• 한국재료학회지
• /
• 제22권11호
• /
• pp.598-603
• /
• 2012

MgO based cement for the low-temperature calcination of magnesite required less energy and emitted less $CO_2$ than the manufacturing of Portland cements. Furthermore, adding reactive MgO to Portland-pozzolan cement can improve their performance and also increase their capacity to absorb atmospheric $CO_2$. In this study, the basic research for magnesia cement using $MgCO_3$ and magnesium silicate ore (serpentine) as starting materials was carried out. In order to increase the hydration activity, $MgCO_3$ and serpentinite were fired at a temperature higher than $600^{\circ}C$. In the case of $MgCO_3$ as starting material, hydration activity was highest at $700^{\circ}C$ firing temperature; this $MgCO_3$ was completely transformed to MgO after firing. After the hydration reaction with water, MgO was totally transformed to $Mg(OH)_2$ as hydration product. In the case of using only $MgCO_3$, compressive strength was 35 $kgf/cm^2$ after 28 days. The addition of silica fume and $Mg(OH)_2$ led to an enhancements of the compressive strength to 55 $kgf/cm^2$ and 50 $kgf/cm^2$, respectively. Serpentine led to an up to 20% increase in the compressive strength; however, addition of this material beyond 20% led to a decrease of the compressive strength. When we added $MgCl_2$, the compressive strength tends to increase.

• 자원리싸이클링
• /
• 제28권1호
• /
• pp.32-39
• /
• 2019

본 연구에서는 석고의 형태로 황산염이 혼입된 알칼리 활성 슬래그의 수화반응에 대해, 깁스 최소화 에너지 개념을 이용한 반응계산 결과가 계산 조건에 따라 어떻게 달라지는지에 대해 확인하였다. 계산을 위한 변수로는 황화물의 고려 여부, AFt/AFm 상의 생성가능성 여부, 대기 중 산소의 반응기여 여부 등을 검토하였다. 계산결과, 실제 위의 다양한 조건의 변화에도 불구하고 공극량, 화학수축과 같이 이후 배합의 성능에 영향을 미칠 수 있을 만한 값 들은 크게 차이가 발생하지 않았는데, 이 변수들에 의한 변화폭은 물결합재비에 의한 변화폭에 비해 월등히 작은 값이었다. 생성되는 물질들의 종류 및 양은 일부 초기조건 설정에 따라 변화할 수 있으나, 가장 주요한 수화물인 C-(N-)A-S-H의 생성량에는 별다른 영향을 미치지 않았다.

• 자원리싸이클링
• /
• 제15권3호
• /
• pp.46-57
• /
• 2006

본 연구는 불순물을 포함하는 인산부생석고로부터 정제석고를 얻을 목적으로 수행되었다. 인산부생석고를 일정조건에서 탈수하고 수화시켜 석고성분만을 선택적으로 미립화 시킨 다음 325mesh로 습식사분하여 사하산물로 정제석고를 얻었다. 이 과정에서 석고의 회수율에 미치는 탈수온도, 탈수시간, 탈수율, aging시간, 수화농도, 수화온도, 초음파조사시간, 첨가제 등의 영향을 조사하였다. 실험결과, 인산부생석고를 $140^{\circ}C$에서 6시간 동안 건조하여 완전히 무수석고 상태가 되도록 탈수 한 다음, 슬러리 농도 $3{\sim}10%,\;20{\sim}30^{\circ}C$의 수화온도, 수화시간 2시간의 조건에서 수화하여 사분하면 석고회수율이 95% 이상이 됨을 알았다. 회수된 석고의 품위는 회수율이 높을수록 높아지는 경향을 보였으며 회수율이 90%이상 일 때 품위는 $94{\sim}96%$를 보였다. 이 밖에도 석고회수율을 높이기 위해서는 탈수된 석고가 공기와 접촉하는 시간이 16시간을 넘어서는 아니 되며, 구연산나트륨을 0.005M 정도 첨가하는 것과, 수화반응 초기에 $5{\sim}10$분 동안 초음파를 조사하는 것이 매우 유용한 수단임을 알았다.

