• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.138-145
• /
• 2017

With the increasing use of smart electronic devices, the size of the related I/O interface market is increasing rapidly. Demand is also growing for the continuous increase of data and video signals-such as faster data processing speed and data storage capacity-in the smart electronic device input/output interface market. Currently, the POF hybrid cable used in the smart electronic device input / output interface market cannot transmit over a long distance because the optical loss is too large, and the GOF hybrid cable is both vulnerable to bending and other sudden outside changes, and expensive. Therefore, in this study, the design and fabrication of a GOF hybrid cable and fiber guide were carried out in order to develop a cable which can easily withstand external impact, has low optical losses, and meets the demand for continuous data and video signal increase in the smart electronic device input / output interface market.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권3호
• /
• pp.57-61
• /
• 2007

The current limiting characteristics of hybrid SFCL with additional power electronic devices was investigated in order to improve operation reliabilities. The hybrid SFCL developed consists of a superconducting trigger (S/T) part, a fast switch (F/S) module and a current limiting (C/L) part. Although hybrid SFCL had shown a excellent current limiting characteristics, this device was rather vulnerable to the residual arc currents which could exist during fast switch operation. This undesirable arc should be extinguished as quickly as possible in order to implement perfect fault current commutation. So, in order to eliminate the residual arcs between fast switch contacts, the power electronic devices (IGBT or GTO) were connected in series between the S/T part and the interrupter of the F/S module. According to the fault tests conducting with an input voltage of $270\;V_{rms}$ and a fault current of $5\;kA_{rms}$, The power electronic devices could perfectly remove the arc generated between the contacts of the interrupter within 4 ms after the fault occurred. From the test analysis, it was confirmed that the hybrid SFCL could enhance the operation reliability by adopting additional power electronic devices.

• 한국결정성장학회지
• /
• 제23권5호
• /
• pp.235-240
• /
• 2013

그래핀(Graphene)은 전기 전도성 및 열전도성이 우수하고 1 nm 수준의 초 박막 형 필름 소재를 제조할 수 있다는 장점으로 인하여, 차세대 트랜지스터 소자 및 디스플레이 장치에 적용 가능한 방열 소재로서 많은 연구가 활발히 진행되고 있다. 또한 CVD(chemical vapor deposition)제조법으로 합성된 그래파이트(Graphite)는 구조의 단순성 및 유연성 때문에 안정하고 열에 강한 탄소계 방열소재로 주목 받고 있다. 본 연구는 열전도도가 우수한 폼(foam)형태의 구리를 촉매로 상압과 진공에서의 CVD법을 이용하여 그래핀을 성장시킨 후 구리 폼의 기공 안에 다양한 종류의 그래파이트(Natural graphite, expandable(/expanded) graphite, etc)를 복합 및 안정화시켜 기존보다 높은 열전도도를 가지는 방열소재를 개발하였다. 제조된 금속폼/그래파이트 소재를 OM(optical microscopy)과 SEM(scanning electron microscopy)을 이용하여 표면을 확인하였고 DSC(Differential Scanning Calorimetry), 아르키메데스 법을 활용한 비열, 밀도 결과를 확보하였다. 또한 LFA(Laser Flash Analysis)를 이용하여 열 확산계수 예측을 통한 열전도 특성을 평가하였다.

• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.51-54
• /
• 2015

An electro-plating technology on a cured isotropic conductive pattern with a hybrid Cu paste composed of resin matrix, copper, and solder powders has been developed. In a conventional technology, Ag paste was used to perform a conductive pattern on a PCB or silicon substrate. From previous research, the electrical conductive mechanism and principle of the hybrid Cu paste were concisely investigated. The isotropic conductive pattern on the PCB substrate was performed using screen-printing technology. The optimum electro-plating condition was experimentally determined by processing parameters such as the metal content of the hybrid Cu paste, applied current density, and time for the electroplating in the plating bath. The surfaces and cross-sections were observed using optical and SEM photographs. In conclusion, the optimized processing conditions for Cu electro-plating technology on the conductive pattern were a current density of $40mA/cm^2$ and a plating time of 20min on the hybrid Cu paste with a metal content of 44 vol.%. More details of the mechanical properties and processing conditions will be investigated in further research.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.197.2-197.2
• /
• 2010

The study on the operation characteristics of solar space and water heating system with ground source heat pump (GSHP) as a back-up device was carried out. This system, called solar thermal and geothermal hybrid system (ST/G), was installed at Zero Energy Solar House II (KIER ZeSH-II) in Korea Institute of Energy Research. This ST/G hybrid system was developed to supply all thermal load in a house by renewable energy. The purpose of this study is to find out that this system is optimized and operated normally for the heating load of ZeSH-II. Experiment was continued for seven months, from October to April. The analysis was conducted as followings ; - the contribution of solar thermal system. - the appropriateness of GSHP as a back-up device. - the performance of solar thermal and ground source heat pump system respectively. - the adaptation of thermal peak load - the operation characteristics of hybrid system under different weather conditions. Finally the complementary measures for the system simplification was referred for the commercialization of this hybrid system.

