• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.838-846
• /
• 2006

The purpose of this study to develop the air-conditioning system that adopts adaptive model as an indoor climate control logic for energy saving. The adaptive model using the ability of human thermal adaptation could be expected to alleviate the indoor set-point temperature compared with the past heat-balance model. Especially, in case of hybrid air-conditioning system coupled with natural ventilation and heating/cooling system, the adaptive model can be describe the thermal comfort of inhabitant who stay at hybrid system controlled buildings with accuracy. In this paper, the concept of adaptive model will be described and the results of a continuous measurement on the actual thermal experiences and behaviors of thermal adaptation for office worker will be reported.

• 한국해양공학회지
• /
• 제19권6호통권67호
• /
• pp.78-85
• /
• 2005

Initial alignment and localization are important topics in inertial navigation systems, since misalignment and initial position error wholly propagate into the navigation systems and deteriorate the performance of the systems. This paper presents the error convergence characteristics of the hybrid navigation system for underwater vehicles initial position, which is based on an inertial measurement unit (IMU) accompanying a range sensor. This paper demonstrates the improvement on the navigational performance oj the hybrid system with the range information, especially focused on the convergence of the estimation of underwater vehicles initial position error. Simulations are performed with experimental data obtained from a rotating ann test with a fish model. The convergence speed and condition of the initial error removal for random initial position errors are examined with Monte Carlo simulation. In addition, numerical simulation is conducted with an AUV model in lawn-mowing survey mode to illustrate the error convergence of the hybrid navigation System for initial position error.

• Wind and Structures
• /
• 제18권5호
• /
• pp.549-566
• /
• 2014

In spite of progress in the numerical simulation of typhoon wind field in atmospheric boundary layer (ABL), using typhoon wind field model in conjunction with Monte Carlo simulation method can only accurately evaluate typhoon wind field over a general terrain. This method is not enough for a reliable evaluation of typhoon wind field over the actual complex terrain with surface roughness and topography variations. To predict typhoon wind field over the actual complex terrain in ABL, a hybrid numerical simulation method combined typhoon simulation used the typhoon wind field model proposed by Meng et al. (1995) and CFD simulation in which the Reynolds averaged Navier-Stokes (RANS) equations and k-${\varepsilon}$ turbulence model are used. Typhoon wind filed during typhoon Dujuan and Imbudo are simulated using the hybrid numerical simulation method, and compared with the results predicted by the typhoon wind field model and the wind field measurement data collected by Fugro Geotechnical Services (FGS) in Hong Kong at the bridge site from the field monitoring system of wind turbulence parameters (FMS-WTP) to validate the feasibility and accuracy of the hybrid numerical simulation method. The comparison demonstrates that the hybrid numerical simulation method gives more accurate prediction to typhoon wind speed and direction, because the effect of topography is taken into account in the hybrid numerical simulation method.

• 한국지열·수열에너지학회논문집
• /
• 제12권1호
• /
• pp.7-16
• /
• 2016

This paper presents the measurement and analysis results for the cooling performance of ground-coupled heat pump (GCHP) system using a cooling tower as a supplemental heat rejector. In order to demonstrate the performance of the hybrid approach, we installed the monitoring equipments including sensors for measuring temperature and power consumption, and measured operation parameters from May 1 to October 30, 2014. The results showed that the entering source temperature of brine returning from the ground heat exchanger was in a range of design target temperature. Leaving load temperatures to building showed an average value of $11.4^{\circ}C$ for cooling season. From the analysis, the daily performance factor (PF) of geothermal heat pumps ranged from 4.4 to 5.2, while the daily PF of hybrid GCHP system varied from 3.0 to 4.0 over the entire cooling season.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권7호
• /
• pp.799-806
• /
• 2013

As a first step to develop the hybrid power generation system, on this study, the time-variable resources of wind and solar radiation of Yeongdo, Busan, Korea had been measured during June and July 2013. And the quantity of generated wind power and solar photovoltaic had also been measured during the same period. It is found out that the wind mainly flew from southwest at the average speed of 2 m/s during 2 months. And it is clear that, because of the low wind velocity, the wind quality to generate the power seems not enough at this area. Meanwhile solar radiation was measured every daytime (6:00~19:00) and the peak solar radiation occurred around 12:00~14:00. And it is clear that the time-based variations of quantity of generated power were proportional to the variations of these resources, respectively. As a proposal, these 2 natural energies can be combined as resources of a hybrid system, because these 2 patterns are not overlapped so much on time base.