• Preventive Nutrition and Food Science
• /
• 제17권1호
• /
• pp.87-91
• /
• 2012

Three oat cultivars and one oat breeding line were evaluated for chemical, hydration and pasting properties. Protein, starch and ${\beta}$-glucan levels ranged 11.13~14.37, 56.37~64.86 and 3.44~4.76%, respectively. The oat cultivars Daeyang and Seonyang contained higher ${\beta}$-glucan levels of 4.76 and 4.35%. The Daeyang variety had a higher water absorption index (WAI) of 2.83~3.35 (g/g), but a lower water solubility index (WSI) of 8.67~11.08%. Daeyang and Seonyang cultivars showed higher peak and trough viscosity, but lower breakdown and setback, indicating that they easily swell, and thus could possibly provide the desirable viscosity of an oat product. The ${\beta}$-glucan levels were correlated positively with WAI, peak and trough viscosity, and negatively to WSI, breakdown and setback viscosity.

• Safety and Health at Work
• /
• 제8권4호
• /
• pp.327-328
• /
• 2017

Despite provision of drinking water as the most common method of occupational heat stress prevention, there remains confusion in hydration messaging to workers. During work site interactions in a hot and humid climate, workers commonly report being informed to consume tepid fluids to accelerate rehydration. When questioned on the evidence supporting such advice, workers typically cite that fluid absorption is delayed by ingestion of chilled beverages. Presumably, delayed absorption would be a product of fluid delivery from the gut to the intestines, otherwise known as gastric emptying. Regulation of gastric emptying is multifactorial, with gastric volume and beverage energy density the primary factors. If gastric emptying is temperature dependent, the impact of cooling is modest in both magnitude and duration (${\leq}5$ minutes) due to the warming of fluids upon ingestion, particularly where workers have elevated core temperature. Given that chilled beverages are most preferred by workers, and result in greater consumption than warm fluids during and following physical activity, the resultant increased consumption of chilled fluids would promote gastric emptying through superior gastric volume. Hence, advising workers to avoid cool/cold fluids during rehydration appears to be a misinterpretation of the research. More appropriate messaging to workers would include the thermal benefits of cool/cold fluid consumption in hot and humid conditions, thereby promoting autonomy to trial chilled beverages and determine personal preference. In doing so, temperature-based palatability would be maximized and increase the likelihood of workers maintaining or restoring hydration status during and after their work shift.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.289-292
• /
• 2004

This study was performed to know effective control of crack occurred by hydration heat, restraint of multiplication of hydration heat, through mechanical test, strength test and crack control test using fluosilicate salt based anti-crack agent made from by-product during phosphoric acid manufacturing process. Mix proportions for experiment were modulated at 0.495 of water to cement ratio and addition amount of fluosilicate salt based anti-crack agent to $1.0\%$. Condensation time was late and compressive strength of hardened concrete cured at several days was executed to evaluate characteristics of crack control for concrete. It is ascertained that characteristics of crack control for concrete could be improved by an adequate addition of fluosilicate salt based anti-crack agent.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.737-740
• /
• 2006

A cement which is used in construction and a concrete which is a hydration product of cement is considered anti-environmental materials because of lots of $CO_2$ emission in progress of producing and making them. But a concrete absorbs the $CO_2$ gas in atmosphere after hydration and in its lifetime. Based on Papadakis' theses, this research is carried on calculation of the $CO_2$ absorption quantity in concrete. Also, the emission of $CO_2$ was calculated by cement manufacture. As a result, It is said that the $CO_2$ which was emitted during cement manufacturing, was absorbed the 53% of emission quantity by the carbonation of concrete.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권4호
• /
• pp.48-56
• /
• 2022

