• Journal of Welding and Joining
• /
• 제29권2호
• /
• pp.34-39
• /
• 2011

Nickel-based austenitic alloys such as Alloy 82 and 182 had been employed as the weld metals in nuclear power plants (NPPs) due to their high corrosion resistance as well as good mechanical properties. However, since the 2000s, the occurrence of primary water stress corrosion cracking has been reported in conjunction with these alloys in domestic and oversea NPPs. In the present work, we assumed an imaginary crack at the inner surface of a surge nozzle weld that had previously experienced the outside repair welding, and constructed its finite element model. Finite element analysis was performed with respect to the heat transfer, and then to the residual stress for obtaining the total applied stress distributions. These stress distributions were finally converted to the stress intensity factors for estimating crack growth rate. From the comparison of crack growth rate curves for the cases of no repair welding and outside repair welding, it was found that the outside repair welding did not exhibit negative effect on the crack growth for the surge nozzle under consideration in this work; in both cases, the cracks stopped growing before they became the through-wall cracks.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4647-4658
• /
• 2023

In this paper, elastic-plastic fracture mechanics analysis is performed to determine the critical crack sizes of the multipurpose canister (MPC) manufactured using austenitic stainless steel under dynamic loading conditions that simulate drop accidents. Firstly, dynamic finite element (FE) analysis is performed using Abaqus v.2018 with the KORAD (Korea Radioactive Waste Agency)-21 model under two drop accident conditions. Through the FE analysis, critical locations and through-thickness stress distributions in the MPC are identified, where the maximum plastic strain occurs during impact loadings. Then, the evaluation using the failure assessment diagram (FAD) is performed by postulating an external surface crack at the critical location to determine the critical crack depth. It is found that, for the drop cases considered in this paper, the principal failure mechanism for the circumferential surface crack is found to be the plastic collapse due to dominant high bending axial stress in the thickness. For axial cracks, the plastic collapse is also the dominant failure mechanism due to high membrane hoop stress, followed by the ductile tearing analysis. When incorporating the strain rate effect on yield strength and fracture toughness, the critical crack depth increases from 10 to 20%.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3852-3859
• /
• 2021

This paper presents experimental and numerical analysis results regarding the effects of an incomplete penetration defect on the fatigue lives of socket welded pipes. For the experiment, four-point bending fatigue tests with various defect geometries (defect depth and circumferential length) were performed, and test results are presented in terms of stress-life data. The results showed that for circumferentially short defects, the fatigue life tends to increase with increasing crack depth, but for longer defects, the trend becomes the opposite. Finite element analysis showed that for short defects, the maximum principal stress decreases with increases in crack depth. For a longer defect, the opposite trend was found. Furthermore, the maximum principal stress tends to increase with an increase in defect length regardless of the defect depth.

• 터널과지하공간
• /
• 제32권6호
• /
• pp.518-529
• /
• 2022

DECOVALEX-2023 Task C에서는 6개국 9개 참여 기관들이 스위스 Mont Terri 지하처분연구시설에 서 수행된 FE 실험을 대상으로 열-수리-역학 복합거동 모사를 위한 해석코드 개발을 수행하고 있다. 현재 현장시험 결과와 비교 분석을 위한 Step 1이 진행되고 있으며, 본 연구진은 OGS-FLAC 해석 시뮬레이터를 활용하여 일련의 해석을 진행하였다. 해석 결과 히터 가열에 따른 온도 상승이 잘 구현되었고, 상 변화에 따른 완충재 내 포화도 변화를 관측할 수 있었다. 반면 완충재 흡입력의 과대평가로 완충재 내 상대습도, 온도 변화 및 Opalinus 점토암 내 압력 변화가 현장 결과와 다소간 차이를 나타내는 것을 확인하였다. 이를 통해 완충재 흡입력이 처분시스템 해석 시 유동 해석 결과에 지배적인 영향을 미침을 확인할수 있었으며, 향후 지보재 및 초기 수압 모사 개선을 통해 향상된 결과를 도출하고자 한다. 또한, Opalinus 점토암의 열, 수리, 역학적 이방성이 잘 구현되었으며 해석 결과를 통해 OGS-FLAC 시뮬레이터의 처분시스템 해석 적용성을 확인하였다.

• 조명전기설비학회논문지
• /
• 제19권8호
• /
• pp.77-84
• /
• 2005

수명예측을 하기 위한 기초 자료로 ACSR의 기계적 시험의 일종인 인장시험이 필요하다. 이 인장시험의 결과들이 경년 변화에 대해 어떤 상관관계가 있는가를 파악하여 통계적으로 처리함으로써 수명예측을 해 볼 수 있다. 통계적 처리기법으로는 회귀분석 방법이 일반적이다. 본 연구에서는 ACSR의 인장시험을 건전 전선과 인공화염으로 열화시킨 전선과, 산불 화염 의해 수거된 열화된 전선에 대해 실시하였다. 수명예측의 한계는 캐나다 Ontario Hydro Research의 기준인 정격 인장강도의 20[%] 손실점을 택하였다. 본 연구에 이용된 ACSR의 규격은 ACSR $480[mm^2]$을 대상으로 하여 비선형 회귀분석을 실시하여 예측수명을 제시하였다.

