• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.122-129
• /
• 2019

Cracks in concrete structures are inevitable phenomena caused by shrinkage, hydration heat, and external loads. These cracks facilitate the penetration of external harmful ions into the concrete, which greatly reduces its durability. Recently, self-healing concrete has been actively studied. Also, self-healing fiber-reinforced concrete have been studied to control the crack in concrete and to maximize the shelf-healing capability. In this study, mortar specimens containing PVA fiber, fly ash and crystalline admixture were fabricated. The compressive and flexural strength were evaluated. Also, the self-healing performance was evaluated by the absorption test. From the results, it was confirmed that the amount of water absorbed by healing of the crack decreased as time increased. It was also found that PVA fiber is beneficial for the production of calcium carbonate, an additional healing product.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.276-281
• /
• 2023

Water pipes manufactured using existing Portland cement suffer from the problem of rapid deterioration and reduced durability due to the hydration product of cement being vulnerable to acids. Therefore, in this study, water pipes were manufactured using slag and fly ash, which are industrial by-products from various industries, and their characteristics were analyzed. As a result of the experiment, slump in unhardened concrete tended to increase due to the ball bearing action of fly ash, and the amount of air was reduced due to unburned coal, indicating that measures for frost resistance were needed. In addition, the initial strength of the compressive strength was increased through steam curing, and the results were equal to or better than OPC when mixing more than 50 % of slag. The acid resistance results showed that the mass reduction rate was less than 5 %, showing excellent durability performance, and the bending failure load of the water pipe also exceeded the KS standards, so it is judged to be commercializable.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.4
• /
• pp.331-339
• /
• 2023

In this study, in vitro and clinical studies were conducted to assess the anti-inflammatory effects and skin improvement effects, including moisturizing, sebum secretion-regulating, skin barrier function enhancing, and soothing of Helianthus annuus (Sunflower) seed oil. In in vitro study using cultured human epidermal keratinocytes induced with inflammation by lipopolysaccharide, significant decreases in inflammatory cytokines interleukin-6, interleukin-8, and tumor necrosis factor alpha was revealed, indicating the anti-inflammatory effects of H. annuus (Sunflower) seed oil. Additionally, the results of clinical study on subjects with sensitive skin demonstrated improved skin hydration, regulation of sebum secretion, enhanced skin barrier function, as well as amelioration of skin redness and acne, indicating positive effects on overall skin conditions after application of H. annuus (Sunflower) seed oil containing test product for 4 weeks. Results of this study demonstrated the potential of H. annuus (Sunflower) seed oil as an ingredient for cosmetic, targeting consumers with sensitive skin.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.4
• /
• pp.341-348
• /
• 2023

In this study, basic skin characteristic data was measured by measuring skin hydration, skin sebum secretion rate, skin melanin index, skin redness index, skin redness image analysis, transepidermal water loss (TEWL), and amount of stratum corneum before and after creating a temporary high temperature and low humidity environments targeting Korean women in their 20s to 50s. Stratum corneum by tape stripping was collected at each measurement and skin biomarkers including total protein content, carbonylated protein, neutral lipid, and lipid peroxidation were analyzed. Based on the results, the differences before and after creating a high temperature and low humidity environments were confirmed, the correlation between skin characteristics and skin biomarkers was confirmed, and a new skin index was created based on this. The new skin index can be used in product efficacy evaluation, and the possibility of constructing a new clinical study method and using skin biomarker discovery research through additional research was confirmed.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.1
• /
• pp.1-10
• /
• 2024

In-situ carbonation technology represents a form of mineral carbonation that integrates CO₂ into the fabrication process of cementitious construction materials, capturing CO₂ as calcium carbonate(CaCO₃) through a reaction between calcium ions(Ca²⁺) and CO₂ released during cement hydration. This investigation examines the application of in-situ carbonation technology to a variety of floor dry cement mortar formulations commonly used in local construction projects. It assesses the effects of varying the CO₂ injection flow rate and total volume of CO₂ injected. Additionally, the study evaluates the impact of reducing the quantity of cement used as a binder on the final product's quality.

• Biomolecules & Therapeutics
• /
• v.32 no.2
• /
• pp.249-260
• /
• 2024

New supplements with preventive effects against skin photodamage are receiving increasing attention. This study evaluated the anti-photoaging effects of salmon nasal cartilage proteoglycan (SPG), acting as a functional material for skin health. We administered SPG to in vitro and in vivo models exposed to ultraviolet B (UVB) radiation and assessed its moisturizing and anti-wrinkle effects on dorsal mouse skin and keratinocytes and dermal fibroblasts cell lines. These results showed that SPG restored the levels of filaggrin, involucrin, and AQP3 in the epidermis of UVB-irradiated dorsal skin and keratinocytes, thereby enhancing the keratinization process and water flow. Additionally, SPG treatment increased the levels of hyaluronan and skin ceramide, the major components of intercellular lipids in the epidermis. Furthermore, SPG treatment significantly increased the levels of collagen and procollagen type 1 by down-regulating matrix metalloproteinase 1, which play a crucial role in skin fibroblasts, in both in vitro and in vivo models. In addition, SPG strongly inhibited mitogen-activated protein kinase (MAPKs) signaling, the including extracellular signal-regulated kinase, c-Jun N-terminal kinase (JNK), and p38. These findings suggest that dietary SPG may be an attractive functional food for preventing UVB-induced photoaging. And this SPG product may provide its best benefit when treating several signs of skin photoaging.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.1
• /
• pp.6-14
• /
• 2011

