• 한국재료학회지
• /
• 제30권6호
• /
• pp.273-278
• /
• 2020

This research is conducted to analyze the compatibility of used monomers and produce the high functional hydrogel ophthalmic polymer containing silane and nanoparticles. VTMS (vinyltrimethoxysilane), TAVS [Triacetoxy(vinyl)silane] and cobalt oxide nanoparticles are used as additives for the basic combination of SilM (silicone monomer), MMA (methyl methacrylate) and MA (methyl acrylate). Also, the materials are copolymerized with EGDMA (ethylene glycol dimethacrylate) as cross-linking agent, AIBN (thermal polymerization initiator) as the initiator. It is judged that the lenses of all combinations are optically excellent and thus have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic ophthalmic polymer are different in each case. Especially for TAVS, the addition of cobalt oxide nanoparticles increases the oxygen permeability. These materials are considered to create synergy, so they can be used in functional hydrogel ophthalmic lenses.

• 한국염색가공학회지
• /
• 제34권2호
• /
• pp.102-108
• /
• 2022

The physicochemical properties of stainless steel fibers which were modified by oxygen plasma treatment were analyzed through microscopy and XPS analysis. The wettability of the surface of the stainless steel fiber was observed by measuring water contact angle to find out the effect of the plasma treatment time on the surface characteristics of the stainless steel fiber. In addition, in order to understand the effect of oxygen plasma treatment on the deterioration of the stainless steel fiber properties, the physical properties due to plasma treatment was investigated by measuring the weight reduction, tensile strength, elongation, tensile modulus of the stainless steel fibers according to the treatment time. As a result, the stainless steel fiber surface was etched by the oxygen plasma and the surface became more wettable by the introduction of hydrophilic functional groups. However the physical properties of the stainless steel fiber were not significantly deteriorated even if the surface of the stainless steel fiber made hydrophilic.

• 폴리머
• /
• 제26권2호
• /
• pp.279-286
• /
• 2002

기능성고분자표면으로 개질하기 위해서 polyethylene(PE)표면에 아크릴산을 알곤 플라즈마를 이용하여 고정화와 그라프팅을 행하고 고정화와 그라프딩에 의한 개질효과를 ATR적외선스펙트럼의 분석, 접촉각과 접착강도 측정에 의하여 평가하였다. 아크릴산의 특성흡수띠와 접촉각의 현저한 감소사실로부터 친수성개질을 평가하였다. 그라프팅된 PE의 접촉각은 플라즈마처리시간에 따라서 무처리 PE에 비하여 47~$53^{\circ}$ 감소하였고 고정화된 PE는 이보다 작은 23~$26^{\circ}$ 감소하여 그라프팅이 고정화보다 더 효과적인 친수화 수단이 됨을 관찰할 수 있었다. 표면친수화의 정도는 플라즈마 처리시간과 방전출력에 강하게 의존하였다. 그라프팅의 경우 처리시간이 증가할수록 더욱 친수화되지만 고정화의 경우는 처리시간의 증가와 방전출력의 증가는 오히려 친수성을 감소시켰다. 개질된 PE표면의 peel test에 의한 접착강도측정 전파 역시 접촉각과 같은 경향을 나타내었다. 이러한 현상은 고정화과정 중에 아크릴산이 ablation되어 표면의 카복시친수성기가 감소하는 현상 때문으로 해석되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.257-257
• /
• 2013

In order to selectively remove oil and organic compound from water, silica nanoparticles with hydrophobic coating was used. Since silica nanoparticles are generally hydrophilic, removal efficiency of oil and organic compound, such as toluene, in water can be decreased due to competitive adsorption with water. In order to increase the removal efficiency of oil and toluene, hydrophobic polydimethylsiloxane (PDMS) was coated on silica nanoparticles in the form of thin film. Hydrophobic property of the PDMS-coated silica nanoparticles and hydrophilic silica nanoparticles were easily confirmed by putting it in the water, hydrophilic particle sinks but hydrophobic particle floats. PDMS coated silica nanoparticles were dispersed on a slide glass with epoxy glue on and the water contact angle on the surface was determined to be over $150^{\circ}$, which is called superhydrophobic. FT-IR spectroscopy was used to check the functional group on silica nanoparticle surface before and after PDMS coating. Then, PDMS coated silica nanoparticles were used to selectively remove oil and toluene from water, respectively. It was demonstrated that PDMS coated nanoaprticles selectively aggregates with oil and toluene in the water and floats in the form of gel and this gel remained floating over 7 days. Furthermore, column filled with hydrophobic PDMS coated silica nanoparticles and hydrophilic porous silica was prepared and tested for simultaneous removal of water-soluble and organic pollutant from water. PDMS coated silica nanoparticles have strong resistibility for water and has affinity for oil and organic compound removal. Therefore PDMS-coated silica nanoparticles can be applied in separating oil or organic solvents from water.