• 한국정보통신학회논문지
• /
• 제10권10호
• /
• pp.1779-1785
• /
• 2006

본 논문은 근전도 패턴 인식에 의한 가상 로봇팔 제어 방식을 제안한다. 고차원의 근전도 신호를 정밀하게 분류하기 위하여 혼합형 신경 회로망 방식을 사용한다. 혼합형 신경회로망은 SOFM과 LVQ로 구성되고, 고차원의 EMG 신호를 2차원 데이터로 변환한다. 3개의 표면 전극을 이용하여 EMG 신호를 측정 한다. 제안한 혼합 시스템을 이용하여 한글 자음 6개의 수화 신호를 분류한다. 가상 로봇팔 실험을 통해서 제안한 혼합 시스템을 이용한 수신호의 EMG 패턴 인식의 유용성을 확인하였다.

• 한국지열·수열에너지학회논문집
• /
• 제8권1호
• /
• pp.7-12
• /
• 2012

This study proposes a hybrid geothermal system combined with heating mode and snow-melting mode for winter season in order to increase the annual operating efficiency of the GSHP(Ground Source Heat Pump). The purpose of this study is to get effectiveness of the hybrid geothermal system by the site experiments. In case of snow-melting only mode, the GSHP COP is 0.7 higher than system COP in average. And in case of hybrid mode, heating GSHP COP is 0.5 higher than snow-melting GSHP COP. And it is also found out that all COP obtained through measurement periods is higher than nominal COPs given by GSHP manufacturer. As a conclusion, it is clear that the proposed hybrid geothermal system is expected as a highly efficient system.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권2호
• /
• pp.33-40
• /
• 2020

광섬유를 이용한 구조물 건전도 모니터링은 다양한 연구가 이루어졌다. 광섬유는 다중 및 분포로 변형률을 계측 할 수 있다. 광섬유 센서 중, FBG 센서는 동적 응답 계측과 정밀도가 높은 장점이 있지만, 계측 포인트의 제한이 있다. 분포형 광섬유 센서는 계측 포인트가 1000개가 넘지만, 샘플링 속도가 낮아 동적 계측이 불가능하다. 본 연구에서는 FBG와 브릴루안 상관영역 측정법의 장점만을 이용한 하이브리드 신경망 센서 계측 시스템이 제안하였다. 광섬유 브래그 격자를 포함한 광섬유를 이용하여 정적응답과 동적 응답을 선택적으로 계측 할 수 있는 계측 시스템이다. 제안된 시스템검증을 위하여 실내 실험을 수행하였으며, 기존의 센서와의 비교를 통해 정확도와 재현성을 검증하였다. 제안된 시스템을 활용하여, 동적 응답을 상시 계측하고, 전역적인 구조물의 상태를 평가한다. 이상 상태가 감지 되면, 분포형 계측 시스템을 이용하여 정적 응답을 계측하여, 구조물의 국부적인 상태를 평가한다. 제안된 시스템을 통해 효율적인 구조물 건전도 모니터링에 활용될 수 있을 것으로 판단된다.

• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.9-16
• /
• 2009

In this paper, the coaxial monitoring system to capture image of weld pool was developed in laser-arc hybrid welding. In order to obtain the reliable image, green laser was used as a illumination system and measuring components such as band pass filter, ND (Neutral Density) filter and shutter speed was designed and optimized. Using this monitoring system, weld pool images were captured according to laser power, welding speed, welding current and interspace between laser and arc through the experiment. ANOVA (Analysis of Variation) was carried out to identify the influence of process variables on bead widths extracted from captured images of monitoring system. Welding speed and current were major factor to affect weld pool.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2008년도 춘계학술발표대회 개요집
• /
• pp.48-48
• /
• 2008