• 대한기계학회논문집A
• /
• 제36권10호
• /
• pp.1235-1239
• /
• 2012

원자력발전소의 원자로압력용기 상부헤드에는 출력제어 및 정지용 제어봉이 통과하는 노즐이 있으며 이 노즐은 상부헤드 노즐과 J 형태의 홈으로서 용접 되어 있다. 최근 외국의 원자력발전소에서 이 용접영역 주변의 노즐 및 용접부에서 일차수응력부식 균열이 발생한 사례가 보고되고 있다. 본 논문에서는 이 용접부의 용접잔류응력과 운전 중에서의 응력상태를 유한요소해석을 이용하여 평가함으로써 고응력 위치를 확인하고 응력관점에서 균열발생 가능성이 높은 지역을 예측하고자 하였다. 해석결과 용접에 의해서 형성된 잔류응력이 수압시험과 운전조건에 의해 다소 변동되기는 하나 응력분포형태는 큰 변화가 없었다. 전반적으로 노즐내면에서는 용접이 시작되는 지점 주변에서 최대 인장응력이 형성되고 노즐외면에서는 용접이 끝나는 지점 주변에서 최대인장응력이 형성되는 것을 확인하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제4권3호
• /
• pp.324-333
• /
• 2011

Phase resonance in a centrifugal compressor was experimentally observed and simulated with a commercial CFD code. It was found that pressure fluctuation at the volute outlet becomes the maximum when the rotational speed of the modes caused by the rotor-stator interaction agrees with the sound velocity. A simple one-dimensional theory is presented to explain the phase resonance in turbomachinery.

• 대한기계학회논문집A
• /
• 제36권10호
• /
• pp.1115-1130
• /
• 2012

최근 원자로 압력용기 상부헤드 관통노즐 J-groove 용접부 주변에서 균열로 인한 냉각수 누출사고가 발행하고 있다. 이러한 사고의 원인은 용접에 의한 인장잔류응력, 농축된 붕산수 및 응력부식에 민감한 재료로 인한 일차수응력부식균열(PWSCC : primary water stress corrosion cracking)인 것으로 판명되었다. PWSCC 평가는 원자로 건전성 평가의 주요 관심사로서 용접에 의해 발생되는 잔류응력을 정확하게 예측함으로써 가능하다. 본 연구에서는 유한요소해석을 이용하여 국내 원자로의 일반적인 J-groove 용접부의 해석절차를 소개하고, 용접해석 관련 변수의 민감도 해석을 통해 잔류응력 예측기법을 제시하고자 한다. 이를 위해 2 차원 및 3 차원 요한요소해석 방법을 바탕으로 변수 민감도 해석을 수행하였으며, 기존 연구결과와 비교를 통해 해석절차 및 방법의 유용성을 검정하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제10권1호
• /
• pp.1-8
• /
• 2017

Bifurcation refers to wye division of penstock to divide the flow symmetrically or unsymmetrically into two units of turbine for maintaining economical, technical and geological substrates. Particularly, water shows irrelevant behavior when there is a sudden change in flow direction, which results into the transition of the static and dynamic behavior of the flow. Hence, special care and design considerations are required both hydraulically and structurally. The transition induced losses and extra stresses are major features to be examined. The research on design and analysis of bifurcation is one of the oldest topics related to R&D of hydro-mechanical components for hydropower plants. As far as the earlier approaches are concerned, the hydraulic designs were performed based on graphical data sheet, head loss considerations and the mechanical analysis through simplified beam approach. In this paper, the multi prospect approach for design of Bifurcation, incorporating the modern day's tools and technology is identified. The hydraulic design of bifurcation is a major function of dynamic characteristics of the flow, which is performed with CFD analysis for minimum losses and better hydraulic performances. Additionally, for the mechanical design, a simplified conventional design method as pre-estimation and Finite Element Method for a relevant result projections were used.

• Steel and Composite Structures
• /
• 제33권1호
• /
• pp.93-109
• /
• 2019

In the present study, vibration analysis of double bonded micro sandwich cylindrical shells with saturated porous core and carbon/boron nitride nanotubes (CNT/BNNT) reinforced composite face sheets under multi-physical loadings based on Cooper-Naghdi theory is investigated. The material properties of the micro structure are assumed to be temperature dependent, and each of the micro-tubes is placed on the Pasternak elastic foundations, and mechanical, moisture, thermal, electrical, and magnetic forces are effective on the structural behavior. The distributions of porous materials in three distributions such as non-linear non-symmetric, nonlinear-symmetric, and uniform are considered. The relationship including electro-magneto-hydro-thermo-mechanical loadings based on modified couple stress theory is obtained and moreover the governing equations of motion using the energy method and the Hamilton's principle are derived. Also, Navier's type solution is also used to solve the governing equations of motion. The effects of various parameters such as material length scale parameter, temperature change, various distributions of nanotube, volume fraction of nanotubes, porosity and Skempton coefficients, and geometric parameters on the natural frequency of double bonded micro sandwich cylindrical shells are investigated. Increasing the porosity and the Skempton coefficients of the core in micro sandwich cylindrical shell lead to increase the natural frequency of the structure. Cylindrical shells and porous materials in the industry of filters and separators, heat exchangers and coolers are widely used and are generally accepted today.