• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.283-291
• /
• 2015

In this paper, a negative impedance converter, the key element of non-Foster matching to enhance the bandwidth of matching high Q-factor passive element, is presented. Proposed negative impedance converter is implemented by the topology of Linvill's transistor negative impedance converter circuit. It is hard to forecast the operation of negative impedance circuit, because it is composed of gain element and positive feedback. Therefore the negative impedance circuit is implemented by hybrid type beforehand to check out the feasibility and it is designed by integrated circuit. The integrated circuit is fabricated by commercial $0.18{\mu}m$ SiGe BiCMOS process, and non-Foster matching is observed at 700~960 MHz band by cancelling the target reactance.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.1 s.307
• /
• pp.31-38
• /
• 2006

In this paper, we consider one-step-ahead control of waveform parameters (pulse amplitudes and lengths, and FM sweep rate) as well as detection thresholds for optimal range and range-rate tracking in clutter. The optimal control of the combined parameter set minimizes a tracking performance index under a set of parameter constraints. The performance index includes the probability of track loss and a function of estimation error covariances. The track loss probability and the error covariance are predicted using a hybrid conditional average algorithm The effect of the false alarms and clutter interference is taken into account in the prediction. Tracking performance of the one-step-ahead control is presented for several examples and compared with a control strategy heuristically derived from a finite horizon optimization.

• Convergence Security Journal
• /
• v.12 no.4
• /
• pp.3-8
• /
• 2012

Smartphones have all the recent technology integration and NFC (Near Field Communication) Technology is one of them and become an essential these days. Despite using smartphones with NFC technology widely, not many security vulnerabilities have been discovered. This paper attempts to identify characteristics and various services in NFC technology, and to present a wide range of security vulnerabilities, prevention, and policies especially in NFC Contactless technology. We describe a security vulnerability and an possible threat based on human vulnerability and traditional malware distribution technic using Peer-to-Peer network on NFC-Enabled smartphones. The vulnerability is as follows: An attacker creates a NFC tag for distributing his or her malicious code to unspecified individuals and apply to hidden spot near by NFC reader in public transport like subway system. The tag will direct smartphone users to a certain website and automatically downloads malicious codes into their smartphones. The infected devices actually help to spread malicious code using P2P mode and finally as traditional DDoS attack, a certain target will be attacked by them at scheduled time.

• Spatial Information Research
• /
• v.17 no.2
• /
• pp.171-181
• /
• 2009

In Web2.0 environment, with advanced platform technologies, global vendors such as Google, Microsoft and Yahoo provide competitive geospatial services based on global map and satellite image. But the relatively low level of platform technologies has not rapidly increased the land information and geospatial service markets in Korea. For the ubiquitous next generation Internet, as a one of the R&D projects by Korean Land Spatialization Group, the project for platform technologies has being made to provide customized land information and geospatial service. The platform technologies can be categorized for streamming, mashup and geosearch. More specifically, the 2D/3D Hybird streamming engine, mashup engine for u-GIS service and next generation search engine for land information have being developed. In this context, the strategies for efficient development and use of geoweb platform technologies are required. This study surveys the present geospatial products and services using of platform technologies to propose the strategies for efficient development and use of platform technologies. The strategies for efficient development and use of platform technologies can be proposed focusing on target market and each of platform technologies.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.57.2-57.2
• /
• 2018

We present the preliminary result from our KVN single-dish observations of the MALATANG sample. The MALATANG (Mapping the dense molecular gas in the strongest star-forming Galaxies) is one of the JCMT legacy surveys on the nearest 23 IR-brightest galaxies beyond the Local Group. The goal of the MALATANG survey is to map the sample in the dense gas tracers (HCN and HCO+J=4-3), and probe the relationships between the dense molecular gas and star formation activities. As a complementary study, we recently launched a KVN/KaVA program on the same sample, in order to measure their flux densities and parsec-scale jet/outflows in the millimeter regime, which will be greatly useful in understanding the initial conditions of the feedback process. In this work, we present the preliminary result from our pilot KVN single-dish program on a sub-sample, which will be used to select the future VLBI imaging study under plan. We investigate the KVN spectral energy distributions (SED) of the sample as a function of the power source of the luminous IR brightness of each target (starburst? AGN? or hybrid?). We also discuss the technical challenges that we experienced during our KVN observations due to the large size of the sample in the sky.

