• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.45-48
• /
• 2003

In general, speech coding methods are classified into the following three categories: the waveform coding, the source coding and the hybrid coding. Fast speaking is possible to encode with a few information compared with slow speaking rate. In case of speaking rate, low frequency band is more important than high frequency band while listening. Speech vocoding technique is developing to way with low bit rate and complexity and high sound quality. the CELP type of vocoder support very good sound quality with low bit rate but these vocoders don't consider about the speaking rate. When we consider speaking rate and encode the frame depending on the speaking rate, the bit rate is able to reduce the bit rate than the conventional vocoder. We propose the technique to estimate the speaking rate and applied PSOLA technique in case of the frame of slow speaking rate. As a result of simulation bit rate can be reduced about 300 bps.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.659-662
• /
• 2005

In this paper, we proposed the novel hybrid multi-level inverter using combination of the output voltage of transformers to reduce the THD(Total Harmonic Distortion) and improve the waveform of output voltage. The proposed multi-level inverter used the output of transformer which is 1times, 2times, 4times of input of the transformers. So we increased the output voltage from the reduce the number of switching component and transformer. Also, we tested the proposed prototype 15-level inverter to clarify the proposed electric circuit and reasonableness of control signal for the proposed multi -level PWM inverter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1199-1201
• /
• 2000

This paper proposes a harmonics reducing circuit for fluorescent lamp inverters using hybrid type smoothing circuit with pumping and smoothing capacitors. A waveform of full-wave rectification used as a direct current power supply at fluorescent lamp inverters contains a lot of harmonic wave from inrush current which is generated near the maximum of input voltage with purse shape when voltage smoothing capacitor is charged. Therefore, in order to suppress inrush current which will result in harmonic wave. this paper proposes a method to control abrupt charging current by use of charging voltage at pumping capacitor. The suppression of harmonics generation at lamp current is confirmed through simulations.

• 한국정보통신학회논문지
• /
• 제24권5호
• /
• pp.646-654
• /
• 2020

이 논문은 강수의 공간분포를 측정할 수 있는 전자파 기반 센서를 개발하는 것이며, 악천후 관측의 핵심인 강우, 강설, 바람장을 동시 측정할 수 있는 전파강수계(EWRG, Electromagnetic Wave Rain Gauge)에 관한 것이다. 본 연구를 통해 LFM 방식의 송수신 신호를 이론적으로 분석하였다. 또한 전파강수계 송수신기를 개발하기 위해서 LFM 송수신기 설계 및 모의실험을 수행하였다. 본 논문은 소형 HMIC(Hybrid Microwave Integrated Circuit)를 사용하여 K-BAND 펄스 구동 형 6W SSPA(Solid State Power Amplifiers) 송수신기 개발을 하였다. 65도의 고온의 환경에서 1%의 짧은 Duty를 가지는 6W 이상의 출력파워, 5dB이하의 수신 NF(Noise Figure)를 가지고 있다. 제작된 모듈은 파형발생부가 내장되어 LFM과 Square Pulse파형을 방출하며 수신부는 40dB이상의 수신 이득을 가진다. 이 논문에서 개발된 송수신기는 다른 소형 기상 레이더에 적용할 수 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.69-71
• /
• 2007

Need correct analysis of thrust for control performance improvement of HB-LPM (Hybrid type Linear Pulse Motor). It is difficult to analyze HB-LPM's thrust. In this paper, HB-LPM's thrust is expressed to mathematical expression. And it is proved validity of this numerical formula by thrust measurement system. Two phase driver is composed. It is verified validity of numerical formula that measure waveform of electric current and voltage that is supplied in each phase. In this study, composed two phase drive driver, advantage of this IGBT element 6 by accumulated IPM module 1 Driver composition possible. That is, can economize 1 moule. In other words, Driver composition is available by IGBT or metal oxide semiconductor field effect transistor element 4. This is economical big gain.

• Journal of Power Electronics
• /
• 제13권1호
• /
• pp.59-69
• /
• 2013

An alternative technique to control multilevel inverters with vector approximations has been presented. The innovative control method utilizes specially designed two-dimensional hysteresis comparators to simplify the implementation and improve the resultant waveform. The multistage inverter designed with maximum number of levels is operated in such a way to approximate the reference voltage vector by exploiting the large number of multilevel inverter vectors. A three-stage inverter with the main high voltage stage made of three phase, six-switch and singly-fed inverter is considered for application to the proposed design. The proposed control concept is to maintain a higher voltage stage state as long as it can lead to a target vector. High and medium voltage stages controllers are based on surface hysteresis comparators to hold the switching state or to perform the necessary change to achieve its reference voltage with minimal switching losses. The low voltage stage controller is designed to approximate the target reference voltage to the nearest inverter vector using the nearest integer rounding and adjustment comparators. Model simulation and prototype test results show that the proposed control technique clearly outperforms the previous control methods.

