• International Journal of Automotive Technology
• /
• 제7권6호
• /
• pp.729-739
• /
• 2006

This paper describes an active fault-tolerant control system for an induction motor drive that propels an Electrical Vehicle(EV) or a Hybrid one(HEV). The proposed system adaptively reorganizes itself in the event of sensor loss or sensor recovery to sustain the best control performance given the complement of remaining sensors. Moreover, the developed system takes into account the controller transition smoothness in terms of speed and torque transients. In this paper which is the sequel of (Diallo et al., 2004), we propose to introduce more advanced and intelligent control techniques to improve the global performance of the fault-tolerant drive for automotive applications(e.g. EVs or HEVs). In fact, two control techniques are chosen to illustrate the consistency of the proposed approach: sliding mode for encoder-based control; and fuzzy logics for sensorless control. Moreover, the system control reorganization is now managed by a fuzzy decision system to improve the transitions smoothness. Simulations tests, in terms of speed and torque responses, have been carried out on a 4-kW induction motor drive to evaluate the consistency and the performance of the proposed fault-tolerant control approach.

• 전력전자학회논문지
• /
• 제4권3호
• /
• pp.285-293
• /
• 1999

본 논문에서는 인버터를 사용하여 진행파형 초음파 모터를 구동할 때에 구동 주파수, 위상차 및 상간의 전압을 제어하기 위해 새로운 방식의 초음파 모터 구동용 디지털 제어기를 제안하였다. 제안된 디지털 제어기는 주파수 발생과 위상차 제어를 하기 위하여 기존의 제어기에서 사용한 디지털-아날로그 혼합 방식이 아닌 디지털 논리에 의하여 출력이 발생되며 이로 인하여 제어기의 구성이 대폭 단순해진 특징을 갖는다. 제안된 디지털 제어기는 두 가지 형태로 주파수와 위상만을 제어하기 위한 경우와 상간의 전압까지 제어하기 위한 경우로 분리하였다. 실험에서는 상용 LSI와 EPLD를 사용하여 구현된 단순화된 디지털 제어기의 성능을 평가하였다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권1호
• /
• pp.1-10
• /
• 2010

최근 낸드 플래시 메모리가 하드디스크 수준으로 읽기 성능이 향상되고, 전력소비가 훨씬 적음에 따라, 플래시메모리와 하드디스크를 같이 사용하는 하이브리드 하드디스크와 같은 이기종 저장장치들이 출시되고 있다. 하지만 낸드 플래시 메모리의 쓰기 및 삭제 속도가 기존 자기디스크의 쓰기 성능에 비해 매우 느릴 뿐 아니라, 사용자 층에서 쓰기 요청이 집중될 경우 CPU, 메인 메모리에 심각한 오버헤드를 발생시킨다. 본 논문에서는 비휘발성 캐시의 역할을 하는 낸드 플래시 메모리의 성능을 향상시키기 위해 읽기의 참조 빈도는 낮고, 쓰기의 갱신 빈도가 높은 데이터 블록들을 교체하는 LFU(Least Frequently Used)-Hot 기법을 제시하고, 교체 될 데이터 블록들을 재배치하여 자기디스크로 플러싱하는 기법을 제시한다. 실험 결과, 본 논문에서 제안하는 LFU-Hot 블록 교체 기법과 멀티존 기반의 데이터 블록 재배치기법 실행시간이 기존 LRU, LFU 블록 교체 기법들보다 입출력 성능 면에서 최대 38% 빠르고, 비휘발성 캐시의 수명을 약 40% 이상 향상 시킴을 증명하였다.

• 한국군사과학기술학회지
• /
• 제17권6호
• /
• pp.868-876
• /
• 2014

Arleigh Burke(DDG-51) and Sejong warship are AEGIS destroyer of US Navy and Korea Navy. These are designed to make more than 30knots by applying a COGAG(COmbined Gas turbine And Gas turbine) system. However, the gas turbine(LM2500) in this system has a low SFC (Specific Fuel Consumption) when the warship operated low speed. So, many kinds of companies are researching the HED(Hybrid Electric Drive) system to improve this problem. The purpose of this paper is to analyze the HED system and simulate by Sejong warship data. Serveral methods were used for that purpose. More specifically, the equipment modeling are employed for regression analysis by LabVIEW. As a result, it was found that the warship installed HED system could cut their fuel bills by as much as about 80,000,000won per year.

