• 한국수자원학회논문집
• /
• 제49권9호
• /
• pp.741-748
• /
• 2016

개착식 하상여과에 대해서 실험실 규모의 모형을 구축하고 중사, 왕사, 화산석, 자갈에 대한 단일 여재를 구성하였다. 실험을 통해 투수계수 및 하상 여과에 대한 취수량을 추정하고, 지하수 유동 모델링인 Visual MODFLOW를 통해 탁도 변화에 따라 수정된 투수계수를 적용하고 미치는 영향을 분석하였다. 각 여재마다 22개의 수정 투수계수 시나리오가 적용되었다. 전체 모델링에서 최소 오차는 화산석(2~5 mm)을 여재로 한 경우 상부에서부터 3개 지층에 대해서 20% 감소된 투수계수를 적용한 시나리오다. 이는 화산석의 특성상 탁도를 유발하는 황토가 여재에 흡착되어 상부에서 3번째 지층까지 영향을 미치는 것으로 추정되었다. 또한 입자의 크기가 작은 중사의 경우 5% 감소된 투수계수를 상부에서 두 번째 지층까지 적용한 시나리오에서도 작은 오차 값을 나타냈다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.573-574
• /
• 2006

This research deals with the wave transmission and dissipation problems for two dimensional regular waves and s vertical circular cylindersr. Using the unsteady mild slope equation, a numerical model has been developed to calculate the reflection and transmission of regular waves from a multiple-row vertical circular cylinders. In addition hydraulic model experiments have been conducted with different values of properties between the cylinders and opening ratio (distances) between the rows of the cylinders. It is found that the transmission coefficients decrease with decreasing the opening ratio and increasing the rows of vertical cylinders. Comparison between hydralic and numerical experiments results shows resonable agreement.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.137-142
• /
• 2004

Recently. the number of the use of Digital Photogrammetry is increasing, and photogrammetry instruments are developing rapidly and the pression is improving continuously. In this study, using the Rollei d7 metric that is a measurement digital camera which has capacity of keeping numerial value by itself and easy carrying, we analyze the 3 dimensional hydraulic experiment model. First, we calculated RMSE by carrying out bundle adjustment. Second, we try to find a effective 3D DEM with the Kriging Interpolation, Third make a comparative study the DEM of the Triangulation with the DEM of the close-range digital photogrammetry.

• 산업기술연구
• /
• 제25권B호
• /
• pp.19-25
• /
• 2005

To use land more efficiently under urbanization trend, Kangwon Province often covers open channels of creeks and uses them as parking lots or roads. A covered open channel section tends to form a rectangular culvert. Therefore, a creek with covered open channels can function as a storm drain. At the time of light rainfall, there are no significant differences except water flowing pattern between a creek with a covered open channel and a creek without it. Recently, however, the frequent occurrence of heavy rainfalls limited at a small, definite area has become problematic. When the heavy rainfall causes the carrying capacity of a creek to be exceeded,the creek with covered open channel has a more serious problem than the creek without it has. Therefore, we made an interpretation of data and conducted hydraulic model experiment to come up with economical solution to this problem.

• 한국수자원학회논문집
• /
• 제44권6호
• /
• pp.461-470
• /
• 2011

Abrupt and gradual levee breach analyses on the flat domain were implemented by laboratory experiments and numerical simulations. To avoid the reflective wave from the side wall the experiment was performed in a large domain surrounded by waterway. A numerical model was developed for solving the two-dimensional gradual levee breach flow. The results of the numerical simulation developed in this study showed good agreement with those of the experimental data. However, even if the numerical schemes effectively replicated the trends of the observed water depth for the first shock, there were little differences for the second shock. In addition, even though the model considered the Smagorinsky horizontal eddy viscosity, the location and height of the hydraulic jump in the numerical simulation were not fairly well agree with experimental measurements. This shows the shallow water equation solver has a limitation which does not exactly reproduce the energy dissipation from the hydraulic jump. Further study might be required, considering the energy dissipation due to the hydraulic jump or transition flow from reflective wave.

