• 제목/요약/키워드: Hydraulic hose assembly

검색결과 10건 처리시간 0.027초

유압 호스의 경로 생성 및 피팅 배열각 설계 (Design for Hydraulic Hose Routing Pathes and Fitting Angles)

  • 김연수;김재정
    • 한국CDE학회논문집
    • /
    • 제10권1호
    • /
    • pp.40-48
    • /
    • 2005
  • A hydraulic hose is an important part of the hydraulic system which transmits power using pressurized fluids. It allows relative motion between components at each end of the hose assembly, and it is much easier to route a hose assembly than it is to bend and install a rigid tubing assembly. Unnecessary loads, which drop the hose's pressure capability and shorten service life, depend on a hose-routing. Therefore, the Hydraulic system designers must be aware to consider unnecessary load does not affect the here. For this consideration in an early stage of the design process, CAD system must support the hose assembly routing design function which is to generate routing path and design fitting angle properly. This paper proposes 2 methods. One is to generate curves that are similar to routing paths of the real hose assembly using the energy minimization method and the optimization method. The other is to design fitting angles that are important design elements of a hose assembly using the Parallel Transport Frame. To implement the proposed methods above, commercial CAD software, CATIA has been integrated with our program.

Life Prediction of High Pressure Hydraulic Hose Assemblies by the Impulse Test

  • KIM, Hyoung-Eui;LEE, Yong-Bum;Kwon, Young-Il
    • Corrosion Science and Technology
    • /
    • 제3권5호
    • /
    • pp.209-215
    • /
    • 2004
  • Flexible hydraulic hose assembly that consists of hose and joints is used widely on various construction heavy equipments, agricultural machines, motor vehicles, and industrial heavy machines that require flexibility on hydraulic pipelines. It is classified by the maximum usage pressure which is determined by the winding layers of coiling steel wire and the inner diameter of the hoses. In this paper, we designed and performed an accelerated life test for assessing the reliability of a flexible hydraulic hose assembly. In the proposed accelerated life test, typical impulse pressure testing method is applied with the half omega flexing operation to simulate the practical flexing motion of the hose assembly.

충격압력을 이용한 고압용 유압호스 조립체의 수명분석 (Life Analysis of High Pressure Hydraulic Hose Assemblies by Impulse Test)

  • 이용범;김형의;유영철;박종호;고재명
    • 유공압시스템학회논문집
    • /
    • 제1권1호
    • /
    • pp.10-16
    • /
    • 2004
  • The failures such as leakage and burst stemmed from the repetitive motions of bending and stretching of the assembly of hydraulic hose in construction machines, agriculture machines, vehicles, and industrial heavy machines can induce big troubles. Therefore, the hydraulic hose itself eventually requires an estimation of life to operate the hydraulic system safely. In this research, we have qualitatively selected the efficient test items by the analysis of the life and potential failures of hydraulic hose. We have used more than seven of hydraulic hoses simultaneously for the research. We have applied impulse pressure and half omega flexing motions to the accelerated life testing Test results have been expressed by employing weibull plot.

  • PDF

자동차 유압브레이크용 고무호스의 내구성 시험 및 미세손상에 관한 연구 (Durability Test and Micro-Damage Formation of Rubber Hose for Automotive Hydraulic Brake)

  • 곽승범;최낙삼;임영한
    • Composites Research
    • /
    • 제21권1호
    • /
    • pp.40-45
    • /
    • 2008
  • 자동차용 유압브레이크 고무호스 어셈블리 제품은 자동차에 장착되어 실제로 사용 중에 가압, 굽힘, 비틀림, 열하중 등의 복합적인 스트레스를 받는다. 고무호스의 재질은 EPDM(ethylene-propylene diene monomer)고무와 PVA(polyvinyl acetate)섬유 보강층 그리고 중간고무로 NR(natural rubber)고무가 사용되고 있다. 고무호스 어셈블리 제품의 내구성과 파괴 메커니즘을 조사하기 위해 굽힘과 비틀림의 반복하중 사이클 수가 10만, 20만, 30만, 40만, 최종파열 사이클 수까지 되도록 시험하였다. 유압브레이크 고무호스의 초기크랙 발생을 알아보기 위해 제품 시험편을 다이아몬드 휠커터를 이용하여 수직 절단하여 폴리싱한 후 광학현미경과 주사형 전자현미경(SEM)으로 단면을 관찰하였다. 40만 사이클의 피로하중을 받은 시험편을 보면 외면고무와 PVA섬유 사이의 계면을 따라 길이 1mm의 층간분리가 일어났으며, 이러한 손상은 외면고무의 표피층으로 균열을 진전시켜 고무호스를 최종적으로 찢어지게 하는 것이다.