• 대한환경공학회지
• /
• 제27권12호
• /
• pp.1321-1326
• /
• 2005

낙동강 원수의 경우 소수성 물질이 43%, 친수성 물질이 39%, 반친수성 물질이 18%를 차지하고 있는 것으로 나타났으며, 소수성 물질을 세분화하여 조사한 결과 fulvic acid는 62%, humic acid는 38%로 나타났으며, 또한, 카르복실기는 64%, 페놀기는 36%를 차지하고 있는 것으로 나타났다. 친수성 물질을 세분화하여 조사한 결과 HPI-N이 44%, HPI-C가 56%를 차지하고 있었다. 친수성 유기물질 중 HPI-C에 비하여 HPI-N이 막 오염을 더욱 많이 유발하였으며, 소수성 유기물질에서는 HA가 FA에 비하여 막 오염을 더 많이 유발하였으며, 작용기에 따른 막 오염 현상을 살펴보면 카르복실기의 경우 페놀기에 비하여 투과 flux 감소가 크게 나타나고 있다. 공극의 크기가 커질수록 공극 속으로 전달되는 고분자 유기물이 많이 발생하며 이러한 고분자 유기물이 공극을 막아버리는 현상에 의하여 투과 flux 감소가 발생하는 것으로 나타났다. 또한 공극의 크기가 상대적으로 큰 막의 경우 투과되는 양이 공극이 작은 막 보다 상대적으로 많기 때문에 운전초기에 많은 양의 유기물이 막으로 전달되어 막의 표면과 공극에 흡착되어 막의 공극의 크기가 커짐에 따라 투과 flux 감소가 크게 나타났다.

• 대한화학회지
• /
• 제61권3호
• /
• pp.97-103
• /
• 2017

In this study, the functional hydrogel ophthalmic lens containing tungsten oxide nanoparticles, 2,4-dihydroxy benzophenone and 2-hydroxy-4-(methacryloyloxy) benzophenone were manufactured. HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), AA(acrylic acid), the cross-linker EGDMA (ethylene glycol dimethacrylate), the initiator AIBN (azobisisobutyronitrile) and the functional additives including tungsten oxide nanoparticles, 2,4-dihydroxy benzophenone, and 2-hydroxy-4-(methacryloyloxy) benzophenone were used respectively. The measurements of water content and refractive index of the sample was decreased and increased, respectively. And also, the UV transmittance of produced lens containing 2,4-dihydroxy benzophenone, 2-hydroxy-4-(methacryloyloxy) benzophenone and tungsten oxide nanoparticles was measured. Based on the results of this study, it is judged that the performance improvement increased over time when 2-hydroxy-4-(methacryloyloxy) benzophenone was used as an additive, while the use of tungsten oxide nanoparticles influenced on blue-ray-blocking effect of the hydrophilic lens.

• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.839-844
• /
• 2008

$TiO_2$ is an environment-friendly semiconducting material, and it has photocatalytic and hydrophilic effect. There are a lot of reports on the photocatalytic characteristics of $TiO_2$, such as organic pollutants resolving, anti-bacterial, and self-purification material. In this paper, $TiO_2$ micron-sized powders were deposited on the glass by room temperature powder spray in vacuum process, so called aerosol deposition (AD), and nano-grained $TiO_2$ photocatalytic thin films were fabricated. The thickness of the films were controlled by changing the number of deposition cycle. Morphologies and characteristics of the AD-$TiO_2$ thin films were examined by SEM, TEM, XRD, and UV-Visible Spectrophotometer. As the thickness of $TiO_2$ films increased, surface roughness increased. By this increment, the reaction area between film and pollutant was enlarged, resulting in better photocatalytic property.

• 한국재료학회지
• /
• 제16권9호
• /
• pp.543-549
• /
• 2006

Polyimides (PI) are treated with $He/O_2$ and $He/O_2/NF_3$ atmospheric pressure rf dielectric barrier discharge in order to investigate the roles of $NF_3$ that is one of the PI etching gases. Surface changes are analyzed by x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle measurement. The surface roughness of PI and the ratio of C=O, which is hydrophilic functional group, is more increased by $He/O_2/NF_3$ discharge than by $He/O_2$ discharge. The C=O species on the PI surface is increased up to 30 percent with rf power. The surface roughness of PI is increased from 0.4 to 11 nm with rf power. The water drop contact angles on PI, however, are reduced from $65^{\circ}\;to\;9^{\circ}$ by plasma treatment independently of $NF_3$.

• 통합자연과학논문집
• /
• 제11권1호
• /
• pp.1-8
• /
• 2018

HEMA, AA, MMA, and EGDMA as crosslinking agent and AIBN as an initiator, and 2,4-dihydroxybenzophenone, 2-ethylhexyl-trans-4-methoxy-cinnamate, 2-hydroxy-4-(methacryloyloxy)benzophenone as additives at 0.1-1.0% ratios were used to manufacture hydrophilic ophthalmic lenses through thermal polymerization before their physical properties were measured. The results showed that the samples containing of 2,4-dihydroxybenzophenone and 2-ethylhexyl-trans-4-methoxy-cinnamate resulted in a decrease of the UV blocking performance after high-pressure sterilization whereas the sample containing 2-hydroxy-4-(methacryloyloxy)benzophenone showed no change in the UV blocking performance. It is judged that this is induced by presence or absence of an acyl functional group in benzophenone.

• 한국재료학회지
• /
• 제12권9호
• /
• pp.740-746
• /
• 2002

In this study, the polycarbonate surface was treated by $O_2$/ Ar gases plasma for the enhancement of adhesion with Cu electrode. From the point of view of hydrophilicity and the functionality, the micro-roughness, new functional groups and oxygen content of the polycarbonate surface were increased by the $O_2$/ Ar gases plasma treatment. The Cu films deposited on the as-received polycarbonate were easily detached while, after the$ O_2$/ Ar gases plasma treatment the adhesive Cu films on polycarbonate could be obtained. These results can be explained that the polycarbonate had a hydrophilic surface with uniform micro-roughness and new functional groups by $O_2$/ Ar gases plasma treatment. Therefore,$O_2$/ Ar gases plasma treatment is a promising method for improvement of adhesion between polycarbonate and Cu electrode.