• Bulletin of the Korean Chemical Society
• /
• v.30 no.10
• /
• pp.2443-2445
• /
• 2009

• Resources Recycling
• /
• v.17 no.6
• /
• pp.17-23
• /
• 2008

In order to simulate the leaching solution of copper sulfide ore in $FeCl_3$ solutions, synthetic solutions with composition of $FeCl_3$-$FeCl_2$-$CuCl_2$-CuCl-NaCl-HCl-$H_2O$ were prepared. The concentration of iron and copper chloride was varied from 0.1 to 1 m in synthetic solutions. The effect of composition on the mixed solution pH and potential at $25^{\circ}C$ was measured. When HCl concentration was constant, the increase of CuCl concentration increased solution pH. The increase of other solutes excluding HCl and CuCl decreased solution pH owing to the increase of the activity coefficient of hydrogen ion. A high CuCl concentration favored the redox equilibrium in the direction of Cu(I), while $FeCl_3$ had the opposite effect.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.23-28
• /
• 1999

Au fine particles dispersed $TiO_{2}$ film was prepared on silica glass substrate by sol-gel dipping and firing process. The $TiO_{2}$ films were fabricated from the system of titanium tetraisopropoxide-EtOH-HCl-$H_{2}O$-hydrogen tetrachloroaurat (III) tetrahydrate. The conditions for the formation of clear solution and dissolving high concentration of Au compound were examined. Photoreduction process was adopted to control the size of gold metal particles. Phase evolution of matrix $TiO_{2}$ and variation of Au particle with UV irradiation were investigated by XRD, SEM, TEM and UV-visible spectrophotometer. The effect of CPCl (Cetylpyridinium chloride monohydrate) as a dispersion agent was evaluated.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.10
• /
• pp.1661-1664
• /
• 2007

Direct reaction of elemental silicon with a gaseous mixture of isopropyl chloride (1) and hydrogen chloride in the presence of copper catalyst using a stirred bed reactor equipped with a spiral band agitator gave isopropyldichlorosilane having a Si-H bond (2a) as a major product and isopropyltrichlorosilane (2b) along with chlorosilanes, trichlorosilane and tetrachlorosilane. A process for production of 2a was maximized using the 1:0.5 mole ratio of 1 to HCl and smaller size of elemental silicon at a reaction temperature of 220 °C. When a reaction was carried out by feeding a gaseous mixture of 1 [12.9 g/h (0.164 mol/h)] and HCl [2.98 g/h (0.082 mol/h)] to a contact mixture of elemental silicon (360 g) and copper (40 g) under the optimum condition for 45 h, 2a among volatile products kept up about 82 mol % until 35 h and then slowly decreased down 68 mol % in 45 h reaction. Finally 2a was obtained in 38% isolated yield (based on 1 used) with an 85% consumption of elemental silicon in a 45 h reaction. In addition to 2a, 2b was obtained as minor product along with chlorosilanes, trichlorosilane, and tetrachlorosilane. The decomposition of 1 was suppressed and the production of 2a improved by adding HCl to 1.

• Journal of the Korean Society of Safety
• /
• v.35 no.6
• /
• pp.85-92
• /
• 2020

Wet Scrubber reacts the incoming pollutant gas with cleaning water (water + absorbent) to absorb pollutants and release the clean air to the atmosphere. Wet scrubbers and packed tower scrubbers using this principle are widely used in businesses that emit acid gases. In particular, in the etching process using hydrochloric acid (HCl), alkaline washing water (NaOH) having a pH of about 8 to 11 is used to absorb a large amount of acid gas. However, These salts are attached to the injection nozzle (nozzle), filling material (packing), and the demister (Demister), causing air pollution, human damage, and inoperability due to clogging and acid gas discharge. Therefore, In this study, an improvement plan was proposed to manage the washing water with pH 3~4 acidic washing water. The test method takes samples from the Wet Scrubber flue measurement laboratory twice a month for 1 year. Hydrogen chloride (HCl) concentration (ppm) was measured, and nozzle clogging and scale conditions were measured, compared, and analyzed through a differential pressure gauge and a pressure gauge. As a result of the check, it was visually confirmed that the scale was reduced to 50% or less in the spray nozzle, filler, and demister. In addition, the emission limit of hydrogen chloride in accordance with the Enforcement Regulation of the Air Quality Conservation Act [Annex 8] met 3 ppm or less. Therefore, even if the washing water is operated in an acidic pH range of 3 to 4, it is expected to reduce air pollution and human damage due to clogging of internal parts, and it is expected to reduce maintenance costs such as regular cleaning or replacement of parts.