압력과 온도 복합가속모형을 적용한 유압호스 조립체 수명특성 연구 (A Study of Life Characteristic of Hydraulic Hose Assembly by Adopting Complex Accelerated Model with Acceleration Factors of Pressure and Temperature)

  • 이기천;김형의;조유희;김재훈
    • 대한기계학회논문집A
    • /
    • 제34권11호
    • /
    • pp.1697-1703
    • /
    • 2010
  • 유압호스는 건설기계, 자동차, 항공기 등 각종 기계의 유압장치에서 동력을 전달하기 위한 배관으로 사용된다. 산업의 전분야에서 에너지를 전달하기 위한 배관의 한 종류로서 진동이나 충격 등으로부터 시스템을 보호하는 역할을 한다. 여러 가지 외부 환경 조건으로부터 시스템을 유지하기 위해서는 호스 조립체에서 온도와 압력 등의 외부 환경 조건에 대한 내성을 가지고 있어야만 한다. 본 연구에서는 기존에 호스 조립체에 대해 온도 또는 압력 중 한 가지 인자를 고려한 가속모형을 제시한 연구는 있었지만 두 가지 인자를 동시에 고려한 가속모형은 제시하지는 못하였으므로, 호스 조립체의 압력과 온도를 모두 고려한 복합가속 모형식을 제안하는 것을 목적으로 한다.

고압호스 조립체의 가속수명시험에 관한 연구 (Study of the high pressure hose assemblies by accelerated life test)

  • 이기천;이용범
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권8호
    • /
    • pp.886-892
    • /
    • 2013
  • 고압호스 조립체는 건설기계, 선박, 항공기, 산업기계, 공작기계 및 자동차 등의 각종 유압장치에 널리 유압배관으로 사용된다. 이는 유연성이 필요한 부분에 유체동력($P^*Q$)으로 전달해야 함으로서, 고장이 발생할 경우는 유압시스템 전체가 작동이 불가능함으로서 신뢰성이 매우 중요한 부품이다. 가속 수명 시험 데이터는 와이블분포 분석을 통해서 형상 모수를 추종 하였다. 본 시험연구에서는 실제 가속수명시험 조건의 충격압력과 반복 굽힘을 변화시켜 시험시간을 감소시켰다. 가속수명시험 모형은 GLL(generalized linear)모형을 사용하였으며, 충격압력과 반복 굽힘에 대한 가속지수는 각각 6.64와 4.46으로 확인되었다. 또한 시험 결과에 대한 분석결과 형상모수(${\beta}$)는 6.19이며, 실제 사용조건인 35 MPa과 굽힘 반경 R100 mm를 적용하였을 경우 척도모수(${\eta}$)는 $1.035{\times}108$사이클로 확인되었다.

온도.비열 가속모형을 적용한 유압호스조립체 수명특성 연구 (A Study of the Life Characteristic of Hydraulic Hose Assembly by Adopting Temperature-Nonthermal Acceleration Model)

  • 이기천;김형의;조유희;심성보;김재훈
    • 한국신뢰성학회지:신뢰성응용연구
    • /
    • 제11권3호
    • /
    • pp.235-244
    • /
    • 2011
  • Hydraulic hose assemblies deliver a fluid power in various oil pressure equipment such as construction machinery, automobile, aircraft, industrial machinery, machine tools and machinery for ships. Also, they are widely used as pipes in oil pressure circuit. When we estimate their lifetime, it is essential to conduct an accelerated life test by choosing the factor that suits the usage condition of the test object since traditional test method for estimating lifetime under the influence of various external factors incurs hardship in terms of time and expenses. The objective of this study is to propose an acceleration model that takes both temperature and pressure without flexing condition into consideration. The lifetime is estimated by applying the proposed temperature-nonthermal acceleration model to the test data. And we compare the proposed temperature-nonthermal acceleration model and the accelerated life equation suggested by John(1994).