• 한국소음진동공학회논문집
• /
• 제21권1호
• /
• pp.56-65
• /
• 2011

A new hybrid mount system is proposed for microvibration control in a high-tech factory. The mount consists of an airspring as a passive device and a piezostack actuator as an active device. The two devices are connected in series. Some numerical simulations and experimental tests are carried out to evaluate isolation performance of the mount system comprising of four proposed hybrid mounts. As a control logic, the specific algorithm is adopted for considering multiple target frequencies of excitation based on a Filtered-X LMS algorithm. The results are compared with isolation performance of the passive airspring mount system. It is confirmed that the proposed hybrid mount system has great performance on microvibration.

• 전력전자학회논문지
• /
• 제17권6호
• /
• pp.523-531
• /
• 2012

This paper proposes a high efficiency power conversion system for battery-ultracapacitor hybrid energy storages. The proposed system has only one bidirectional dc-dc converter for hybrid power source with batteries and ultracapacitors. The hybrid power source has bidirectional switching circuits for selecting one energy storage device. Bidirectional power flow between the energy storage device and high voltage capacitor can be controlled by one bidirectional converter. An asymmetrical switching method is applied to the bidirectional converter for high power efficiency. Switching power losses are reduced by zero-voltage switching of power switches. System operation and design considerations are presented. The experimental results are provided to verify the performance of the proposed system.

• 드라이브 ㆍ 컨트롤
• /
• 제15권1호
• /
• pp.38-49
• /
• 2018

This research describes the development model and testing of a hybrid damper which can be applicable to a vehicle suspension. The hybrid damper is devised to improve the performance of a conventional passive oil damper using a magneto-rheological (MR) accumulator which consists of a gas accumulator and a MR device. The level of damping is continuously variable by the means of control in the applied current in a MR device fitted to a floating piston which separates the gas and the oil chamber. A simple MR device is used to resist the movement of floating piston. At first a mathematical model which describes all flows within the conventional oil damper is formulated, and then a small MR device is also devised and adopted to a mathematical model to characterize the performance of the device.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권9호
• /
• pp.531-538
• /
• 2005

This paper proposes an expert system which is able to enhance the accuracy and productivity by determining the test strategy based on heuristic rules for test of the hybrid electronic circuit board producted massively in production line. The test heuristic rules are obtained from test system designer, test experts and experimental results. The guarding method separating the tested device with circumference circuit of the device is adopted to enhance the accuracy of measurements in the test of analog devices. This guarding method can reduce the error occurring due to the voltage drop in both the signal input line and the measuring line by utilizing heuristic rules considering the device impedance and the parallel impedance. Also, PSA(Parallel Signature Analysis) technique Is applied for test of the digital devices and circuits. In the PSA technique, the real-time test of the high integrated device is possible by minimizing the test time forcing n bit output stream from the tested device to LFSR continuously. It is implemented in Visual C++ computer language for the purpose of the implementation of the inference engine using the dynamic memory allocation technique, the interface with the electronic circuit database and the hardware direct control. Finally, the effectiveness of the builded expert system is proved by simulating the several faults occurring in the mounting process the electronic devices to the surface of PCB for a typical hybrid electronic board and by identifying the results.

• 디지털콘텐츠학회 논문지
• /
• 제9권4호
• /
• pp.771-778
• /
• 2008

하이브리드 렌더링 모델에서 적절한 수준을 결정하기 위한 단말기 성능분석 방법을 제안한다. 최근에 하나의 물체를 이루는 여러 개의 폴리곤에 각각 다른 음영법을 함께 적용하는 하이브리드 렌더링 모델을 제안하였다. 하이브리드 렌더링 모델에서 고로 음영과 평면 음영이 적용될 폴리곤 수는 그래픽 콘텐츠가 실행되는 단말기의 성능과 상황에 맞도록 계산되어져야 한다. 따라서 현재의 단말기 환경에 대한 성능 분석과 사용자의 선호도 등을 고려하여 자동적으로 실행 가능한 적절한 메시의 수와 고로 음영과 평면 음영의 정도를 계산해 내는 방법을 제안하였다. 하이브리드 렌더링의 개념자체는 간단하지만 실행 환경에 따라 여러 단계의 해상도를 자동적으로 가질 수 있으므로 실시간 렌더링 시간을 줄일 수 있는 효율적인 대안 방법이 될 수 있다. 또한 다양한 단말기 환경에서 게임과 같은 3차원 그래픽 콘텐츠의 실시간 적응 서비스에 적용할 수 있다.