• International Journal of Automotive Technology
• /
• 제4권1호
• /
• pp.47-55
• /
• 2003

The Center for Transportation Research at the Argonne National Laboratory (ANL) supports the DOE by evaluating advanced automotive technologies in a systems context. ha has developed a unique set of compatible simulation tools and test equipment to perform an integrated systems analysis project from modeling through hardware testing and validation. This project utilized these capabilities to demonstrate the trade-off in fuel economy and Oxides of Nitrogen (NOx) emissions in a so-called ‘pre-transmission’ parallel hybrid powertrain. The powertrain configuration (in simulation and on the dynamometer) consists of a Compression Ignition Direct Ignition (CIDI) engine, a Continuously Variable Transmission (CVT) and an electric drive motor coupled to the CVT input shaft. The trade-off is studied in a simulated environment using PSAT with different controllers (fuzzy logic and rule based) and engine models (neural network and steady state models developed from ANL data).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2255-2260
• /
• 2007

This Paper focuses on modeling and simulation to analyze the characteristic of hybrid vehicle. The system includes proton exchange membrane fuel cell(PEMFC), photovoltaic generator(PV), lead-acid battery, motor, vehicle and controller. Main electricity is produced by the PEMFC and battery to meet the requirements of a user load. When vehicle is parked in a sunny place, extra power is generated by the photovotaics and is charged in a battery for next drive. Further we evaluate usefulness of this hybrid vehicle by using ADVISOR - the advanced vehicle simulator written in the Matlab/Simulink environment. According to simulation results, the extra power obtained by photovoltaics which have been explored in nature conditions can help to reduce the electrical load of PEMFC and increase the efficiency (over 30%).

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.198-206
• /
• 2017

This paper presents a novel scheme to estimate the rotor position of a single-phase hybrid switched reluctance motor (HSRM). The back-EMF generated by the permanent magnet (PM) field whose performance is motor parameter independent is adopted as an index to achieve the sensorless control. The differential value of back-EMF is calculated by hardware and processed by DSP to capture a fixed rotor position four times for every mechanical cycle. In addition, to accomplish the normal starting of HSRM, the determination method of the turn-off time position at the first electrical cycle is also proposed. In this way, a sensorless operation scheme with adjustable turn on/off angle can be achieved without substantial computation. The experimental verification using a prototype drive system is provided to demonstrate the viability of the proposed position estimation scheme.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.788-793
• /
• 2002

Hybrid type slim tilt actuator and 6-wire supported are developed for DVD recording in the optical disc drive of notebook PC, which can compensate the inclination of disc and objective lens. The hybrid actuator uses the actuating method of moving coil in the focus and track direction and that of moving magnet in the tilt direction. Comparing with 6-wire supported actuator and hybrid type actuator, we can choose an actuator for slim super combo pickup. Two actuator are designed through the modal analysis and magnetic field analysis and experimental results shows dynamic characteristics. Finally, it is verified that the actuator can compensate the disc tilt of ${\pm}0.4^{\circ}$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1275-1277
• /
• 2001

Growing environmental and economic concerns have lead to recent efforts to produce more fuel efficient and lower emissions vehicles. Hybrid Electric Vehicles(ab. HEVs) are the most promising designs to reach these goals. In this paper, We present an of a Power Tra the Hybrid Electric Vehicle(at. PTHEV). We int a different concept of PTHEV than in the pr research of PTHEV. This PTHEV includes benefits of serial(Minimum emission and Max efficiency) and parallel(Maximum Power efficiency by direct drive engine) PTHEV. Also mechanism can avoid driving the engine in the speed regions.

• 전력전자학회논문지
• /
• 제18권2호
• /
• pp.192-198
• /
• 2013

The rapidly growing demand for electric power systems in electric vehicles (EVs) and hybrid electric vehicles (HEVs) require simpler, cost-effective, and higher performance components. In this paper, a novel power conversion system for hybrid electric vehicles is proposed for these needs. The proposed power conversion system reduces the conversion system cost while preserving same functionality. The proposed power conversion system can boost multi-sources to drive a traction motor and to store energy at the same time reducing number of switching components. In this paper, all operational modes of the proposed converter are explained in detail and verified by a computer simulation first. Then, the topology and operational modes are experimentally verified. Based on the results, the feasibility of the proposed multi-mode single leg power conversion system for EV and HEV applications is discussed.