the finite element results. The mathematic model for the current volume fraction of fuel particles can help establish other effective performance models.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권4호
• /
• pp.522-527
• /
• 2008

On designing of hydrostatic bearing, load, quantity of oil, stiffness and friction load are considered as basic characteristics. For the analysis of these basic characteristics, pressure distribution by oil film is obtained. Speed of piston, clearance, leakage of oil, eccentricity, shape and roughness of bearing affect the results which are the analysis of basic characteristics of load, quantity of oil, stiffness and friction load. The relationship among those factors are required for optimum designing of hydrostatic bearing for machining tool. Reynold's Equation is calculated through finite element method. Load, leakage of quantity and pressure distribution as variation of length, land length ratio, eccentricity and axial velocity of bearing are investigated. Then optimum design variables are obtained.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.647-650
• /
• 2001

In case of bent axis type axial piston hydraulic pump or motor, hydrostatic bearing used to achieve the lubrication effect on the mechanical sliding contact areas between the following pairs ; piston shoe and swash plate, valve plate and cylinder block, piston and cylinder block, etc. In this research, we designed two pairs of spherical ball joint in witch connecting rod piston end. The one is not hydrostatic bearing, the other is designed with spherical hydrostatic bearing in point of view minimum pumping power loss. By varying supply pressure on the piston, we can know that it is possible to reduce the friction torque by using hydrostatic bearing designed one. Finally, by comparing the results of driving torque between the two models, it was verified that the spherical hydrostatic bearing is well designed.

• 소성∙가공
• /
• 제7권1호
• /
• pp.66-71
• /
• 1998

The present study is concerned with the hydrostatic extrusion process of copper-clad aluminium bar to investigate the bonding conditions as well as the basic flow characteristics. Considering the bonding mechanism of bi-metal contact surface as cold pressure welding the normal pressure and the contact surface expansion are selected as process parameters governing the bonding conditions, in this study the critical normal pressure required for the local extrusion-the protrusion of virgin surfaces by the surface expansion at the interface-is obtained using a slip line method and is then used as a criteron for the bonding. A rigid plastic finite element method is used to analyze the steady state extrusion process. The interface profile of bi-metal rod is predicted by tracking the paths of two particles adja-process. The interface profile of bi-metal rod is predicted by tracking the paths of two particles adja-cent to interface surface. The contact surface area ration and the normal pressure along the interface are calculated and compared to the critical normal pressure to check bonding. It is found that the model predictions are generally in good agreement with the experimental observations. The compar-isons of the extrusion pressure and interface profile by the finite element with those by experi-ments are also given.

• 한국식품과학회지
• /
• 제32권3호
• /
• pp.598-603
• /
• 2000

열처리에 의한 식품의 성분변화 손실을 줄이기 위한 비열처리 기술중 하나로 새롭게 주목받고 있는 초고압 처리를 적용하여 저염발효 새우젓의 저장성을 증진시키고자 하였다. 염농도 8%로 $20^{circ}C$에서 6주간 발효한 새우젓의 Vibrio 선택배지 검출균은 $1.6{\times}10^3\;CFU/g$, Staphylococcus 선택배지 검출균은 $9.3{\times}10^3\;CFU/g$이었고 18%의 새우젓에서의 Vibrio 선택배지 검출균은 $1.4{\times}10^4\;CFU/g$, Staphylococcus 선택배지 검출균은 $1.7{\times}10^\;CFU/g$이었다. 새우젓을 압력 $3,500{sim}6,500$기압, 시간 $5{\sim}40$분의 범위로 초고압 살균하였을 때 압력과 처리시간이 증가할수록 살균효과가 증가되었으며 사멸패턴은 1차반응으로 확인되었다. 압력을 6,500기압으로 고정하고 10분 동안 처리하였을 때 유해가능 세균은 본 연구방법의 검출한계인 $10^2\;CFU/g$수준에서는 경출되지 않았다. Vibrio선택배지 검출균의 $D_p$값은 염농도 8%보다 18%에서 더 높았으며 Staphylococcus 선택배지 검출균은 18%보다 8%에서 더 높은 값을 보였다. Vibrio 선택배지 검출균과 Staphylococcus 선택배지 검출균 모두 염농도 8%에서의 $Z_p$값이 염농도 18% 경우보다 높은 값을 보였다. 초고압 공정은 저염발효 새우젓의 살균에 응용될 수 있었으며 최적 고압살균조건은 6,500기압에서 10분간 처리하는 것이었다.

• 대한안전경영과학회지
• /
• 제16권2호
• /
• pp.211-216
• /
• 2014

Using a high-rise building water piping after hydrostatic test of the reliability of the leak to be completed if the pressure is maintained until the leak is not commercially available considered. Due to the nature of high-rise buildings and the construction period will take several years from the lower levels of use of the water supply and fire fighting water pipe construction is in progress, the order of which I do most of the first pipe to the construction and more than three years. So kind of riser pipe is complete, install the valve in the basement by installing an automatic pump to maintain a constant pressure after hydrostatic test and after each floor plumbing piping is complete, the progress of the hydrostatic test without undergoing a separate branch pipe the valve is opened automatically when the number of the pressing pressure of the structure. I kind of do and keep working pressure of pipe until the completion of the construction work to keep the damage to human error when it is intended to prepare. In winter, the frost protection and an alternative to drainage water pipe is damaged or deformed, even if unaware of the finishing work to the building, the use of the damage caused by a leak in a after construction of finish work to be expected. Alternative to reduce this damage if the pressure test without fear of freezing to help maintain long-term commercial pressures may be considered.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.97-101
• /
• 2001

Fine metal (Au, Ag, Cu) wire was extruded with hydrostatic extrusion process in cold condition. A vertical type 900kN hydrostatic extruder has been developed. The extruder was facilitated with high pressure container which are available for hot and cold forming. The container endured 1400MPa internal pressure and extrusion ratio To was achieved in cold forming for Au fine wire which had $600{\mu}m$ diameter. In contrast to the conventional macroscopic-sized-billet fine-wire requires higher extrusion pressure and effect of friction is much more significant.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.593-597
• /
• 2005

It is generally accepted that fracture toughness of fiber-reinforced polymer composites is affected by loading rate in an atmospheric presure condition. For a present study, the loading rate effect on the fracture toughness of fiber-reinforced laminated composites in the hydrostatic pressure condition was investigated. For this purpose, fracture tests have been conducted using carbon/epoxy composites applying three steps of the strain rate at 270 MPa hydrostatic pressure condition. The loading rates applied were 0.05%/sec, 0.25%/sec, and 0.55%/sec. Fracture toughness was determined from the work factor approach as a function of applied loading rate. The result showed that fracture toughness decreased as the loading rate increased. Specifically, the fracture toughness decreased 12% as the loading rate increased from 0.05%/sec to 0.55%/sec.

• 드라이브 ㆍ 컨트롤
• /
• 제9권1호
• /
• pp.10-17
• /
• 2012

Nowadays, the demand of energy saving is increasing more and more while the natural resources have been exhausted. Besides, the emission gas caused by vehicles has been being a serious environment problem. Therefore, many studies have been carried out, especially focusing on braking energy regeneration, in order to save energy as well as reduce emission of mobile vehicles. In this paper, we propose a closed-loop hydrostatic transmission for braking energy regeneration with two configurations to reduce the energy consumption by recovering the braking energy. The effectiveness of the proposed system was verified by simulation. The simulation results indicated that the pressure coupling configuration gave better performance in comparison to flow coupling configuration about 40.8%, 61.7% and 53.8% reduction of fuel consumption in 10 mode, 10 mode modified profile and highway schedules, respectively.