• 대한치과교정학회지
• /
• 제22권1호
• /
• pp.43-65
• /
• 1992

Bonding orthodontic adhesive resins to glazed porcelain surface is not attainable. The aim of this investigation was to examine, in vitro, the effect of three methods of porcelain surface pretreatment on the shear bond strength of orthodontic adhesives, and to compare the shear strength of orthodontic bracket bonding to porcelain surface by the best results that to human enamel. Porcelain disks ($Ceramco^{(TM)}$ and $Vita^{(TM)}$) baked in the laboratory were roughened by sandpapers, #320, #600, #800, #1000 and #1200, and were pretreated with silane and dried at the various temperatures, room temperature, $50^{\circ}C$, $70^{\circ}C$ and $90^{\circ}C$, and were etched by 3% hydrofluoric acid solution for 1, 3, 5, 7, and 9 minutes, orthodontic adhesives (System $1+^{(TM)}$ and $Unite^{(TM)}$) were applied on them, and shear bond strengths were measured by Instron. The best results of pretreatment of each method were determined by the shear bond strengths. Again, porcelain disks were pretreated by the determined best results and human enamel were etched by 37% hydrofluoric acid solution, orthodontic brackets were bonded on them by the orthodontic adhesives, and the shear bond strengths were measured and compared between them. 1. Roughening porcelain surfaces with coarse sandpaper (#300) showed higher shear bond strength than that with finer sandpapers, but it $(22.44Kgf/cm^2)$ was distinguishably low compared to that from etched human enamel $(144.11Kgf/cm^2)$. 2. There were disparities in shear bond strengths upon the orthodontic resins, which was presumably related to the contents of fillers in orthodontic adhesive resins. Also there were disparities in shear bond strength upon the porcelains which had different composition. 3. Silane enhanced the shear bond strength of orthodontic resins to porcelain surfaces ($25.20Kgf/cm^2$ at $50^{\circ}C$), which was markedly low compared to that from etched human enamel. 4. Etched porcelain surface with 3% hydrofluoric acid solution for 1 to 9 minutes showed no difference in shear bonding strength of orthodontic adhesive resins. Shear bond strength from etched porcelain $(97.43-120.72Kgf/cm^2)$ were as high as clinically available, but low compared to that from etched human enamel. 5. Roughening with #300 sandpaper and etching by 3% hydrofluoric acid followed silane application on porcelain surface showed lower shear bond strength than etched human enamel, but were as high as clinically useful. 6. The results suggest that etching porcelain surface by 3% hydrofluoric acid solution might provide comparatively high shear bond strength as much as clinically favorable.

• 자원리싸이클링
• /
• 제20권1호
• /
• pp.61-68
• /
• 2011

산세척을 통해 금속급 실리콘을 정련하기 위해 황산, 질산, 염산과 불산의 혼산 용액을 사용하여 $50^{\circ}C$에서 불순물의 제거 거동을 조사하였다. 금속급 실리콘에 함유된 불순물중 붕소는 산세척으로 제거되지 않았고, 농축효과로 인해 처리 후 농도가 종가하였다. 본 실험범위에서 인은 약 60% 정도 제거되었다. 황산과 질산용액으로 처리시 주요 불순 금속의 제거율은 50% 미만으로 정련 효과가 크지 않았다. 염산과 불산의 혼산으로 산세척하면 주요 불순 금속이 90% 정도 제거되었다. 각 산세척조건에서 얻은 실리콘의 순도와 주요 불순 금속들의 제거율에 대한 자료를 제시하였다.