• Korean Journal of Metals and Materials
• /
• v.46 no.1
• /
• pp.20-25
• /
• 2008

The ionic equilibira in mixed solutions of cuprous and cupric chloride were analyzed by considering chemical equilibria, mass and charge balance equations. The activity coefficients of solutes were calculated by using Bromley equation. Required thermodynamic constants and interaction parameters were evaluated from the data reported in the literature. The effect of NaCl and CuCl concentrations on the pH and potential of the mixed solutions was explained in terms of the variation in the concentration of solutes and in the activity of hydrogen ion. The calculated pH values of the mixed solutions agreed well with the measured values. However, the calculated values for the potential of the mixed solutions were lower than the measured values, indicating the necessity of considering the complex formation between cuprous and chloride ion, such as $Cu^2Cl{_4}^{2-}$ and $Cu_3Cl{_6}^{3-}$.

• Resources Recycling
• /
• v.16 no.5
• /
• pp.8-12
• /
• 2007

Anhydrous magnesium chloride, dehydration product from magnesium chloride hydrate is a general raw material to prepare electrolytic magnesium. However, the dehydration is not trivial and can be accompanied by hydrolysis leading to the production of undesirable hydroxy chloride compounds of magnesium. Therefore, dehydration process is actually the most complicated and hardest in the electrolysis methods for the production of magnesium. In this work, the influence of dehydrating temperature has been studied at the temperature range from $200^{\circ}C$ to $600^{\circ}C$ in air and HCl gas atmosphere individually to compare the results. With increasing of dehydration temperature MgOHCl and MgO were obtained in air. On the other hand, when the temperature was increased above $300^{\circ}C$ anhydrous magnesium chlorides were prepared in HCl gas atmosphere. Anhydrous magnesium chloride was formed at near $300^{\circ}C$ and completely crystallized at about $500^{\circ}C$. All of the HCl used as atmosphere gas in the dehydration was recovered as hydrochloric acid solution at a water vessel up to 41% by weight at $20^{\circ}C$.

• Animal Bioscience
• /
• v.34 no.10
• /
• pp.1632-1642
• /
• 2021

Objective: The hypothesis was that apparent ileal digestibility (AID), basal endogenous losses, and standardized ileal digestibility (SID) of amino acids (AA) are not affected by adding acid to collection containers or bags used to collect ileal digesta from pigs. Methods: Twenty-four growing barrows (initial body weight: 77.8±4.5 kg) that were fitted with a T-cannula in the distal ileum were fed diets for three 7-d periods. An N-free diet and 3 diets containing corn, soybean meal, or wheat middlings as the sole source of AA were used. Within each period, each of the 4 diets were fed to 6 pigs. Among the 6 pigs, digesta from 3 pigs were collected in bags containing no HCl, whereas 40 mL of 3 N HCl was included in the bags used to collect digesta from the remaining 3 pigs. Every other bag collected from each pig was emptied into a container without adding HCl, whereas the remaining bags were added to a container along with 40 mL of 3 N HCl for each bag. All digesta were stored at -20℃ immediately after collection. Data were analyzed using a model that included feed ingredient, HCl in bags, HCl in containers, and all 2-way and 3-way interactions as fixed effects. No 3-way interactions were significant, and data were, therefore, reanalyzed independently for each diet as a 2×2 factorial. Results: There were no interactions between adding HCl to collection bags and to containers, and no effects of adding HCl to collection bags or containers for AID, basal endogenous losses, or SID of most AA were observed. Conclusion: It is not necessary to add acid to digesta collection bags or collection containers if ileal digesta are stored at -20℃ immediately after collection.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2415-2418
• /
• 2008

Polydiacetylenes (PDAs) are very attractive chemical substances which have distinctive features of color change and fluorescence emission by thermal or chemical stress. Especially, when PDAs contact with solutions of a particular pH, such as a strong alkaline sodium hydroxide (NaOH) solution or a strong acidic hydrogen chloride (HCl) solution, PDAs change their color from non-fluorescent blue to fluorescent red. In this study, we propose a novel method to detect alkaline pH using PDAs and NaOH solutions by hydrodynamic focusing on a microfluidic chip. Preliminary results indicate that the fluorescent intensity of PDAs increases in respond to the NaOH solution concentrations. Also, the fluorescence is quenched back when the PDAs are in contact with a HCl solution. These results are useful in a microfluidic PDA sensor chip design for pH detection.

• Korean Journal of Environmental Agriculture
• /
• v.1 no.1
• /
• pp.53-58
• /
• 1982

A study was carried out to examine the effects of chlorine and hydrogen chloride gas with various concentrations (0.1, 0.25, 0.5 and $1.0\;g/m^3/hr)$ on rice and soybean plants. Symptoms, ratios of destroyed leaf, grain yield and chlorophyll contents in leaves were investigated. The results are as follows. 1) Hydrogen chloride gas damaged the margine parts of rice and soybean leaves, but chlorine appeared grayish subtle spots in whole parts of rice and soybean leaves. 2) Rice leaves showed higher damage ratio in hydrogen chloride fumigation than in soybean leaves, but less damage in chlorine. 3) Chlorophyll contents in rice leaves were higher in chlorine gas fumigated than hydrogen chloride fumigated. 4) The ratio of destroyed leaf was negatively correlated with chlorophyll contents.