시멘트계 재료의 응결시간 제어는 초기 콘크리트 성능 확보를 위한 중요한 평가 요소 중 하나이다. 최근 평균 기온 상승으로 특정 수화물 생성 억제 및 응결시간 제어를 위한 지연제의 사용이 권장되고 있다. 비카트 침 등 관입저항 측정 시험법의 한계를 극복하기 위해 응결시점 평가를 위한 다양한 비파괴 평가 기법이 제안되고 있지만, 지연제 사용에 따른 비파괴 평가법 사용 가능성 확보를 위해서는 여전히 실험적 연구 수행이 요구되고 있다. 본 연구에서는 타타르산 지연제를 사용하여 시멘트 페이스트의 응결 지연을 유도하고, 비카트 침 시험과 함께 전기비저항과 초음파 속도 모니터링을 수행하였다. 두 비파괴 측정 결과의 상승시점 결정을 통해 시멘트 페이스트의 응결시점을 평가하고, 비카트 침 측정을 통한 초결 및 종결 시점과의 분석으로 지연제 사용에 따른 응결 지연 현상 평가 가능성을 확인하였다. 또한 전기비저항 상승시점에 대한 X선 회절 분석을 통해 타타르산 지연제 사용에 따른 수화반응 변화를 측정하고 전기비저항 측정의 응결 지연 평가에 영향을 주는 주요 수화물을 확인하였다.

• 한국재료학회지
• /
• 제25권2호
• /
• pp.75-80
• /
• 2015

The carbon dioxide($CO_2$) released while producing building materials is substantial and has been targeted as a leading contributor to global climate change. One of the most typical method to reducing $CO_2$ for building materials is the addition of slag and fly ash, like pozzolan material, while another method is reducing $CO_2$ production by carbon negative cement development. The MgO-based cement was from the low-temperature calcination of magnesite required less energy and emitted less $CO_2$ than the manufacturing of Portland cements. It is also believed that adding reactive MgO to Portland-pozzolan cements could improve their performance and also increase their capacity to absorb atmospheric $CO_2$. In this study, the basic research for magnesia cement using $MgCO_3$ and magnesium silicate ore (serpentine) as main starting materials, as well as silica fume, fly ash and blast furnace slag for the mineral admixture, were carried out for industrial waste material recycling. In order to increase the hydration activity, $MgCl_2$ was also added. To improve hydration activity, $MgCO_3$ and serpentinite were fired at $700^{\circ}C$ and autoclave treatment was conducted. In the case of $MgCO_3$ as starting material, hydration activity was the highest at firing temperature of $700^{\circ}C$. This $MgCO_3$ was completely transferred to MgO after firing. This occurred after the hydration reaction with water MgO was transferred completely to $Mg(OH)_2$ as a hydration product. In the case of using only $MgCO_3$, the compressive strength was 3.5MPa at 28 days. The addition of silica fume enhanced compressive strength to 5.5 MPa. In the composition of $MgCO_3$-serpentine, the addition of pozzolanic materials such as silica fume increased the compression strength. In particular, the addition of $MgCl_2$ compressive strength was increased to 80 MPa.

• 한국세라믹학회지
• /
• 제40권9호
• /
• pp.859-866
• /
• 2003

칼슘설포알루미네이트계 팽창시멘트는 수화하여 ettringite, monosulfate 등의 수화물을 생성하여 경화체의 수축을 보삼함으로써, 균열 발생을 방지한다. 본 실험에서는 칼슘설포알루미네이트계 팽창시멘트의 수화특성을 규명하기 위하여 화학성법으로 3CaO.$3A1_2$$O_3$.$CaSO_4$($C_4$$A_3$S)을 제조하였으며, $C_4$$A_3$S-Ca(OH)$_2$-CaSO$_4$.2$H_2O$-C$_3$A계의 수화특성을 알아보았다. 화학성법에 의해 $1300^{\circ}C$에서 잘 발달한 $C_4$$A_3$S를 제조할 수 있었고, $C_4$A$_3$S-Ca(OH)$_2$-CaSO$_4$.2$H_{2}O$계의 주요수화 생성물은 ettringite이었으며, $C_4$A$_3$S-Ca(OH)$_2$-CaSO$_4$.$2H_2O$-C$_3$A는 수화초기에 ettringe를 생성하였다가 석고가 소비되면서 monosulfate로 전이하였다.