• The Journal of Advanced Prosthodontics
• /
• 제9권2호
• /
• pp.77-84
• /
• 2017

PURPOSE. The aim of this study was to compare the surface roughness of zirconia when using Zircos E etching system (ZSAT), applying a nitric acid-hydrofluoric acid compound as a pretreatment agent, and also to compare the shear bonding strength according to different resin cements. MATERIALS AND METHODS. ZSAT, air abrasion, and tribochemical silicacoating were applied on prepared 120 zirconia specimens (10 mm in diameter, 7 mm in height) using CAD/CAM. Each 12 specimens with 4 different resin cements (Panavia F 2.0, Rely X Unicem, Superbond C&B, and Hot bond) were applied to test interfacial bond strength. The statistical analysis was performed using SAS 9.1 (SAS Institute Inc., Cary, NC, USA). The results are as follows: after application of the ZSAT on the zirconia specimens, surface roughness value after 2-hour etching was higher than those after 1- and 3-hour etching on SEM images. RESULTS. For Superbond C&B and Rely X Unicem, the specimens treated with ZSAT showed higher shear bond strength values than those treated with air abrasion and tribochemical silicacoating system. Regarding the failure mode of interface over cement and zirconia surface, Rely X Unicem and Hot bond showed cohesive failures and Panavia F 2.0 and Superbond C&B showed mixed failures. CONCLUSION. Zircos E etching system in zirconia restoration could increase its shear bond strength. However, its long term success rate and clinical application should be further evaluated.

• 한국위험물학회지
• /
• 제3권1호
• /
• pp.59-64
• /
• 2015

Semiconductor industry has large number of chemical inventory and is easily exposed to chemical release incidents. Toxic release is one of the most interested area in evaluating consequence to the vicinity of industry facilities handling hazardous materials. Hydrofluoric acid is one of the typical chemical used in semiconductor facility and is selected and toxic release is evaluated to assess the risk impacted to its off-site. Accident scenarios were listed using process safety information. The scenarios having effect to the off-site were selected and assessed further according to guideline provided by Korea government. Worst case and alternative scenarios including other interested scenarios were evaluated using ALOHA. Each evaluated scenario was assessed further considering countermeasures. The results showed that the facility handling hydroflooric acid is safe enough and needed no further protections at the moment.

• 구강회복응용과학지
• /
• 제37권1호
• /
• pp.23-30
• /
• 2021

목적: 본연구의 목적은 다양한 산용액을 이용하여 지르코니아의 표면을 처리하여 표면의 양상과 골유착에 미치는 영향을 알아보는 것이다. 연구 재료 및 방법: 준비된 지르코니아 디스크에 다양한 산용액 및 광촉매 산부식을 이용하여 표면을 처리하였다. 각 시편을 SEM으로 관찰하고, 골유착을 관찰하기 위해 MC3T3E-1 세포를 이용하여 형광염색과 역전사 중합효소 연쇄반응을 통해 평가하였다. 결과: 처리한 방법에 따라 다양한 거칠기를 보였다. 불산처리군은 표면의 거칠기가 증가하였으나 약한 네트워크 구조를 가지고 있었다. 골유착능에서는 광촉매 산부식을 시행한 군에서 더 좋은 결과를 보였다(P < 0.05). 결론: 지르코니아를 광촉매 산부식방법으로 처리할 경우 다른 산처리방법에 비해 골유착능을 높이는데 효과적일 것으로 사료된다.

• Bulletin of the Korean Chemical Society
• /
• 제35권4호
• /
• pp.1029-1035
• /
• 2014

The protolytic dissociation process of hydrochloric acid (HCl) and hydrofluoric acid (HF) is studied using the B3LYP and MP2 methods with the 6-311+G(d,p) basis set in the gas phase and in aqueous solution. To study the phenomena in detail, discrete and discrete/continuum models were applied by placing water molecules in various positions around the acid. The dissociation process was studied using the thermodynamic cycle involving the structures optimized both in the gas phase and in aqueous solution and was analyzed with two key energy factors, relaxation free energy (${\Delta}G_{Rex(g)}$) and solvation free energy (${\Delta}G_s$). Based on the results, we could understand the dissociation mechanism and wish to propose the best way to study acid dissociation process using the CPCM methodology in aqueous solution.

