• 한국주조공학회지
• /
• 제3권1호
• /
• pp.28-36
• /
• 1983

본 실험에서는 고정수압하에서 응고한 Al-l0% Mg합금의 조직 및 기계적 성질에 미치는 가압력의 영향을 조사하기 위하여 압력을 $0㎏f/cm^2$, 500$kgf/cm^2$, $1500㎏f/cm^2$ 및 $2000㎏f/cm^2$로 변화시키면서 냉각곡선, 조직검사, 기계적시험 및 비중 측정을 하여 얻은 결론은 다음과 같다. 1. 가압력이 증가할수록 합금의 냉각속도는 증가하였다. 2. 기공 및 수축공의 발생은 가압에 의해 억제되었다. 3. 가압력이 증가할수록 dendrite arm spacing은 감소하였다. 4. 기계적 성질 및 비중은 가압력이 증가함에 따라 증가하였다.

• 산업기술연구
• /
• 제28권B호
• /
• pp.111-116
• /
• 2008

Since the hydraulic fracturing field testing method was introduced first to Korean geotechnical engineers in 1994, there have been lots of progresses in a hardware system as well as an interpretation tool. The hydrofracturing system of first generation was the pipe-line type, and it has been developed to a wire-line system at their second generation. The current up-to-date system is more compact and is able to be operated by all-in-one system. With a progress in a hardware system, the software for analyzing in-situ stress regime has also been progressed. The shut-in pressure, which is the most ambiguous parameter to be obtained from hydrofracturing pressure curves, can now be acquired automatically from the various methods. While the hardware and software for hydrofracturing tests are being developed during the last decade, the author could accumulate the field test results which can cover the almost whole area of South Korea. Currently these field data are used widely in a feasibility study or a preliminary design step for tunnel construction in Korea. Regarding the difficulties in a site selection and a test performance for the in-situ stress measurement at an off-shore area, the in-situ stress regime obtained from the field experiences in the land area can be used indirectly for the design of a sub-sea tunnel. From the hydrofracturing stress measurements, the trend of magnitude and direction of in-situ stress field was shown identically with the geological information in Korea.

• 한국분무공학회지
• /
• 제12권2호
• /
• pp.115-122
• /
• 2007

The spray characteristics and drop size measurements have been experimentally studied in liquid jets injected into subsonic crossflow. With water as fuel injection velocity, injection angle and atomize. internal flows were varied to provide of jet operation conditions. The injector internal flow was classified as three modes such as a non-cavitation flow, cavitation, and hydraulic flip flows. Pulsed Shadowgraph Photography measurement was used to determine the spatial distribution of the spray droplet diameter in a subsonic crossflow of air. And this study also obtains the SMD (Sauter Mean Diameters) distribution by using Planar Liquid Laser Induced Fluorescence technique. The objectives of this research are get a droplet distributions and drop size measurements of each condition and compare with the other flow effects. As the result, This research has been showned that droplet size were spatially dependent on air-stream velocity, fuel injection velocity, injection angle effects, and normalized distance from the injector exit length(x/d, y/d). There are also different droplet size characteristics between cavitation, hydraulic flip and the non-cavitation flows.

• 한국환경과학회지
• /
• 제21권4호
• /
• pp.471-478
• /
• 2012

In this study, the flow characteristic analysis at the curved-channel of the actual channel section is compared and reviewed using the 2D RMA-2 model and the 3D FLOW-3D model. the curve section with curve rate 1.044 in the research section is analyzed applying the frequency of he project flood of 100 years. According to the result, the issue for the application of the FLOW-3D Model's three-dimensional numeric analysis result to the actual river is found to be reviewed with caution. Also, application of the 3D model to the wide basin's flood characteristic is determined to be somewhat risky. But, the applicability to the hydraulic property analysis of a partial channel section and the impact analysis and forecast of hydraulic structure is presumed to be high. In addition, if the parameters to reflect the vegetation of basin and the actual channel, more accurate topological measurement data and the topological data with high closeness to the current status are provided, the result with higher reliability is considered to be drawn.

• 항공우주기술
• /
• 제11권1호
• /
• pp.57-67
• /
• 2012

나로호 발사를 위해 사용된 발사대 지상 설비중 하나인 발사대 온도 제어 시스템의 시스템 설계 자료를 분석하였다. 러시아에서 한국항공우주연구원에 제공한 CDP 자료를 참고하여 발사대 온도 제어 시스템의 공기 생산부(UPV), 공기 가열부(UNG) 및 공기 분배부(URG)의 열수력 설계를 분석하였다. 또한 공기 가열부 및 공기 분배부에 대한 수치 해석을 수행하고 측정 결과와 비교하여 두 결과가 일치함을 확인하였다. 마지막으로 발사대 온도 제어 시스템의 단열 설계 기법을 분석하였다. 본 연구를 통해 검증된 기법은 앞으로 한국형 발사체를 위한 시스템 수정 및 설계시 유용하게 사용될 것이다.