• 한국자동차공학회논문집
• /
• 제23권3호
• /
• pp.271-278
• /
• 2015

This paper develops an OBD Diagnostic Program (Program) using Visual Studio (C#), which was used to diagnosis malfunction information from OBD-II system vehicles. We accomplished this using the Program, Diagnostic tests, Board (STN1110), FTDI Basic Cable, Mini USB Cable, OBD Data Cable, and both hybrid and regular vehicles. The Program tests real-time data output, DTC output, sensor value output, engine RPM, waveform data, OBD type check, PID inspection, and whole monitoring. We found vehicles used in this research had 19 PIDs, which was within OBD-II regulations. We also gathered data on control and diagnostic code regulated by OBD-II system, such as, sensor output value, engine RPM, DTC output, each PID analytic value, OBD type, fuel mode, and whole monitoring result value. Using the data collected through the Program appropriately can lead to more effective diagnostic practices and contribute to education.

• 한국컴퓨터정보학회논문지
• /
• 제17권12호
• /
• pp.31-39
• /
• 2012

본 논문에서는 수용가의 에너지 절감과 최대수요전력 제어를 위하여 마이크로프로세서를 이용한 자동 전압 조정기(AVR)를 제안한다. 제안한 자동 전압 조정기(HS-AVR : Hybrid Switching Automatic Voltage Regulator)는 토로이달 코어에 1개의 직렬 권선과 분리된 4개의 분로 권선으로 구성되어 있는 단권변압기를 사용한다. 변압기의 전압 조정은 직렬 권선과 분로 권선의 연결 방법에 따라 감압/승압이 가능하다. 스위치는 릴레이와 트라이악을 병행하여 사용한다. 스위치의 조작 시 발생하는 권선의 여자돌입전류를 제어하기 위하여 트라이악을 이용하여 연결 상태를 변경하고, 연결 상태 유지 시에는 릴레이를 이용함으로써 스위치 소비 전력을 최소화 한다. 제어 신호는 여자 돌입 전류를 줄이기 위하여 전압 파형에 동기화 하여 제어되며 이를 위하여 소프트웨어 PLL을 사용한다. 소프트웨어 PLL은 전압 파형의 제로크로스, 전압 최고점 등의 동기화에 사용함으로써 스위치와 시스템을 최소화한다. 기존 전압 조절 스위치나 자동 전압 조정기 구조는 여자 돌입 전류로 인한 스위치 접점 손상을 막기 위하여 최대전류를 수용할 수있는 용량으로 구성함으로써 장치 크기가 매우 커지는 문제점이 있었다. 본 논문은 이런 문제를 해결하여 자동 전압 조정기의 크기를 줄이고 효율을 높이는 방법을 제안하였다.

• 대한전자공학회논문지
• /
• 제21권3호
• /
• pp.73-83
• /
• 1984

본 논문에서는 embedded ADPCM, embedded ABM 및 delayed decision 방식을 사용한 system이 실제 음성을 부호화할 때 그 성능을 연구하였다. Embedded ADPCM과 ADM 부호화기는 종래의 ADPCM과 ADM 부호화기를 개조함으로써 얻어졌다. Embedded ADPCM 부호화기는 기본적으로 Cummiskey에 의해 최초로 제안된 바 있는 ADPCM을 기초로 하고 있다. Embedded ADM system은 CVSD와 HCDM system을 개조하여 만들었다. 이들 embedded 부호화기 중에서 embedded HCDM의 성능이 다른 부호화기에 비하여 16kbits/s에서 64kbits/s의 넓은 범위의 전송률에 걸쳐 우수하다. Embedded ADPCM에 delayed decision 방식을 적용하면 모든 전송률에서 성능이 크게 향상된다. 그러나 16kHz로 sample되는 embedded ADM system에 있어서는 같은 수의 지연 sample을 가진 embedded ADPCM에서 만큼 크게 성능이 향상되지는 않음을 알아내었다.

• 한국분말재료학회지
• /
• 제22권3호
• /
• pp.163-168
• /
• 2015

Ti alloys are extensively used in high-technology application because of their strength, oxidation resistance at high temperature. However, Ti alloys tend to be classified very difficult to cut material. In this paper, The powder synthesis, spark plasma sintering (SPS), bulk material properties such as electrical conductivity and thermal conductivity are systematically examined on $Ti_2AlN$ and $Ti_2AlC$ materials having most light-weight and oxidation resistance among the MAX phases. The bulk samples mainly consisted of $Ti_2AlN$ and $Ti_2AlC$ materials with density close to theoretical value were synthesized by a SPS method. Machining characteristics such as machining time, surface quality are analyzed with measurement of voltage and current waveform according to machining condition of micro-electrical discharge machining with micro-channel shape.