• 대한조선학회지
• /
• 제24권4호
• /
• pp.19-36
• /
• 1987

In this research the coupling problem between the elastic structure and the fluid, specially the hydroelastic harmonic vibration problem, is studied. In order to couple the domains, i.e., the structural domain and the fluid domain, the boundary integral method(direct boundary integral formulation) is used in the fluid domain in combination with the finite element method for the structure. The boundary integral method has been widely developed to apply it to the hydroelastic vibration problem. The hybrid boundary integral method using eigenfunctions on the radiation boundaries and the boundary integral method using the series form image-functions to replace the even bottom and free surface boundaries in case of high frequencies have been developed and tested. According to the boundary conditions and the frequency ranges the different boundary integral methods with the different idealizations of the fluid boundaries have been studied. Using the same interpolation functions for the pressure distribution and the displacement the two domains have been coupled and using Hamilton principle the solution of the hydroelastic have been obtained through the direct minimizing process. It has become evident that the finite-boundary element method combining with the eigenfunction or the image-function method give good results in comparison with the experimental ones and the other numerical results by the finite element method.

• 대한조선학회논문집
• /
• 제37권4호
• /
• pp.66-74
• /
• 2000

본 논문은 초대형 부유식 해양구조물의 유탄성 응답에 대한 계산을 선형 이론에 근거하여 해석하였다. 이론 방법은 압력분포법과 모우드 전개법을 사용하여 계산하였고, 유체 압력을 계산하기 위해 자유표면 위에 특이점을 분포하였다. 초대형 해양 구조물은 판 구조물로 근사시키고, 구조물의 수직 변위는 양단이 자유인 보의 고유함수에 의한 모우드 전개법을 사용하여 계산하였다. 본 논문의 계산 항목은 수직 운동응답, 압력분포, 부가질량, 감쇠계수 및 굽힘 모우멘트이고, 계산 결과에 의하면 기존의 실험치와 좋은 일치를 보여준다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.908-913
• /
• 2002

An analytical study is presented on the hydroelastic vibration of two rectangular identical plates coupled with a bounded fluid by using the finite Fourier series expansion method. It is observed that the two contrastive modes, the so called the out-of-phase and in-phase modes appear. The proposed analytical method is verified by observing a good agreement to three dimensional finite element analysis results. All natural frequency of the in-phase modes can be predicted well by the combination of the dry beam modes. The theoretical prediction for the out-of-phase mode can be improved by using the polynomial functions satisfying the plate boundary conditions and fluid volume conservation instead of using dry beam modes.

• 한국해양공학회지
• /
• 제19권4호
• /
• pp.1-8
• /
• 2005

A nonlinear time-domain strip theory for vertical wave loads and ship responses is to be investigated. The hydrodynamic memory effect is approximated by a higher order differential equation without convolution. The ship is modeled as a non-uniform Timoshenko beam. Numerical calculations are presented for the S175 Containership translating with the forward speed in regular waves. The approach described in this paper can be used in evaluating ship motions and wave loads in extreme wave conditions and validating nonlinear phenomena in ship design.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.345.1-345
• /
• 2002

This paper dealt with an experimental study on the hydroelastic vibration of clamped perforated rectangular plates submerged in water. The penetration of holes in the plates had a triangular pattern with P/D (pitch to diameter) 1.750, 2.125, 2.500, 3.000 and 3.750. The natural frequencies of the perforated plates in air were obtained by the analytical method based on the relation between the reference kinetic and maximum potential energies and compared with the experimental results. (omitted)

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2011년도 정기 학술대회
• /
• pp.209-212
• /
• 2011

본 논문에서는 평판(plate) 형태를 갖는 부유식 해상구조물의 유탄성해석에 관한 연구를 수행하였다. 유체력 산정을 위해 포텐셜을 입사, 방사, 산란으로 구분하여 계산하였던 기존의 방법 대신 전체 포텐셜을 직접 계산하는 방법을 사용하여 최근의 경향을 반영하였다. 선형 유탄성해석의 특성을 고려하여 해석시간을 감소시키기 위해 일반적으로 사용되고 있는 주파수 영역에서의 해석 기법을 적용하였다. 구조체의 모델링에 소요되는 요소수를 줄이고, 휨 변형 시 전단변형률에 의한 잠김현상을 해소하기 위해 MITC 기법을 적용한 평판 유한요소를 사용하였으며, 3차원 Green 함수법을 적용해 유체력을 산정하였다.

• 전산구조공학
• /
• 제22권5호
• /
• pp.78-85
• /
• 2009

• 대한조선학회논문집
• /
• 제38권4호
• /
• pp.39-47
• /
• 2001

본 논문에서는 매트형 거대 부유식 구조물의 동적 응답을 모드중첩법을 이용하여 시간영역에서 해석하였다. 동유체력의 시간기억함수는 고차경계요소법으로 계산한 동유체감쇠력을 푸리에변환하여 구하였으며, 구조물의 동적 응답은 해석적으로 유도한 고유 모드를 시간적분하여 산정하였다. 해석법을 검증하기 위하여 집중하중이 순간적으로 제거되는 경우, 집중하중이 충격적으로 가해지는 경우, 그리고 집중하중이 등속으로 일정거리를 움직인 경우 등 3가지에 대하여 계산을 수행하였다. 이렇게 얻은 수치결과는 3가지 경우 모두 모형에 대한 실험치와 잘 일치하였다.

• 대한조선학회논문집
• /
• 제40권5호
• /
• pp.53-59
• /
• 2003

Ocean space utilization using VLFS(Very Large Floating Structures) can provide environmental impact free space by allowing sea water flow freely through the floating structure. Use of Pontoon type VLFS for that purpose needs employment of breakwaters for reduction of wave effects. Therefore, in order to maximize advantage of environmental impact free structure, the breakwater should be the one that can allow water flow freely through it, too. In this paper hydroelastic response of a pontoon type structure is analyzed considering breakwaters which allow water flow through its opening at bottom of the breakwaters. Mode superposition technique is used for solving equation of flexible body while interactions between the pontoon and breakwaters is considered based on generalized mode concept. Bi-quadratic nine node higher-order boundary element method is adopted for more accurate numerical treatment near sharp edged body shape. Performance of various combinations of breakwaters is investigated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.809-814
• /
• 2006

In this paper, the modified direct method employing beam transformation technique is proposed in order to efficiently calculate hydroelastic responses of floating structure. Since the proposed method expresses the displacements of three-dimensional structure with those of transformed beam which leads to small number of equations of motion, the method is numerically efficient compared to the conventional direct method. To verify the efficiency of the proposed method a 500 m-long floating structure under wave loads is considered in numerical example. Displacements, bending moments, torsion moments and shear forces are calculated and computing tine is examined. The results are also compared with those of the conventional direct method.