• 대한기계학회논문집B
• /
• 제26권1호
• /
• pp.1-11
• /
• 2002

Flow of fluid has been studied in various fields of fluid engineering. To hydraulic engineers, the unsteady flow such as pulsation and liquid hammering in pipes has been considered as a serious trouble. So we are supposed to approach the formalized mathematical model by using more exact momentum equation for fluid transmission lines. Most of recent studies fur pipe line have been studied without considerations of variation of viscosity and temperature, which are the main factors of pressure loss causing the friction of fluid inside pipe line. Frequency response experiments are carried out with use of a rotary sinusoidal flow generator to investigate wave equation take into account viscosity and temperature. But we observed that measured value of gains are reduced as temperature increased. And it was respectively observed that the measured value of gains are reduced and line width of gain is broadened out, when temperature was high in the same condition. As we confessed, pressure loss and phase delay are closely related with the length, diameter and temperature of pipe line. In addition, they are the most important factors, when we decide the momentum energy of working fluid.

• 한국수자원학회논문집
• /
• 제34권5호
• /
• pp.543-549
• /
• 2001

수리학적 하도추적으로부터 하천유량을 간접추정하였다. 짧은 하천구간의 세 지점 연속수위자료와 하천 단면 자료만을 사용하여 조도계수 추정b과 하천유량 계산이 가능하였다. 유량의 간접추정 과정에서, 상류-하류 경계조건을 수위-수위 조건으로 사용하였다. 미국 미시시피 강의 상류 구간 자료가 사용되었고 수리학적 하도추적에는 DWO-PER (operational dynamic wave model)를 이용하였다. DWOPER 모형에서 수정 Newton-Raphson법에 의한 조도계수 추정과정을 개선하기 위하여 SCE-UA 전역최적화 기법을 적용하였으며, SCE-UA 기법의 결과가 적은 오차를 보였다. 특정 홍수에 대하여 유량을 추정한 결과, 몇 개를 제외한 대부분의 계산유량이 10% 이내의 오차를 보였다.

• Geomechanics and Engineering
• /
• 제2권3호
• /
• pp.213-227
• /
• 2010

Compacted layers of sand-bentonite mixtures have been proposed and used in a variety of geotechnical projects as engineered barriers for the enhancement of impervious landfill liners, cores of zoned earth dams and radioactive waste repository systems. This paper presents a study on the valorization of local materiel such as dune sand from Laghouat region and mine bentonite intended for the realization of liner base layers in the conception of insulation barriers for hazardous waste centers. In the practice we try to get an economical mixture that satisfies the hydraulic and mechanical properties specified by regulation rules. The effect of the bentonite additions on the mixture is reflected by its capability of clogging the matrix pores upon swelling. In order to get an adequate dune sand-bentonite mixture, an investigation on hydraulic and mechanical behaviours is carried out in this study for different mixtures. Using oedometer test, the adequate bentonite addition to the mixture, which satisfies the conditions on permeability, is found to be around 12% to 15%. These results are also confirmed by direct measurement using triaxial cell.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2381-2384
• /
• 2008

The heat exchange between the Borehole Heat Exchanger(BHE) and the surrounding ground depends directly on ground thermal conductivity k at the certain site. The k is thus a key parameter in designing BHE and coupled geothermal heat pump systems. Currently, although a thermal hydraulic Response Test(TRT) is mostly used in practice, the thermal hydraulic TRT needs additional power and is generally time-consuming. A new, simple wireless probe for hi-speed k determination was introduced in this paper. This technique using a wireless probe is less time-consuming and requires no external source of energy for measurement and predicts local thermal properties by measuring soil temperatures along the depth. Measured temperature data along the depth was analyzed. As a result, the electronic wireless probe can replace the conventional hydraulic TRT method after carrying out the additional research on a lot of local heat flow, etc.

• 항공우주기술
• /
• 제9권1호
• /
• pp.72-77
• /
• 2010

필라멘트 와인딩으로 제작된 고체 모터 연소관의 구조강성저하 평가 및 파열특성을 확인하기 위한 수압시험을 수행하였다. 본 연소관의 파손 요구조건으로서 운용 중 최대 예상압력(MEOP)의 1.5배 이상의 압력에서 실린더 파손이 일어나야함을 제시하였다. 해석 결과 연소관의 내부압력이 2088psig 일 때 실린더층의 섬유가 끊어지는 것으로 나타났으며 수압시험을 수행하여 2200psig 수준에서 실린더 부위가 파손됨을 검증하였다. 또한 제작 후 1년 정도 경과 후에도 강성저하가 없음을 알 수 있었다.