• Earthquakes and Structures
• /
• v.18 no.1
• /
• pp.27-44
• /
• 2020

This work presents a comparison of three performance-based seismic design methods (PBSD) as applied to plane steel frames having eccentric braces (EBFs) and buckling restrained braces (BRBFs). The first method uses equivalent modal damping ratios (ξ_k), referring to an equivalent multi-degree-of-freedom (MDOF) linear system, which retains the mass, the elastic stiffness and responds in the same way as the original non-linear MDOF system. The second method employs modal strength reduction factors (${\bar{q}}_k$) resulting from the corresponding modal damping ratios. Contrary to the behavior factors of code based design methods, both ξ_k and ${\bar{q}}_k$ account for the first few modes of significance and incorporate target deformation metrics like inter-storey drift ratio (IDR) and local ductility as well as structural characteristics like structural natural period, and soil types. Explicit empirical expressions of ξ_k and ${\bar{q}}_k$, recently presented by the present authors elsewhere, are also provided here for reasons of completeness and easy reference. The third method, developed here by the authors, is based on a hybrid force/displacement (HFD) seismic design scheme, since it combines the force-base design (FBD) method with the displacement-based design (DBD) method. According to this method, seismic design is accomplished by using a behavior factor (q_h), empirically expressed in terms of the global ductility of the frame, which takes into account both non-structural and structural deformation metrics. These expressions for q_h are obtained through extensive parametric studies involving non-linear dynamic analysis (NLDA) of 98 frames, subjected to 100 far-fault ground motions that correspond to four soil types of Eurocode 8. Furthermore, these factors can be used in conjunction with an elastic acceleration design spectrum for seismic design purposes. Finally, a comparison among the above three seismic design methods and the Eurocode 8 method is conducted with the aid of non-linear dynamic analyses via representative numerical examples, involving plane steel EBFs and BRBFs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.1
• /
• pp.115-126
• /
• 1996

In the time optimal control problem, bang-bang control has been used becaese it is the theoretical time minimum solution. However, to improve tracking speed performance in the time optimal control, it is important to select a switching point accurately which makes the velocity zero near the target track. But it is not easy to select the swiching point accurately because of the damping coefficient variation and uncertainties of modeling an actual system. The Adaptive model following control(AMFC) is implemented to relieve the difficulty and inconvenience of this task. The AMFC and make the controlled plant follow as closely as possible to a desired reference model whose switching point can be calculated easily and accurately, assuring the error between the states of the reference model and those of the controlled plant appoaches zero. The hybrid control method composed of AMFC and PID is applied to a tracking actuator of the magneto optical disk drive(MODD) in random access devices to improve its slow tracking performance. According to the simulaion and experimental results, the average tracking time as small as 20ms is obtained for a 3.5 magneto-optical disk drive. The AMFC also can be applied for other random access devices to improve the average tracking performance.

• Transactions of Materials Processing
• /
• v.29 no.4
• /
• pp.194-202
• /
• 2020

In this paper, experimental and numerical study on a combined sheet metal forming and plate forging of a seal part of a passenger car's hub bearing is conducted to develop the new process of which target is to remove machining process by plate forging and to achieve near-net shape manufacturing. The previous process of a sheet metal forming inevitably needed a machining process for making stepped sheet after conventional sheet metal forming in a progressive way. The stepped sheet is intended to be formed by plate forging in this study. Through the systematic way of developing the combined forming process using solid elements based-elastoplastic finite element method (FEM), several conceptual designs are made and an optimized process design in terms of geometric dimensioning and tolerance of straightness of the thin part is found, which is exposed to bending in metal forming of axisymmetric part. The predicted straightness measured by the slope angle of the tilted thin region is compared with the experimental straightness, showing that they are in a good agreement with each other. Through this study, a systematic approach to optimal process design, based on elastoplastic FEM with solid elements, is established, which will contribute to innovating the conventional small-scaled sheet metal forming processes which can be dealt with by solid elements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.5
• /
• pp.458-465
• /
• 2011

UAV-UGV teaming concept has been proposed that can compensate for weak points of each platform by providing carrying, launching, recovery and recharging capability for the VTOL-UAV through the host UGV. The teaming concept can expand the observation envelop of the UGV and extend the operational capability of the UAV through mechanical combination of each system. The spherical-shaped coaxial rotorcraft UAV is suggested to provide flexible and precise interface between two systems. Hybrid navigation solution that included vision-based target tracking method for precision landing is investigated and its experimental study is performed. Feasibility study on length-variable rotor to provide the compact configuration of the loaded rotorcraft platform is also described.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.4-4
• /
• 2012

Proteins enable biology to be viable through molecular interactions (such as in antigen-antibody, ligand-receptor, and drug-target) with