• 한국해안해양공학회지
• /
• 제18권2호
• /
• pp.166-177
• /
• 2006

본 연구에서는 Boussinesq방정식을 지배방정식으로 한 기존의 강비선형 모형과 고차 모형(다층모형)의 정확도를 각각 검토하였으며, 사용된 다층모형은 Lynett과 Liu(2004a)에 의해 개발된 것이다. 수치모형으로 shelf 지형에서의 쇄파를 모의하였으며, 실험에 적용된 파랑의 비선형성(${k_0}{A_0}$)은 0.029~0.180 범위이다. 전반적으로 2층 모형의 해석결과가 실험결과와 잘 일치하였다. 1층모형의 경우에는 쇄파점 가까운 곳에서부터 파고가 빨리 증폭이 된 반면, 2층모형의 파고증폭 정도는 수리실험결과와 잘 부합하였다.

• 제어로봇시스템학회논문지
• /
• 제9권2호
• /
• pp.124-130
• /
• 2003

The electro-hydraulic servo system with a servo valve is applied widely in force control. However, the composition of control system using a servo valve is difficult due to nonlinearities in the servo valve, such as square-root terms in flow equation. The electro-hydraulic servo system using a DDV(Direct Drive Valve) instead of a servo valve was proposed and it's characteristics was estimated. The DDV and whole system are modelled by parameter identification using the input-and-output data, then the models are verified by the comparison of simulation with experiment. Also, the state feedback controller has been designed based on this model, then the performance of the electro-hydraulic force servo system using a DDV is evaluated by simulation and experimental results.

• 대한기계학회논문집A
• /
• 제35권6호
• /
• pp.677-682
• /
• 2011

본 연구에서는 유압브레이커의 시뮬레이션 결과와 실제 실험 결과의 비교를 통해 시뮬레이션의 타당성을 검증하였다. 유압브레이커의 성능 향상을 위하여 비교적 설계 변경이 용이한 부품의 제원을 설계인자로 선정하였고, 요인시험과 회귀분석을 이용하여 각각의 설계 인자가 유압브레이커의 성능에 미치는 영향을 규명하였다. 본 연구의 결과로 기존 유압브레이커의 성능을 최대화 시킬 수 있는 방안을 제시하였다.

• 터널과지하공간
• /
• 제6권1호
• /
• pp.30-38
• /
• 1996

A two dimensional analysis program for groundwater flow in fractured network was developed to analyze the influence of discontinuity characteristics on groundwater flow. This program involves the generation of discontinuities and also connectivity analysis. The discontinuities were generated by the probabilistic density function(P.D.F.) reflecting the characteristics of discontinuities. And the fracture network model was completed through the connectivity analysis. This program also involves the analysis of groundwater flow through the discontinuity network. The result of numerical experiment shows that the equivalent hydraulic conductivity increased and became closer to isotropic as the density and trace length increased. And hydraulic head decreased along the fracture zone because of much water-flow. The grouting increased the groundwater head around cavern. An analysis of groundwater flow through discontinuity network was performed around underground oil storage cavern which is now under construction. The probabilistic density functions(P.D.F) were obtained from the investigation of the discontinuity trace map. When the anisotropic hydraulic conductivity is used, the flow rate into the cavern was below the acceptable value to maintain the hydraulic containment. But when the isotropic hydraulic conductivity is used, the flow rate was above the acceptable value.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2728-2735
• /
• 2022

The research on the flow and heat transfer characteristics of lead bismuth(LBE) is significant for the thermal-hydraulic calculation, safety analysis and practical application of lead-based fast reactors(LFR). In this paper, a new CFD model is proposed to solve the thermal-hydraulic analysis of LBE. The model includes two parts: turbulent model and turbulent Prandtl, which are the important factors for LBE. In order to find the best model, the experiment data and design of 19-pin hexagonal rod bundle with spacer grid, undertaken at the Karlsruhe Liquid Metal Laboratory (KALLA) are used for CFD calculation. Furthermore, the turbulent model includes SST k - 𝜔 and k - 𝜀; the turbulent Prandtl includes Cheng-Tak and constant (Pr_t =1.5,2.0,2.5,3.0). Among them, the combination between SST k - 𝜔 and Cheng-Tak is more suitable for the experiment. But in the low Pe region, the deviation between the experiment data and CFD result is too much. The reason may be the inlet-effect and when Pe is in a low level, the number of molecular thermal diffusion occupies an absolute advantage, and the buoyancy will enhance. In order to test and verify versatility of the model, the NCCL performed by the Nuclear Thermal-hydraulic Laboratory (Nuthel) of Xi'an Jiao tong University is used for CFD to calculate. This paper provides two verification examples for the new universal model.