항공기용 연료호스의 빔 시일 피팅의 형상변화에 따른 접촉특성에 관한 연구 (A Study on Contact Characteristics by the Geometry Variation of Beam Seal Fitting of an Aircraft Fuel Hose)

  • 전준영;김병탁
    • 한국기계가공학회지
    • /
    • 제12권6호
    • /
    • pp.101-108
    • /
    • 2013
  • An aircraft fuel hose is a kind of high pressure hose, and generally consists of a nipple, a socket, an inner tube, and a reinforcement layer to increase the tensile strength. Especially the nipple supports the other components in manufacturing stages such as the swaging or crimping processes however, the nipple also serves to prevent leakage in cases of hose engagement with a hydraulic system. To ensure the seal of the hose assembly, a beam seal fitting with metal-to-metal contact is usually adopted at the end of a nipple. Therefore, the geometry of the beam is an important parameter to be determined to make sure there is sufficient contact force. This study aims to investigate the effects of beam seal geometry on the contact force by changing the inclined angle and the thickness of the beam. The results reveal that the proper thickness and inclined angle of the beam seal are 0.45 mm and $8.5^{\circ}$, respectively.

초고압 시스템의 안전성 확보에 대한 연구 (A Study of Safety Acquirement for an Assessment of Ultra High Pressure System)

  • 이기천;김형의;김재훈
    • 한국안전학회지
    • /
    • 제25권5호
    • /
    • pp.7-14
    • /
    • 2010
  • Ultra high pressure system, which can be generally increased over 1,000bar, needs to have sealing mechanism to protect leakage and selection of the materials used in the intensifier. Components such as pressure vessel, hydraulic hose assembly, accumulator, hydraulic cylinder, hydraulic valve, pipe, etc., are tested under the impulse-pressure conditions. Components need to be tested under 1.5 to 3 times of rated pressure to check the tolerance even though rated pressure range of these components are not ultra high pressure. So, the ultra high pressure system needs to be equiped to test components. In this study, safety assessments of ultra high pressure system which are using failure analysis of components, changing the types of the control system, and finite element analysis with static condition, are investigated.

유압 충격압력 발생기의 시스템 설계와 성능평가 (System Design and Performance Test of Hydraulic Intensifier)

  • 김형의;이기천;김재훈
    • 대한기계학회논문집A
    • /
    • 제34권7호
    • /
    • pp.947-952
    • /
    • 2010
  • 압력용기, 유압호스 조립체, 어큐뮤레이터, 유압실린더, 유압밸브, 파이프 등의 제품들의 시험은 일반적으로 ISO와 SAE에서 정의되는 충격압력 조건들로 작동되고 있다. 충격압력 시험 장비는 높은 압력, 정확한 제어 시스템, 장기간 사용할 수 있는 수명을 가지는 것이 요구되며, 언급된 사항들은 유압 시스템에서 보다 높은 압력이 발생되어지는 충격압력 발생기를 제작하는데 필요하다. 충격압력 시험기는 제어는 편리하지만 높은 가격인 서보밸브 제어 시스템이 적용되었다. 제어 시스템의 적용은 시험하는 제품들에 영향을 주는 압력의 파형을 생성한다. 본 연구는 유량과 압력, 압력의 상승속도를 고려한 충격압력 발생시스템 설계 및 제작 과정을 연구하는 것을 목적으로 한다. 이것은 또한 결과로써 시스템에서 초고압의 압력을 발생시키는 압력 파형을 얻을 수 있었다.