The re-crystallization process for recovering granular crystalline gypsum from phospho-gypsum have proposed. The process consists of two stages; at the first stage, needle-like fine gypsum is recovered with under-product of 325 mesh wet screening after the speedy hydration of dehydrated phospho-gypsum, and at the second stage, granular crystalline gypsum is recovered with upper-product of 325 mesh wet screening after dehydration and re-crystallization of the needle-like fine gypsum in $Na_2SO_4$ solution. This paper is mainly focused on the influence of dehydration time, cooling speed of temperature and re-crystallization temperature on the recovery of granular crystalline gypsum. And the re-crystallization velocity of needle-like fine gypsum at room temperature and the variation of $Ca^{2+}$ concentration of gypsum slurry during over all re-crystallization process were also discussed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.2
• /
• pp.235-244
• /
• 2020

This study conducted a series of studies to offer a novel method of using CBS-dust that produced as by-product in the manufacture of cement. Four different contents of BS and CBS-dust were adopted for test parameters of this study. Mortar with 50% of W/B was fabricated. First, in the case of the fresh mortar, the flow decreased as the CBS-dust replacement rate increased, but the binder composition ratio BS 45% and 65% showed higher fl ow than Pl ain when repl acing CBS-dust 5%. In the case of air content, overall, the tendency was proportional to the CBS-dust replacement rate, and chloride tended to exceed the reference value at all replacement rates except for the CBS-dust 0% replacement. The compressive strength of the hardened mortar shows the resul t that the strength is improved when the CBS-dust is repl aced by 5% to 10%, and the CSH gel and structure formation is confirmed by microstructure analysis through the hydration reaction when the CBS-dust is replaced. Therefore, for a given condition CBS-dust is used as a early-strength admixture in a concrete secondary product that uses a large amount of admixture without reinforcing bars it can be an effective method for enhancing the strength of concrete as an alkali activator.

• Journal of Life Science
• /
• v.33 no.11
• /
• pp.905-914
• /
• 2023

To evaluate the effectiveness of the skin barrier improvement of lactic acid (LA) and gluconolactone (GL), the expression of filaggrin, loricrin, hyaluronic acid (HA), hyaluronan syhthase-2 (HAS2), and aquaporine-3 (AQP3) in keratinocytes, and the moisture content and transepidermal water loss (TEWL) by clinical trials were evaluated. The expression levels of filaggrin and locricrin, which are the main factors affecting the proper functioning of skin barrier function, and HA, HAS2, and AQP3, which are skin moisturizing-related proteins measured by quantitative real-time polymerase chain reaction (qRT-PCR) and western blotting. The results showed that the expression levels of the factors that decreased by H2O2 treatment were significantly increased by LA, GL, and a mixture of LA and GL at the mRNA and protein levels (p<0.05). The nanoemulsion containing a mixture of LA and GL was prepared using the emulsion inversion method, and the average particle size was 299.9 ± 0.287 nm. After measuring the TEWL of nanoemulsion using Vapometer, it was found that TEWL significantly decreased by 15.53% and 26.73% after two weeks and four weeks of product use, respectively, compared to TEWL before product use (p<0.001). Similarly, the skin moisture content of the nanoemulsion significantly increased by 15.40% and 26.59% after two weeks and four weeks of product use, respectively, compared to skin moisture content before product use (p<0.001). Therefore, the skin barrier function and moisturizing effect of a mixture of LA and GL are shown by increasing the moisture content and decreasing the TEWL by increasing the expression of filaggrin, loricrin, HA, HAS2, and AQP3. This suggests the possibility for the development of functional cosmetic ingredients in the future.

• Korean journal of food and cookery science
• /
• v.12 no.4
• /
• pp.527-534
• /
• 1996

enistein (G), and daidzein (D), the major isoflavones, were analyzed in 14 varieties of Korean soybean and various processed soybean products by using high performance liquid chromatography. Isoflavone contents (G+D) were greatly variable among varieties ranged from 308.2 $\mu\textrm{g}$/g to 1,134.2 $\mu\textrm{g}$/g and highest in Danyopkong and Jinpumkong. Among hypocotyl, cotyledon and hull of soybean the concentration of the isoflavone (G+D) in the hypocotyl was highest ranged from 2,971.7 $\mu\textrm{g}$/g to 5,704.9 $\mu\textrm{g}$/g. The distributions of genistein and daidzein were also different in hypocotyl, cotyledon and hull. Higher ratio of daidzein to genistein (D/G) was found in the hypocotyl (4-12) compared to cotyledon and hull (0.1-4). Isoflavone (G+D) contents of soymilks (Sinpaldal#2, Eunhakong) prepared at 16 hour hydration were decreased to 1.1-1.2 times compared with that at 8 hour hydration. Commercial soymilks contained much lower isoflavone (G+D) than laboratory soymilks. Soybean curd (Eunhakong) prepared with MgCl$_2$ showed higher isoflavone (G+D) contents than that with CaSO$_4$. But these values of two different soybean curds made at laboratory were similar to those of 3 commercial curds. The concentration of the isoflavones in soybean sprout separated with 3 parts revealed highest in the head and lowest in the stem. Compared with non-fermented soybean foods the fermented soybean produfts, Kochujang and soybean paste, Duen Jang, showed very low contents of isoflavone (G+D),2.8-3.0 $\mu\textrm{g}$/ｇ, 35.9-63.6 $\mu\textrm{g}$/ｇrespectively.