• 대한치과보철학회지
• /
• 제33권4호
• /
• pp.693-704
• /
• 1995

This study was performed to evaluate effective surface conditioning method of In-Ceram core to improve bonding with resin cement. The surface of each sample was avraded with glass bead for 20 seconds and then subjected to one of the following conditions : no modification, sandblasting with $50{\mu}m$ slumimum oxide powders for 20 seconds, etching with 20% hydrofluoric acid for 5, 10, and 15 minutes(half of the etched samples were coated with silane), and sandblasting with $250{\mu}m$ aluminum oxide powders and silica coating whith Silicoater MD system(Kulzer, Germany). The surface morphology changes were examined with scanning electronic microscope(SEM. and the shear bond strength of In-Ceram core samples to resin cement(Panavis 21, Kurayay, Japan) were measured. It was concluded that : 1. By SEM observation, 20% HF acid etching did not create clear microretentive structure and surface roughness diminished with increace in etching time. Sandblasting was more effective than 20% hydrofluoric acid etching in producing microretentive structure. 2. The bond strengths of all In-Ceram core samples surface conditioned were increased that that of control group. 3. Silica coating showed higher bond strength than etching with 20% hydrofluoric acid. 4. The use of silane coating was more effective in improving bond strength than lengthening etching time.

• Archives of Plastic Surgery
• /
• 제36권1호
• /
• pp.113-117
• /
• 2009

Purpose: Although Hydrofluoric acid(HF) is not a strong acid when compared to other hydrogen halides, it is a feared corrosive and is particularly dangerous at higher concentrations. HF burns are characterized by symptoms, often delayed and localized with diluted HF solutions, to include erythema, edema and severe pain. Pain, a well known symptom following exposure to calcium binding. And, EMLA$^{(R)}$ cream is a topical formulation based upon the eutectic mixture of lidocaine and prilocaine and is used in clinical settings to provide pain relief undergoing superficial surgical procedures. The aim of this study is to evaluate effects of EMLA$^{(R)}$ cream, pain - control dressing on the treatment for HF injury wound. Methods: From June 2007 to June 2008, this study was carried out with 10 patients who had HF partial thickness burns. We were applied topically EMLA$^{(R)}$ cream to injured wound with vaseline gauze and 10% calcium gluconate wet gauze dressings. As a principle, in the emergency treatment, partial or complete removal of the bullae along with copious washing with normal saline was done, depending on the degree of HF invasion of the distal digital extremities. The effect of dressing was investigated by visual analogue pain scale. Results: We therefore reviewed 10 cases of HF - induced pain and pain relief treatment principle. The 10 cases who came to the hospital nearly immediately after the injury healed completely without sequelae and EMLA$^{(R)}$ related complications. Conclusion: Proper initial treatment of HF burns are important, if not promptly recognized and properly treated, for produce serious injury. Topical EMLA$^{(R)}$ cream remain a powerful, new advancement for minimizing HF - related pain during dressing procedures. When used appropriately, topical EMLA$^{(R)}$ cream can provide a safe and effective alternative to other forms of HF - pain control treatment.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권6호
• /
• pp.6-12
• /
• 2014

We reviewed literature focusing on the amounts of domestic production, distribution, and consumption of strong acids and their spill cases. In particular, we investigated the chemistry and toxicity of four strong acids classified as "accident preparedness substances," including hydrochloric, nitric, sulfuric, and hydrofluoric acid. We recommend sulfuric and hydrofluoric acid as the chemicals of priority control based on the amounts used and toxicity. An advanced prevention/response system needs to be established along with an improved human and social infrastructure to prevent and efficiently respond to chemical accidents. Understanding the behavior and transport of spilled strong acids in the soil and groundwater environments requires a multi-disciplinary approach since they go through a variety of chemical and biogeochemical reactions with complex geomedia. However, no such research has been done in this area in Korea to the best of our knowledge. We expect the results of this study to contribute as basic data to future research.

• 센서학회지
• /
• 제17권2호
• /
• pp.95-99
• /
• 2008

Various etching methods of optical fiber and formation of metal nano particles on the optical fiber have been proposed for fabrication of fiber optic localized surface plasmon resonance (FO LSPR) biosensors. Different types of etched optical fiber are possible by removing the cladding of optical fiber using HF (hydrofluoric acid) solution and BHF (buffered hydrofluoric acid) solution, which results in improved surface roughness when BHF solution is used. Localized surface plasmon can be formed and measured by formation of silver and gold nano particles on the etched optical fiber. The characteristics of the etched optical fiber and metal nano particles on the etched surface of the optical fiber play a key role in dictating the sensitivity of the LSPR sensors, so that the proposed results can be expected to be applied for related research on fiber optic based biosensors.